How To Keep The Toilet’S Exterior Clean?

To clean the outside of your toilet, follow these steps:

  1. Wipe down the exterior with a sponge and hot water to remove dirt.
  2. Spray toilet cleaner over the entire toilet, including the lid, seat, outside, and base.
  3. Clean the outside of the toilet with a disinfecting bathroom cleaner, starting at the top and spraying the tank, handle, and bowl edges.
  4. Allow the product to work for a few minutes before wiping the surfaces with a cloth or kitchen roll.
  5. Gather supplies, such as a pumice stone, to help remove surface stains from the toilet.
  6. Use an all-purpose bathroom disinfecting spray or wipes to clean the exterior surfaces and the area around the toilet, such as the tank, seat, bowl’s exterior, and floor.

To clean the seat and lid, fill the bowl with toilet bowl cleaner and allow it to fully soak while cleaning the exterior. Wipe down the exterior with disinfectant spray and paper towels, or with a disinfectant wipe.

When cleaning the interior of the bowl, use a rag and 404 spray, which can be washed with bleach and reused. Forté recommends using an all-purpose bathroom disinfecting spray like Lysol Power Bathroom Foamer.

To clean the exterior, use a toilet brush to get under the rim and over stains above the water line. Let this sit for 10 to 30 minutes to break down the stains.

For the exterior, spray the brush head with disinfectant, wait a minute, and rinse it with hot water in your tub. The best solution is a pumice stone, a natural volcanic rock that effectively removes surface stains in toilets.

Flush your toilet to remove excess grime, apply a generous amount of product directly onto the stains, let it soak for 15 minutes, and then spray outside the toilet with an antibacterial spray. Squirt toilet bowl cleaner inside the bowl and scrub with a toilet brush while the cleaner is working.


📹 How to Clean a Toilet

There is more to cleaning a toilet than just the bowl. People hate cleaning toilets but avoiding it isn’t going to make it any better.


What should I use to clean the outside of my toilet?

After cleaning the bowl, use Lysol® Power Bathroom Cleaner to clean the outside of the toilet, including under the seat and hard-to-reach areas. Use Lysol® Power Bathroom Cleaner and a paper towel to clean the toilet’s knobs and seat-retaining knobs. Finally, use Lysol® Disinfecting Wipes to clean the lid and flush handle. These cleaners are suitable for toilet bowls, bidets, urinals, porcelain, and vitreous china. For removing stains and toilet rings around the bowl, refer to the best specific stain removal tips.

What is the best cleaner for urine around the toilet?

Enzyme-based cleaners are effective tools for deep cleaning and odor removal in bathrooms. They contain enzymes that break down urine molecules, including proteins and uric acid, eliminating the source of odors. Regular use of these cleaners, at least once a week, can prevent odor buildup and maintain a fresh restroom environment. Additionally, upgrading bathroom fixtures can significantly reduce areas where urine can collect and odors can develop.

How do you clean the dirtiest toilet?
(Image Source: Pixabay.com)

How do you clean the dirtiest toilet?

To clean stains in a toilet bowl, use vinegar, baking soda, and vinegar to create a fizzing solution. Scrub stains with a toothbrush and let it sit for 10 minutes. Rinse with water.

To clean shower curtains, remove the curtain and liner, wash them in the washing machine with regular detergent, baking soda, and towels. Add distilled white vinegar during the rinse cycle. This method is easy and effective, even if you spot mildew or mold. Don’t discard dirty shower curtains, as they can be easily cleaned with a simple solution.

What is the most hygienic way to clean a toilet?

To clean a toilet bowl, use Clorox Toilet Bowl Cleaner with Bleach, a disinfectant product, and a toilet brush to scrub away stains and deposits. Allow the cleaner to sit for five minutes before flushing it away. If you run out of cleaner, use half a cup of bleach and scrub the sides and beneath the rim. For the outside of the toilet, use an all-purpose bathroom disinfecting spray like Lysol Power Bathroom Foamer, which sanitizes hard surfaces in 30 seconds and disinfects them in 10 minutes. Forté recommends using rubber gloves, a clean and disinfectant product, and a clean toilet brush for a thorough cleaning process.

What is the best way to clean a very dirty toilet?

Vinegar is a safe and milder alternative to caustic cleaners designed for toilets, as they can kill good bacteria in the septic system. To clean toilet bowls safely and inexpensively, pour vinegar and baking soda into the bowl, scrub it, let it soak for 30 minutes, and flush. Keep vinegar at home for cleaning many surfaces, and order a six-page vinegar pamphlet for a list of uses. For stubborn stains, use undiluted vinegar directly and scrub with a brush. To help guests, color code two wall switches in bathrooms: one for lights, one for the exhaust fan, and one for the heater. This will make it easier for guests to find the switch they need.

