Hydrogen peroxide is a powerful cleaning agent that can effectively remove tough stains and buildup under the rim of your toilet. To use it, pour hydrogen peroxide into the bowl and let it sit for a few minutes before using a brush to scrub the underside of the rim thoroughly. This method is safe and won’t harm your plumbing.
To clean light dirt, stains, grime, mold, mildew, and other microorganisms under the toilet bowl rim, use bleach or bleach-based household cleaner and a brush. Bleach acts as a disinfectant and an effective cleaner, while vinegar can be used in place of bleach.
To clean toilet jets on the underside of a toilet rim, follow these steps: sprinkle baking soda around the underside of the rim, pour white vinegar over the baking soda to create a fizzing reaction that helps break down dirt. Use a toilet brush with firm grit to clean the rim.
To disinfect surfaces, fill a spray bottle with hydrogen peroxide and spray it on toilet surfaces, including handles, seats, and the rim. Allow it to sit for a few minutes before wiping clean with a damp cloth.
Hydrogen peroxide solutions can be safely disposed of with no special treatment, and you can safely pour them down the drain of a sink or into a toilet. For hard water stains and calcium buildup, use a stronger all-purpose cleaner with hydrogen peroxide or bleach.
A vinegar and soda solution can effectively tackle most toilet bowl stains, including hard water and mineral stains. It is recommended to use toilet bowl cleaners containing hydrogen peroxide, bleach, or both to achieve the same cleaning results.
📹 Dump Hydrogen Peroxide into your Toilet Tank & WATCH WHAT HAPPENS 💥 (better than vinegar!)
THIS is one hydrogen peroxide hack you wish you knew sooner (and it’s even better than vinegar). If you love cool cleaning hacks …
What can I use to clean the rims of my toilet bowl?
To clean limescale from the toilet rim and toilet rim jets, use Lysol® Toilet Bowl Cleaner with Lime and Rust Remover. Flush to remove excess dirt and grime before cleaning and disinfecting. The toilet rim holds the toilet rim jets, which are where water from the flush tank comes through. Start by wiping the surface of the rim with a Lysol® Disinfecting Wipe and follow the instructions to prevent bacteria buildup underneath.
When cleaning the toilet bowl, it is crucial to clean under the rim. Use Lysol® Power Toilet Bowl Cleaner, which cleans and disinfects the entire toilet and is angled to hit toughest stains directly under the rim. Follow the steps below to sanitize and disinfect the toilet.
Will hydrogen peroxide dissolve toilet paper?
The use of bleach and other chemical agents, such as sodium hypochlorite or hydrogen peroxide, has proven effective in the dissolution of toilet paper clogs in drainage systems and pipes. These substances facilitate the breakdown of the fibers in toilet paper, thereby enabling the flushing of the remaining material without further complications. To utilize these chemical agents, it is necessary to dispense a substantial quantity of the chemical onto the obstruction.
How to remove hard water stains from toilet bowl rim?
A Borax and Vinegar Paste can be created by mixing laundry borax and distilled white vinegar in a small bowl. Apply the paste to hard water stains, ensuring to apply it under the rim. Allow the paste to work for 20 to 30 minutes. This method is suitable for beginners and can be completed in 30 minutes. Hard water stains can be caused by high levels of minerals in water from municipal systems and wells, which can cling to surfaces as rusty or chalky white stains.
While toilet bowl cleaner can remove hard water stains, using elbow grease and patience can also be effective. To prevent stains from reappearing, follow these tips and learn how to clean and prevent them.
How to get rid of dark rings in toilet bowl?
Toilet bowl rings are a common issue in bathrooms, often caused by buildup or water problems. To remove these stains, follow these steps:
- Clean the toilet with a brush, removing any existing gunk.
- Pour 1 cup of vinegar into the bowl, then add 1 cup of baking soda, paying close attention to the ring.
- Add 2 more cups of vinegar, scrub with a toilet brush, and flush.
To determine the cause of a ring, try using a mixture of white vinegar and baking soda. This non-toxic cleaning solution is gentle yet abrasive, but only if used in large amounts and left to sit for at least half an hour.
TikTok influencer Lora McLaughlin recommends using one cup of baking soda and three cups of vinegar. This combination is effective for even the toughest stains on ceramic surfaces.
