To clean toilet stains, pour one cup of hydrogen peroxide around the surface and let it sit for 30 minutes to lighten stains. Use a scrub brush to loosen stubborn stains, then sprinkle baking soda around the bowl and use the brush again. Flush the toilet several times to remove the peroxide and baking soda mixture.
To avoid getting a very stained toilet bowl, clean your toilet regularly and tackle each type of stain head-on with effective and accessible cleaning methods. Remove water from the toilet bowl using a cup or sponge to avoid diluting the cleaning solution. For removing brown stains, mix white vinegar and baking soda, as baking soda is mildly abrasive and deodorizing.
For the outside of the toilet, use an all-purpose bathroom disinfecting spray like Lysol Power Bathroom Foamer. Mix 2 cups of vinegar into the toilet bowl, ensuring it touches the stained areas, and use a toilet brush to scrub the problem areas. Let it set for at least two hours.
For a one-stop cleaning solution, pour one cup of bleach around the bowl and tackle every inch with a toilet brush or handheld scrub brush. Let it sit for five minutes, then flush. Zep acidic toilet bowl cleaner is available for less than $5.00 for a 32oz bottle.
To get rid of toilet bowl stains, pour 1 or 2 cups of white distilled vinegar into the toilet bowl and sprinkle baking soda. Wait about 15 minutes for the acid to work its magic. You can also leave a can of coke in the toilet bowl and let the acid work its magic.
To clean a toilet rim, use a disinfectant wipe for regular cleaning or brush using a stain remover for heavy stains and dirt. A disinfectant cleaner, like bleach, can help dissolve the stain.
📹 How to Clean Toilet Bowl Stains With Baking Soda & Vinegar
Hard water can quickly build up on toilets, sinks and taps and over time can leave rust and scale stains that are very unsightly and …
How do you get deep stains out of a toilet bowl?
To clean a toilet bowl, pour vinegar into the bowl, mix with a toilet brush, and add baking soda to the coated areas. Wait 10 minutes for the baking soda and vinegar to interact, then use a toilet brush to move the solution around the bowl, focusing on hard stains. After letting the solution sit, use a stiff brush to scrub away any remaining stains.
Adding soda to the toilet bowl can help eliminate stubborn stains. Start by flushing the toilet to empty the bowl and close the flapper, or turn off the water at the shutoff valve and flush the toilet. Fill the bowl with cola and let it sit for an hour to absorb the stains. The next day, flush the soda down the toilet and use a stiff brush or pumice stone to scrub away any remaining residue.
How do you deep clean the outside of a toilet?
- Roll up your sleeves and put on long rubber gloves.
- Squeeze the toilet bowl cleaner into the bowl in a circular motion, targeting the upper interior sides and covering the entire surface, including under the rim.
- Let the cleaner set for five to 10 minutes.
- Scrub the entire surface with a toilet brush, paying special attention to stains or buildup.
- Flush the toilet to rinse away the cleaner and any loosened dirt, grime, and mineral deposits.
- Use a pumice stone to gently scrub away hard water mineral deposits, creating a ring where the water level rests.
- Wipe down the exterior of the toilet with disinfectant spray and paper towels, or with a disinfectant wipe.
- Peel off your gloves right away and give your gloved hands a good scrubbing with soap and hot water. Toss disposable gloves or let non-disposable gloves air dry.
- Wipe down the toilet’s exterior daily, including the entire exterior of the bowl, top of the tank, pedestal, and handle.
By following these steps, you can ensure a clean and hygienic toilet experience.
How do you clean a toilet that has been stained for years?
To remove hard water stains from a toilet, follow these steps:
- Empty the bowl by flushing to reduce water levels.
- Pour white vinegar into the bowl to cover the stained areas.
- Let the vinegar soak for 30 minutes to an hour to break down mineral deposits and stains.
- Use a toilet brush to scrub the stained areas with the vinegar. If the vinegar doesn’t completely remove the stains, sprinkle baking soda on them and let it sit for up to 10 minutes.
- Scrub the bowl again with a wet toilet brush, paying attention to the baking soda areas.
- Rinse and repeat the process if necessary. If the stains don’t completely disappear, repeat the process or consider using a pumice stone.
- Use a pumice stone for stubborn stains, but be careful not to scratch the porcelain.
- Regularly use a toilet bowl cleaner designed to combat hard water deposits to prevent hard water stains from forming.
For toilet ring stains, use vinegar and baking soda, squeeze lemon juice from a lemon covering the ring, sprinkle Borax powder on the ring, let it sit for a few hours, scrub the ring with a toilet brush, and flush to remove the mixture.
How to clean an extremely dirty toilet bowl?
To clean stains in a toilet bowl, use vinegar, baking soda, and vinegar to create a fizzing solution. Scrub stains with a toothbrush and let it sit for 10 minutes. Rinse with water.
To clean shower curtains, remove the curtain and liner, wash them in the washing machine with regular detergent, baking soda, and towels. Add distilled white vinegar during the rinse cycle. This method is easy and effective, even if you spot mildew or mold. Don’t discard dirty shower curtains, as they can be easily cleaned with a simple solution.