What do professionals use to clean toilets?

Professional cleaners use household supplies like toilet-bowl cleaner, disinfectant wipes, rubber gloves, and nonscratch scrub sponges, microfiber cloths, or paper towels. Handheld scrub brushes or pumice stones can tackle tough stains, while emery cloths provide more power. Heavy-duty acid solutions may be necessary for serious hard-water buildup, but these are dangerous and should only be applied by a professional.

How to clean a badly stained toilet?

Half a cup of hydrogen peroxide should be poured into the toilet and left to sit for approximately 30 minutes. The next step is to scrub the stains with a toilet brush. Should the stains persist, it is recommended to add baking soda. Finally, the toilet should be flushed with water to remove any remaining germs.

What is the best cleaner for the outside of a toilet?

KOHLER Toilet Cleaner and Disinfectant is recommended for use on both the interior and exterior of the toilet bowl for optimal cleansing and disinfection, thereby ensuring the bowl remains hygienic and free of contamination.

How can I clean tough buildup in my toilet?
(Image Source: Pixabay.com)

How can I clean tough buildup in my toilet?

To remove hard water stains from a toilet, follow these steps:

  1. Empty the bowl by flushing to reduce water levels.
  2. Pour white vinegar into the bowl to cover the stained areas.
  3. Let the vinegar soak for 30 minutes to an hour to break down mineral deposits and stains.
  4. Use a toilet brush to scrub the stained areas with the vinegar. If the vinegar doesn’t completely remove the stains, sprinkle baking soda on them and let it sit for up to 10 minutes.
  5. Scrub the bowl again with a wet toilet brush, paying attention to the baking soda areas.
  6. Rinse and repeat the process if necessary. If the stains don’t completely disappear, repeat the process or consider using a pumice stone.
  7. Use a pumice stone for stubborn stains, but be careful not to scratch the porcelain.
  8. Regularly use a toilet bowl cleaner designed to combat hard water deposits to prevent hard water stains from forming.

For toilet ring stains, use vinegar and baking soda, squeeze lemon juice from a lemon covering the ring, sprinkle Borax powder on the ring, let it sit for a few hours, scrub the ring with a toilet brush, and flush to remove the mixture.

Does vinegar disinfect toilets?

A mixture of baking soda and vinegar can effectively clean bathrooms. For toilets, pour vinegar in the bowl and let it sit overnight. The next day, sprinkle baking soda and scrub. For drains, pour 100ml of distilled white vinegar around the closed drain and leave it for a few hours. Scrub and drain the area. For showers, boil vinegar, wipe down doors and walls, keep them wet, and dampen a non-scratch sponge or cloth with vinegar. Scrub and rinse to remove germs, mold, water spots, and scum.

How do professionals clean toilets?
(Image Source: Pixabay.com)

How do professionals clean toilets?

Professional cleaners use household supplies like toilet-bowl cleaner, disinfectant wipes, rubber gloves, and nonscratch scrub sponges, microfiber cloths, or paper towels. Handheld scrub brushes or pumice stones can tackle tough stains, while emery cloths provide more power. Heavy-duty acid solutions may be necessary for serious hard-water buildup, but these are dangerous and should only be applied by a professional.


📹 Cleaning outside the toilet

Cleaning outside toilet professional home cleaning course available at my.luxuryhomedecorllc.com.


How To Keep The Toilet'S Exterior Clean
(Image Source: Pixabay.com)

Rafaela Priori Gutler

Hi, I’m Rafaela Priori Gutler, a passionate interior designer and DIY enthusiast. I love transforming spaces into beautiful, functional havens through creative decor and practical advice. Whether it’s a small DIY project or a full home makeover, I’m here to share my tips, tricks, and inspiration to help you design the space of your dreams. Let’s make your home as unique as you are!

Email: [email protected], [email protected]

About me

1 comment

Your email address will not be published. Required fields are marked *

  • Something I learned from doing bio clean up: You have to clean first then disinfect. Use an all purpose cleaner first, then use bleach. This will prevent the chloramine gas reaction because most of the urine will be cleaned up before the bleaching. Let the area stay wet with the bleach for five minutes then wipe up. I use cheap white rags and bleach them in the washer when I’m done cleaning.

Pin It on Pinterest

We use cookies in order to give you the best possible experience on our website. By continuing to use this site, you agree to our use of cookies.
Accept
Privacy Policy