In summary, removing stains in the innermost part of the toilet bowl can be challenging, but using a mixture of vinegar and baking soda can help eliminate any stain without intense scrubbing.
How to get rid of black stuff under a toilet rim?
White vinegar and baking soda are effective for mineral deposits and bacteria-induced stains. Mix vinegar and baking soda in a toilet bowl, let it fizz for 10-15 minutes, and scrub with a toothbrush. Borax paste, made by mixing borax powder with water, can be used to tackle tough stains. Allow it to sit for 15-20 minutes, then scrub with a brush or pumice stone. Flush the toilet to rinse away residue. Lemon juice and salt are also natural stains removers.
Citric acid in lemon juice breaks down the stain, while salt acts as a gentle abrasive. Apply a mixture of lemon juice and salt to the stain, let it sit, scrub, and flush. This method not only cleans but also leaves a fresh scent.
What is the best cleaner for toilet bowl rings?
To remove toilet bowl rings, turn off the water valve and flush to empty the water bowl. Apply a cleaning agent to a wet sponge using powder cleaners like Bon Ami or Bar Keepers Friend. These products create a thick scouring paste when mixed with water, which can be applied to a wet sponge, mixed in a small bowl with water, or directly to a wet surface. The Pink Stuff is a cream formula that can be applied directly to a wet sponge. This method effectively removes stains caused by mineral buildup.
How to get rid of black mold in toilet bowl rim?
A solution of vinegar and baking soda can be prepared and subsequently sprayed onto the molds in order to prevent the growth of spores. The solution should then be transferred into the bottle using a funnel.
Is hydrogen peroxide safe to clean toilet bowl?
To remove hard water stains from toilet bowls, mix hydrogen peroxide with baking soda to form a paste and apply it to affected areas. Rinse gently before rinsing. For disinfecting surfaces, spray hydrogen peroxide on handles, seats, and rims, allowing it to sit for a few minutes before wiping clean. For odor elimination, pour a cup of hydrogen peroxide into the bowl and let it sit for an hour or more, as its oxygenating properties help neutralize unpleasant odors.
What should I use to clean the inside of my toilet bowl?
Professional cleaners use household supplies like toilet-bowl cleaner, disinfectant wipes, rubber gloves, and nonscratch scrub sponges, microfiber cloths, or paper towels. Handheld scrub brushes or pumice stones can tackle tough stains, while emery cloths provide more power. Heavy-duty acid solutions may be necessary for serious hard-water buildup, but these are dangerous and should only be applied by a professional.
How do you clean the inside ring of a toilet?
Baking soda and vinegar are effective in cleaning hard water stains and toilet rings when used strategically. Mix 1 cup of white vinegar with baking soda, then two more cups of vinegar, swishing the mixture around for 10 minutes. Squeeze more to reach stains above the waterline and under the rim, but don’t flush. Let the solution sit for 30 minutes, occasionally swishing, until stains are gone. Scrub any remaining stains with a toilet brush or sponge, then flush the toilet to rinse.
Baking soda, with its NaHCO3 chemical formula, is a base and acid counterpart, making it ideal for baking and cleaning tasks. On the other hand, vinegar, known as acetic acid (CH3COOH), has high acidity and low pH, making it ideal for tough debris removal. When mixed, a chemical dance occurs, making the mixture powerful and effective.
📹 Why Does THIS Keep Coming Back and How to STOP it
How to deal with stain under toilet rim Cleaning vinegar: https://amzn.to/3TEJPKa Toilet wand: https://amzn.to/4efNrKL Toilet …
I had some old “outdated” hydrogen peroxide under the bathroom sink. Not needing it anymore I dumped half the bottle down the toilet with the intention of getting rid of it. Well, the next day some nasty hardened sub water-line stains in the toilet that I had tried many times unsuccessfully to remove had simply disappeared.
Not relevant to the topic, but H2O2, hydrogen peroxide, takes blood out of most fabrics. No stain or residue. Most women know that. We used gallons of it in the ER where I worked for over 20 years. It is wonderful at removing so many stains etc and isn’t expensive nor as environmentally nasty as commercial toilet cleaners. Haven’t used them in ages! Great stuff.