How to clean a toilet that is brown and stained?
Citric acid, a more acidic solution extracted from certain moulds, is more effective than vinegar in removing brown stain in the toilet. To use, pour boiling water into the bowl, add 250ml of citric acid, and leave it for hours, preferably overnight. The next day, scrub and flush. Dishwasher tablets can also be used to remove brown stain on the bottom of the toilet bowl. Dissolve the tablets, brush them with a toilet brush, and let them sit for as long as possible. Scrub, flush, and inspect the stain.
How do you get thick brown stains out of a toilet?
Dishwasher tablets can be employed for the removal of brown stains on the lower surface of a toilet bowl. The tablet should be dissolved, a toothbrush should be used to scrub the affected area, and the solution should be left to act for a period of time. Following the rinsing and flushing of the toilet, the stain should have disappeared. The least desirable solution is to insert one’s hands into the toilet bowl.
How do I get rid of brown limescale in my toilet?
Vinegar is an effective solution for limescale in toilets due to its acidic properties. It can be applied to the entire bowl and affected surfaces, and if the buildup is thick, leave it overnight. After scrubbing the bowl with a toilet brush, flush the chemicals to remove all limescale. If any marks remain after the first flush, repeat steps 1-4 until the marks are gone.
To prevent hard water stains and limescale in toilets, keep the water soft. Water softeners/filtration systems can help maintain long-term cleanliness in your home and appliances. Hard water is the culprit for these issues, so using water softeners or filtration systems can help prevent these issues.
What removes brown limescale from toilet?
White vinegar is a powerful solution for removing limescale from toilets, but it requires elbow grease. Its acidic properties soften limescale, making it easier to scrub clean. Pour undiluted white vinegar into the toilet bowl, covering it under the rim where it often gathers. Leave it for three to four hours, then scrub with a brush. If necessary, flush the toilet.
Domestos Zero Limescale Toilet Gel is a 3x thicker formula that removes 100% of limescale and kills 99. 9% of all known germs, leaving the toilet sparkling clean, fresh, and smelling fresh. Squirt the gel evenly around the rim, leave it for 30 minutes, and flush or scrub if the limescale is difficult to remove. Repeat if necessary.
To prevent limescale buildup, use Toilet Rim Blocks or follow Thick Bleach instructions to prevent limescale on other surfaces around the home. These methods will leave the toilet sparkling clean, fresh, and smelling good.
How do you get hard buildup off a toilet bowl?
Hard water can cause limescale in toilets, which are white, chalky deposits that stick to faucets, kettles, shower heads, and inside toilet bowls. To remove limescale, scoop out water from the bowl, pour lemon juice or vinegar on the deposits, leave them in place for a few hours, and scrub the scale with a stiff-bristled toilet brush before flushing the toilet.
To keep your toilet sparkling and pristine, use homemade products or specialized toilet cleaners. Acidic liquids like vinegar and lemon juice can dissolve hard mineral deposits in your toilet, making them more effective than regular cleaners. Homemade toilet cleaners can be found in kitchen cupboards and can help remove mild cases of limescale.
In summary, hard water can cause limescale, which can be removed using homemade products or specialized toilet cleaners.
What is the best cleaner for the outside of a toilet?
KOHLER Toilet Cleaner and Disinfectant is recommended for use on both the interior and exterior of the toilet bowl for optimal cleansing and disinfection, thereby ensuring the bowl remains hygienic and free of contamination.
📹 Easy Way to Clean Toilet Bowl Stains | Remove Toilet Hard Water Calcium Deposit Without Scrubbing
How to clean toilet quickly from hard water deposits that caused by high concentration of dissolved minerals like magnesium, …
I tried this method & also used a scouring stick & it works! My toilets were worse then the article. The blue Clorox was stained in on the hard water spots! This method help loosen the hard water stains & made cleaning with the scouring stick so much easier. I cleaned 2 toilets & now on my 3rd. Thank You for posting this article! My toilets look brand new!!
FINALLY! For years, I struggled with an extremely tough waterline stain and today…it’s history! Twice, I had to do the recommended procedure, and THEN scrub with an SOS pad as though my life depended on it. I beat that sucker!:face-blue-wide-eyes: 😂 However, I have a very faint blue shade where I scrubbed so hard. I can live with that! I used apple cider vinegar; would white vinegar have been better?
I have a family member that never cleans the toilet in their bathroom and they have severe hard water stains in their toilet and this vinegar and baking soda mixture did NOTHING. The stains were still there and what it did do was maybe deodorize the smelly toilet other than that there were no good results. I had to go to a special cleaning store in my area and purchase a very dangerous toilet cleaner with warning labels all over it but it worked though.
Why do people insist on recommending using an acid (vinegar) and a base (baking soda) at the same time? The “fizzing” you report is the baking soda and vinegar NEUTRALIZING EACH OTHER!!! Making useless salt. Use an acid, or use a base, at a time. Basically, if you use more baking soda then vinegar, you are just cleaning with baking soda. If you use more vinegar than baking soda, then you are just cleaning with vinegar. Except less of either than you put in because you have neutralized most of it by mixing them together.