Two things I use to clean my bathroom sink and toilet: a spray bottle of peroxide and a spray bottle of rubbing alcohol. I put one drop of sawn dish liquid in the alcohol and a few drops of essential oils. Alcohol kills everything and leaves it so clean it actually squeaks. Peroxide is great for spraying around the sink faucet as it gets into the nooks and crannies and sizzles up, killing any little nasties hiding in the crevices. Both are very cheap and when the alcohol smell dissipates, the bathroom is deodorized. Tub is a paste made of dish liquid and baking soda or plain old Soft Scrub with bleach. I no longer buy fancy cleaners and everything stays nice for longer.
Smart Health workers know about hydrogen peroxide works on blood stains. My dentist advise me not to buy expensive bottles of mouthwash (to much alcohol) use water and couple of drops of hydrogen peroxide (never swallow), mix according to your liking because you might swallow a little on your throat and you will not like it at all. You can also use denture cleaner on your toilet bowl. Have a clean suave day EVERYONE. Thanks for all the tips and sharing.
Great idea Thank you so much!!! I always have hydrogen peroxide in the house but now I need more to clean my toilets. We have city water and it is terrible I always have pink & black mold under my faucets (I use rubbing alcohol for those) But I pay a lot of money every month for water and it should be clean water but it’s the opposite! Cleaning coffee pots andI have no clue what is growing in the water hoses to my fridge & ice maker the thought of it drives me crazy!!!!
I love the drop-in sanitation products because it keeps me in work replacing the rubber seals destroyed by chlorine. Chlorine cuts the life of the toilet tank seals and refill mechanism from a decade or two down to maybe two or three years if you’re lucky. I appreciate you don’t want your kids eating a toilet cake, but honestly, there are better solutions to bathroom hygiene! Hydrogen peroxide, which is heavily diluted in the form shown, is a solution I personally use, although I typically turn off the water to the tank, drain and then douse liberally with the peroxide. As for the bowl, this should be cleaned regularly, including the spaces around the toilet if you have a man in the house!
By the way.. That BROWN bottle of Hydrogen Peroxide is NOT FOOD GRADE …..so you can NOT use that type on your mouth, teeth or internally at all. You have to ORDER the WHITE BOTTLE LABLED FOOF GRADE HYDROGEN PEROXIDE. It is still 3%..same as the brown bottle, but there is a difference..Bit of a difference in price also. Just so everyone realizes the difference. Brown bottle = regular White bottle = FOOD GRADE ONLY. I’ve never found a food grade in ANY store either.only on line
Something better, use The Works tablet or pool chlorine tablet (the small ones, used a small floater) make sure it does not interfere with the mechanism, no brushing needed. I’ve been using it for decades with no problems and last longer than peroxide. Another one is Tide laundry pod/ 1/4 cup of liquid Tide original (no perfume, once every three/four months) place in the tank till dissolve, stir water in tank, then wait an hour before flashing.
Oh man… there’s a layer of brown crud on everything in there… it’s everywhere… ugh, ok, I can do it. I have a really great dish brush (that always sits in the Bucket of Mordor lest it get confused with the kitchen brushes) that is raring to go! Um… should I be wearing my mask…? Do I want to know what that is in there?
My 95 year mom said always keep a case of hydroperoxide handy. That you never know when you need to clean up some blood or a lot of blood. That it works better than bleach with no left over bits or residue. Sweet little old lady my Aunt Fanny ( nice way to say ass). She has a history that she is waiting until the right time to tell us. Apparently, one of us has all the time in the world. Ok now one to the trick for cleaning my oven to look like new.
I cannot get the piss stains from the 2 boys in my house that splatter piss and i dont notice right away under the seat..ive tried bleach ive tried vinegar..ive tried the toilet bowl cleaner u put in the toilet bowl under the lid… im gonna try the peroxide underseat see if that helps..ive found anything i use iys removing the freaking paint on my seat
The golden rule for your toilet is to not use anything in the tank, but only in the bowl or you’ll ruin your seal over time. It’s up to you if you want to replace parts more frequently. Take those ingredients place them in an empty container, shake the bottle, pour into your bowl, and scrub and you’ll be fine.
Do you have any tips for cleaning the mineral deposits in the toilet tank? Even when I turn off the water valve to toilet and flush, the tanks doesn’t completely empty. Still has about 2″ of water in there. Not just staining on the tank walls but have particles of minerals that have settled on the bottom and of course when stirred-up end up in the bowl and leave a mineral ring. Thoughts?
What if you have a old toliet with a lot of stains in and out and you have a child that miss when does number1 pee and it goes in the floor and after you. Clean it up there s a lingering order that you dnt get ride of I move to my apt about 3 years ago and there was this smell they couldn’t get ride of and my child made it worse
This worked for me perfectly! Poured vinegar down three different times – first time I did it, I just poured maybe a pint in, let it sit for an hour, cleaned the bowl. It came back again, but to a much lesser degree. Next day poured some more down, let it sit for the hour again, nothing came back. Did it a 3rd time for good measure – all mold gone and the bowl has remained streakless. Thanks very much for this!
I’m getting tired of this black nonsense appearing every 4-5 days. I clean it and sure enough, it’s back. Going to try it tomorrow. Amazing what you can learn on YT. My heater went on the blink, I called an HVAC co. and they told me $9500 for a/c and heater replacement. Went on YT, did some research and found it was the electronic control board. $195, found install article on YT. 5 years later, running like a champ. Thanks Papa Joe.
I don’t know who this guy is or why this was suggested to me, but I’m not complaining. I don’t have any toilet problems, but I already know who to come back to when I do. The article was great from the start to the end. The guy showed up the problem, explained the problem, showed the steps, and showed the remedy. Then he had a problem; a problem no longer.
Thank you! Our apartment was recently outfitted with this kind of toilet. I have been cleaning that mold off with a Magic Eraser and a sturdy pair of rubber gloves. Now that you have shown a more effective way to tackle this, I make this part of my cleaning routing. Trust me, the mold issue is really a problem in South Florida.
I got a Toto turbo flush toilet, and realize quickly afterwards that it was the best damn toilet I ever had. It has no tiny, downspout holes and keeps itself relatively clean, has two angled turbo flow holes that point the water sideways to propagate a better swirl. It’s absolutely the perfect, and I rarely have to clean it.
One reason this happens is because there are mineral deposits on the bowl. Gunk sticks to these deposits and mold grows on the gunk. Vinegar can help clean mineral deposits… but often will not get them all…. Especially with heavy deposits, What works is a pumice stick. Use this to grind away the deposits . Interestingly… pumice stone is harder than the deposits, but softer than the toilet. Gets out toilet rings too
Vinegar is great for so many things. Even letting it sit in the toilet over night for nasties that are stubborn too. Push as much water out of the toilet as you can w a plunger and fill it with a gallon. I think too doing a daily tank and bowl soak would help keep up on the mold, you don’t need the whole gallon just 1/4 cup split between the two, no scrubbing until when it’s obvious
Originally from Long Island NY, 22 yrs living in Florida now has been a constant battle with mold. It took me at least 6 months researching, to finally find out that mold grows roots into wood and natural organic things. I kept cleaning and it kept coming back. I washed my walls and everything with bleach. Sprayed my air conditioner with bleach, nothing worked, it just grew back. Finally I learned about the growing roots and finally that vinegar kills mold. I also have a uvc light bulb and a dehumidifier now. I have this exact problem with my toilet also ! I’ve been in this same apartment for 19 years now and had the whole back of the toilet tank black with mold 3 times. I’ve scrubbed it out 3 times, last time with oxiclean. I was thinking about the vinegar but didn’t know how to remedy the rim. Finally I asked a plumber and he said “pour whatever in the overflow pipe.” I haven’t done it yet, but I’m so happy to see confirmation that this is what to do ! Even the comments answered my questions about vinegar won’t rot the toilet parts because vinegar comes in plastic. I did find “Cleaning Vinegar” at Walmart for 2.39 a half gallon so I’ve bought a few to use for this. (It warns don’t breathe the fumes, it’s not edible vinegar). Sheesh ! You need an education about mold, it’s been so difficult to find out this information… Blessings all ! Thank you so much for this article!
I live in a hot area and the water in the tank gets warm and really smells. I tried everything, once I figured out where that terrible smell was coming from. So far the only thing I found to really clean it is Oxiclean washing machine cleaner with odor blasters. It says use it in hot water so I put half packet in a mason jar with hot water and dissolve it first.