I’ve seen this on other YouTube websites doesn’t work. I’ve also tried OxiClean and vinegar I’ve tried Coca-Cola a toilet manufacturer told me that and none of this works at all. When you have hard water stains they just sit there. But somebody mentions vinegar and borax hey those 20 meals must be pretty strong I might try that. Because borax has other uses. Especially if you have a flea infestation it’s safe to use on your carpets and the vinegar is good to clean your drip coffee maker out every month.
You don’t even need the baking soda! Vinegar is ALL you need!!! Just let it sit for a long while, then scrub away. Adding baking soda is a fun science experiment, but it just cancels out the effects of the vinegar! I think the combo of the 2 is better for a clogged drain, where the bubbling action helps to release things from sticking to the inner wall of your pipes. 🙂
Wow!! It worked! I waited until after I tried it to give it a thumbs up. I’ll be honest, I had real doubts even though the toilet paper showed he didn’t scrub. I didn’t even have the concentrated bleach yet so I used the regular bleach and baking soda. I really wasn’t sure it would work because regular bleach is so runny. I used a generous amount of baking soda up the sides. I guess the bleach soaks into the baking soda and “climbs” up the side to create a pasta. Really, no scrubbing. One toilet came out completely clean, the other still had a slight ring from our hard water. Can’t wait to see how much better this is with the right bleach! Thanks so much!
I’m not totally convinced. I feel as if this did help but you still need to scrub. The bleach lightened the stain but the dirt is still there. It didn’t lift all of the dirt away. It’s just invisible now. I think this is a good starting point for a toilet that hasn’t been cleaned in ages but there should be more follow through. JMO
I intend to try this, but what doesn’t seem to make sense here, is that the most visible top edge of the stain never has any contact at all with the bi-carb soda, because the water line is too low. The stain top edge only has the bleach briefly poured over it. And yet we see the stain disappear. So, what was the point of adding the soda, if the heavy bleach alone, supposedly removed the ring stain? –Again, the water level was too low to begin with. It should have covered all the stained area.
I tried it with swimming pool chlorine, you can buy at swimming pool supply stores. It has 12.5% sodium hydrochlorite, higher than the one he used. I sprinkled baking soda on the bowl after plunging out most of the water. Then with a spray bottle, I misted the area thoroughly. It cleaned it pretty damn good, except the hardwater ring in the bowl only faded. It was light enough to not be noticeable while the water is full. After a couple of treatments, I scrubbed that faded ring with a pumice stone they sell at Walmart or Home Depot. Ring is gone, toilet looks like new! Works great on porcelain sinks too!
To get the best result, you MUST use baking soda with Thick Bleach (Concentrated Bleach) that contains active ingredients of Sodium Hypochlorite 52g/L, Chlorine 5%, and Sodium Hydroxide 13g/L. Numbers doesn’t need to be exact, but something around those numbers. It WON’t work as good with standard or regular bleach.
Second update: I realized I could have killed myself mixing bleach and vinegar so don’t do it!!!!☠️💀☠️😐 //Update! It worked after I added 6% acidic vinegar (regular cleaning vinegar or any old vinegar would work as I have found out) because what I had was regular chlorax and not the concentration you recommended. But! Regular chlorax, with baking soda, and vinegar completely removed a stubborn stain that looked very gross and has been there since we bought the house. Thank you! _____ Can’t wait to try this!!!😍 I have disgusting stains that won’t go away with vinegar and baking soda
i found the article’s recommendation didn’t quite do it. I did find an inexpensive product that worked called Lime out. it contained a low concentration of hydrochloric acid, citric acid and lactic acid. i did put toilet paper over the stain and saturated it with the product. then a light scrub with the toilet brush after letting it react for an hour. the stain gone. only use it on unchipped/damaged porcelain not metal or marble or other stone.
I never screwed my toilet and I just use paper towel and wipe it gently with Mr scrubs bubbles in the white and green can and wipe it as best as I can unless it for 5 minutes and it still has brown stains in it from the holes inside the toilet with the water and bleach doesn’t work I tried bleach and nothing works to clean it out the toilet is 26 years old and they won’t replace it I’m not mad but I’m just saying this wipe it clean with Mr scrub bubbles it’s owned by a apartment place let the janitors and landlord take care of it is there a problem why won’t they replace a 26-year-old no replace the parts but they won’t replace the actual toilet
Well I don’t know where I would buy thick bleach where I live. I only know of Clorox maybe I could get something similar in a box maybe that would help. Never heard of thick bleach. But I need to do something because I have that same problem and I cannot get rid of the hard water stains. I’ve tried everything on this website and nothing works and I have septic so I can’t pour anything down. But I’ll give this a try.
Lysol toilet Bowl cleaner, get all water out. Fill with lysol toilet Bowl cleaner. Leave sit for 30 minutes. Then flush. When normally cleaner you toilet. Leave the cleaner in it for a little while. Let the cleaner do its job. Then light scrub with brush and flush. Lysol toilet Bowl cleaner has hydrochloric acid in it.