Thanks for this information. I started noticing this under the toilt rim not after my toilet was replaced with a new. Despite cleaning and cleaners I couldn’t get rid of it. Unsightly mess. I going to give this a try next week. 😊 If youtube would put more useful info on instead of garbage shorts and ridiculous nonsense it would be like it used to be. 2:02
I did this, it works great for maintenance but getting all that black mold off needed a little more work, so I used a baking soda paste, which is just adding water to baking soda to the right consistency, and applied it all around the under side of the lip of the toilet, by hand using a rubber glove. Let that sit for a while then soaked an old scrubber sponge (I save all my old grungy kitchen scrubber sponges just for this type of job) with distilled vinegar and it came right off much quicker.
I love that you got to the point quickly and efficiently. I chose this article after starting another article that took almost 12 minutes to say the same thing. I don’t want to spend 12 minutes on something that can be explained in 2 minutes (especially when the other 10 minutes is spent advertising their articles by telling me to like the article and subscribe, etc. as if I need to be told to do this on websites I like). Needless to say, I closed the other article and came here. 😊 I do want to suggest that it would be better to clean the toilet as much as possible before adding the vinegar. It may reduce the number of times you have to repeat the vinegar procedure.
Great article! I’ve had this problem for years in my bathroom toilet. I thought the black steaks were caused by the water itself, and I was also drinking the same water from my kitchen tap. So, years ago, I added a Pur water filter on the kitchen tap and also bought bottled water, because I was concerned about what I might be ingesting. I will be trying this solution tomorrow. I had no idea that it was mold inside the toilet. Amazing what comes up in your You Tube feed at 3:00 in the morning. I’ll update with my results in a day or so. Thanks Papa Joe!
I would like to thank you. Up until last month, I had this type of toilet for nearly a decade. Three weeks ago, I had it replaced for a different kind after the stains had finally broken me. Now that I’ve seen this article, I’m going to lie awake thinking about the four hundred dollars I could have saved.
From your Publix bleach, I’m guessing you might live in Florida like I do. Mold is such a constant issue in the southeastern U.S. I feel like I’m always fighting it, whether it’s in my toilets or more so outside on fences, walls, and other structures. Vinegar helps a lot, as well as bleach. A good thing to invest in for outside though is a pressure washer. Or for inside a steam cleaner. And for indoor spaces that build up moisture, a dehumidifier or quick fix items like Damp Rid. But mold and mildew are just things you have to deal with in certain regions.
I literally just got done scrubbing the mildew from my toilet bowl yesterday. I had never noticed it before, because you can’t see it from within the bathroom, only from a distance when walking by. It’s so high up under the rim, that you have to be at a distance and crouching down slightly to notice it. I left the bathroom door open (I usually don’t), and I noticed it while walking to the kitchen. I was horrified. What a coincidence that this article should show up in my recommendations when I didn’t even google anything about it. Sometimes I think my google home listens to my conversations. 😏
This happens on most of my faucets and toilets in my new house. I thought it was the water, but it doesn’t happen on my new faucets in my recently remodeled bathroom and kitchen. I think the previous owners let the lack of cleaning get so bad that there’s mold internally that doesn’t get killed when I clean it, so it comes back quickly. I’ve never had this problem in past homes. I’m thinking of taking the faucets off, removing the aerators, and using a wire pipe cleaner on them.
I agree vinegar is needed but there’s a good chance the toilet seal is leaking… or it was leaking. Most toilets have a flapper but this design is different. There’s an flat seal at the bottom of the black plastic which might need to be replaced. Also it appears the water level level is too high… not sure. If it was too high it would be spilling over into the bowl, causing constant wetness and mold. After the maintenance issues are fixed, vinegar can be used.
To make it even more effective, first drain and clean the toilet bowl and tank with Dawn dish detergent then dry and put duct tape around the jet inner circle. Pour vinegar into the hole in the rear tank. Let it set for a few hours then remove the duct tape and refill the rear tank with water. This longer method kills the mold and removes the white calcium scale.
to keep your toilet forever clean, put vinegar in a spray bottle and skirt once on the lid then keep lid closed. Do his anytime you use it and every night. The vinegar is an evaporating acid and destroys the negative energy flowing up into your toilet from the sewer. A ring I could not get rid of with acid disappearred after a few days of doing rhis and has never returned. also keep drains closed and spray a little at them.
Living in Florida, I find this to be a common problem. Even my sink faucets have this problem and my shower. So, I clean the black mold periodically from the jets. But this is a simple fix that I didn’t realize started from the inside. Thanks for the knowledge. I will handle it now and be rid of the toilet mold!
Thanks for the article. I recently purchased an device on Amazon made by Fluidmaster that uses a bleach pellet cartridge. Each time you flush water flows through the bleach pellets and then into the overflow tube and circulates through the holes like you show. The bleach never gets into the tank, which can detroy the plumbing parts. Very good system, but you do need to replace the bleach pellet cartridge. Replacement is based on usage. I have one main toilet that needs a new cartridge about every 60 days. Another I have lasts about 120 days. Just an option.
The only time I ever had this was when I lived with my diabetic Ex. It even showed up in our vacation home toilet! Never had it before him or in the 5 years since being on my own. A friend told me she was battling a moldy toilet and her husband is diabetic 🤷🏼♀️ I would suggest checking the sugar levels of your urine.
Same problem, and I spent a couple years experimenting (was driving me crazy). What the gentleman doesn’t say is the vinegar will get rid of harness build up that is food for the mold. Some molds will not be killed by vinegar alone, like the orange mold I had. In that case I used a bottle (500ml) of 3% Hydrogen Peroxide ( the first aid stuff) pouring it the same place and it killed the mold.
When I bought my 1970’s house in 1984, it still had the original toilets and there was never a problem. In 1989 we remodeled the bathroom and out in the Kohler $400 throne sized toilet. Ten years later the mold problem began under the rim like you show. Hey vinegar is cheap. I will get back here and let you know how it turned out. One gallon should take care of up stairs and down stairs toilets. Wish me luck with the muck.
Oh man, when I bought my house the toilet had this issue. I tried vinegar, bleach, everything. I think it had been sitting like that for months. I finally got a new one. I offered the moldy one to anyone that may need it and i felt bad that i didnt think they’d be able to fix it but they were just thrilled to get a toilet. I hope they got it fixed!
I wonder if the 30% acid vinegar would work any better / faster. I always have that around the house for killing weeds and removing rust. You have to be a little careful with it because it’s rather caustic, but it’s amazingly effective for those tasks. You can get it at Home Depot, Lowes, etc. So you won’t pass out from sticker shock, I’ll warn you right up front that it’s expensive – about 20 bucks a gallon. But a little goes a long way.
There is a reason the cleaning products have a nozzle & a slanted shape.. You’re supposed to push at least half a bottle into the crevasse up top all around, let it fall down covering everything, close the lid & 30 min later just press the flush button. Still, good to know that the main issue might be present in the water tank. Great article.
Good advice, and there’s a number of things around the house that work well, hydrogen peroxide being one that REALLY works well! Also, it ABSOLUTELY helps to completely drain the water tank and, again, use HP to scrub down the inside of the tank. HP also instantly dissolves calcium, lime, and hard water deposits that form rings in the toilet bowl. That’s a CONSTANT battle I have because maybe I’m OCD, but I can’t stand that ring, it builds up, traps germs, and makes your bathroom STINK! I moved to where I am now about a year ago, and my toilet is WAY cleaner now than it was when I moved in!
For 10 years, I had this problem weekly in the toilet of the apartment in which I reside. For 10 years, the landlord would say, “Well, that’s normal.” I find your article one month ago and invest in a giant bottle of vinegar. One month later with no return of mold, I’m rubbing my hands waiting to run into my landlord again so I can proudly say, “That was NOT normal and you knew that!” Thank you so much for this article that went straight to the point of a great solution. Come on, landlord. I’m waiting for you.
This article along with the pumice stone article is so helpful. Thank you! I have used bleach for years but it has not been as effective as I’d like. Doesn’t bleach and vinegar used together create a toxic fume meaning I would need to eliminate the bleach and use vinegar on its own for the bowl maintenance?
I use cistern blocks for the same reason, that way every time I flush the toilet, a powerful cleaning is taking place inside the toilet, as well the bowl Another place to check for mould is in the cistern itself, because if there is mould in there, you are just reintroducing mould spores in to the cavity where water comes to flush the toilet A good idea, is to turn the water off to the toilet if you have an isolation valve, or to the house itself if you don’t, then take the cistern cover off, flush the toilet and use the same toilet cleaner you use for the bowl inside the cistern around the inner wall of the cistern Coat the inner wall, let it sit for about an hour, this will kill off bacteria and mould, then turn the water back on and let the cistern refill, then flush the toilet to flush out the bleach from the cistern Then I recommend using a cistern block, they typically last about 50 flushes, so how long you get between uses varies depending on usage for a household, you may find that mould, dirt and grime comes out of the water jets with use of a cistern block, this is normal, it means that inside of the cavity is being cleaned out of any build up that has occurred over time Continued use of a cistern block, will prevent the issue from reoccurring, both in the cistern and in the cavity where the water comes to flush the bowl Hope that helps
That’s mine now. The only thing that gets ride of it for a few days is tiles with Clorox. It also smells so strange. It’s the only toilet out of the entire house with this issue. Also has a crazy funky smell constantly! I’ve done a whole just of vinegar I. February but not in the section you mention cause it did t help worth square. Still molded and stank At this point I hate the toilet anyway so I plan to get a new one. I even tried an iron out tablet and that now is growing some fuzzy white stuff in the tank. Don’t know what’s happening
I poured half a jug of distilled vinegar into the cylinder and I didn’t see any of the distilled vinegar pour out of the jets and into the bowl. Where did the distilled vinegar go? Wasn’t the distilled vinegar supposed to come out of the jets since thats where the mold that’s creating those stains living?
This usually happens when you put the bleach discs in the tank. The chemicals in those tablets eat away at the smooth porcelain causing imperfections in the otherwise smooth finish. once those imperfections start the mold will always come back. Mold wont otherwise grow on porcelain. DONT USE THOSE TABLETS. It’s also usually seen at the water level in the bowl. Most any cleaner will clean this problem with enough scrubbing but none will remove it permanently.
So I have a toilet that doesn’t see much use, I came back to check on it, and the water level in the bowl had receded quite substantially. I also have one of those things that clips onto the toilet and releases blue detergent or whatever. And it looked like the porcelain had sorta eroded, but I can’t be sure and didn’t have the time to clean it and see. So I was wondering if those products can damage the enamel/porcelain if it becomes too concentrated and left to sit?
I recently started having this in my toilet bowl. I put 1 cup of citric acid in the tank. Waited 1-2 hours and refilled bowl. Then, I used Lysol liquid toilet bowl cleaner that you squirt under the rim. The mold was loose and came off without having to scrub. Now it’s clean and I will put vinegar in the middle section to kill any residual mold. Thanks for the information. I really appreciate good cleaning tips.
My son was visiting and was actually the one who noticed the mold. We had no idea what it was because I pride myself on keeping my stool clean. I searched YouTube and found this article. My son went to get the vinegar and came back with not, distilled vinegar but, cleaning vinegar. I wasn’t happy about that but I tried it anyway. I wasn’t expecting it to work. I left it over night and checked the stool, it was sparkling. No mold at all and I didn’t have to scrub one bit. So that’s a tip for others. Thank you so much for this information. Now I will regularly maintain my stool with vinegar. Great article. Direct and to the point. Good job!
Thank you so much! I’ve never seen a tpilet do this in my whole life until both our toilets started doing it this year. It’s been so frustrating to try to clean. I’ve bought 4 different toilet brushes, 4 different toilet bowl cleaning chemicals. Nothing got it completely clean. And so much back pain scrubbing the toilets. I had almost given up, but too embarrassed to have a plumber come over to look at them. It’s disgusting. I will definitely the vinegar tomorrow.
My previous toilet used to do this. Clean it and the stuff would come back. Chlorine tablets in the tank didn’t help. Fast forward to today. The toilet was replaced by my landlord. Now no streaks at all. Haven’t had to add chlorine tabs or anything. Just cleans itself. The Hispanic guy Gustavo who replaced the toilet said the total cost including labor was under $300.