Baseboards are installed for aesthetic reasons, hiding the joint where walls meet the floor and protecting plaster walls from getting kicked. They also serve a necessary function in adding elegance and personality to any room. Crown molding, baseboards, and wainscoting can be installed to conceal cracks or improve taping jobs, or purely for aesthetics.
When installing crown molding on cabinets, it is important to consider the specific cabinet scenario and determine which technique best fits your cabinets. For wonky walls, it is best to use molding made of a composite material like polystyrene.
Installing wood moldings increases the value of your home or business. It is recommended to prime and paint before installing, placing the boards horizontally on sawhorses and painting while standing up. It is always a good idea to paint your ceiling, walls, and crown molding before installing it to avoid trying to paint around the various areas.
A customer asked if they could install crown molding and baseboards in the bottom story of their house along with the painting. The style you choose should be based on your preferences, whether it’s contemporary or traditional. Moulding is not a requirement, but it is essential to consider the style you want.
Hardwood and tile should be installed first, followed by trim, and carpet last. Once the carpet is installed on the tack strips, the trim can sandwich it so that it doesn’t get pushed. Overall, installing crown molding, baseboards, and wainscoting can enhance the overall appearance of your space.
📹 How to install baseboard for beginners
Baseboard seems more intimidating than it is. I’ll go over a bunch of detail about the boards, types, sizes, as well as where and …
How long should trim acclimate before installing?
Although there is a general consensus that a timeframe of 48 to 72 hours is appropriate for acclimation, it is essential to conduct a personal measurement of the moisture content of the material to guarantee precision. This is the rationale behind the recommendation to invest in a pinless moisture meter.
Do I install carpet or baseboard first?
Baseboards are typically installed before carpet, requiring careful measurements of thickness and height gap. While they can be installed after carpet, it is a cleaner and faster process to avoid paint, stain, or caulking. Additional resources on carpet installation include questions about difficulty, padding requirements, finding local carpet installers, and whether carpet can be installed over tile.
What is the correct order of installation for a floor frame?
This article outlines the process of building a floor for a house on a concrete foundation, including basements and crawl spaces. The process involves square the sill plate layout, cut, drill, and attach the sill plates, build basement bearing walls, lay out joist spacing, attach the rim joists, and cut and install floor joists between the rim joists. The joist spans and spacing are determined by manufacturer engineering, and every floor joist manufacturer has product literature available.
Should you install baseboards before or after painting walls?
When painting a room, it is best to paint the trim first, then the ceilings, and then the walls. This is because it is easier and faster to tape off the trim than to tape off the walls, and it doesn’t involve the hassle of taping them both. This system ensures a smooth finish on the trim and allows it to dry for 24 hours before moving onto the ceiling. If you live in the Sacramento area and need help painting your house, you can get a free painting estimate by clicking the button below.
Before starting any painting project, gather all the necessary supplies to make the job run smoother and save time. A list of items to compile before starting painting includes:
- Painter’s tape
- Painter’s tape
- Painter’s tape
- Painter’s tape
- Painter’s tape
- Painter’s tape
- Painter’s tape
- Painter’s tape
- Painter’s tape
If you need help painting your Sacramento area, click the button below to get a free painting estimate.
How long to let baseboard dry before installing?
The following tutorial presents a straightforward approach to installing new baseboards, eschewing the intricacies of coping and emphasizing the attainment of professional-grade results in a time-efficient manner. The tutorial underscores the significance of allowing baseboards to dry overnight following painting and the avoidance of superfluous, time-consuming procedures.
Do carpet installers take off baseboards?
Baseboards do not need to be removed to install carpet, and many carpet installers leave them on during the installation process. If you decide to install carpet after baseboards, ensure there is a gap to allow the installer to neatly tuck the new carpet underneath the baseboards. To avoid damage, be patient with the tack strips and shield the baseboard with painters tape. It is important to be cautious and avoid nicks on the baseboard with the tack strips.
Should I paint the walls or trim first?
The decision to paint the wall or trim first depends on personal preferences and the desired outcome. Professional painters typically start with the trim, then the ceiling, and finally the walls. The choice should be based on personal satisfaction and the ease of painting. Trim is typically painted in a light and neutral color, making it easier to cover up splatters and avoid tapping the trim. Walls are typically painted with a flat or satin finish, while trim is painted with a semi or high gloss, making it easier to cover splatters. If painting the ceiling, always paint it first. There is no right answer to this question, but it is generally a personal choice.
Do you install trim before or after flooring?
Baseboards are typically installed before flooring, such as carpeting, to prevent tucking and exposing edges. However, hardwood and laminate flooring can be installed first before trim. A gap of at least 1 inch is necessary between the baseboard and floor, as part of the building code and for practical reasons. This gap reduces moisture seepage into drywall, which can cause mold growth and compromise the structure’s integrity. It also allows for wallboard expansion over time.
In carpeting, installing baseboards first provides a cleaner appearance, as carpeting edges can be tucked under the baseboard. This also eliminates the risk of paint drops or stain seeping through the carpet. Overall, baseboards and flooring should be installed first for optimal functionality and aesthetic appeal.
Do you install baseboards before or after vanity?
Water-resistant baseboards are a wise choice for traditional vanities that sit flush with the floor, as they help prevent moisture damage from seeping into gaps between the vanity and the wall or floor. These baseboards, made from materials like PVC, MDF, or treated wood like teak, seal off these gaps and protect walls and floors from water damage. Floating bathroom base cabinets, which are wall-mounted and elevated above the floor, typically do not require a baseboard due to their clean, minimalist design.
However, for traditional vanities, baseboards not only protect against water but also contribute to a polished look, creating a seamless transition between the vanity, wall, and floor. The choice depends on the vanity style and personal design preferences.
Should baseboard be installed before hardwood?
The installation of baseboards should commence with the removal of existing materials and the formation of scarf joints, which will facilitate a seamless visual outcome. It is recommended that the hardwood flooring be installed first to prevent gaps and water damage. Once this has been completed, the baseboards should be fitted with precision to achieve a snug fit and allow for the application of stain.
📹 You’re a “HACK” if you use 1/4 ROUND TRIM or SHOE MOLDING…Right?
Hey Gang! In our flooring video, we got a lot comments regarding the baseboard and how we’re going to tackle the transition …
I am new to your website and you are right. I am in Louisiana also and have been on construction jobs since I was 7 years old with my dad I am now 58 years old and you can always tell the DIY-ers and the newbie contractors are the contractors that think there way is the only way. We where working on over 400 homes a year and commercial buildings. Number 1 for everyone out there the flooring is the last thing that should be installed on your project then the base shoe or 1/4 round then the last person in the house should be a painter to touch up the shoe or 1/4 round this will prevent any one messing up the flooring material with nail guns there shoes with rocks others trades Plumbers, Electrican and so on. Everything should be 100% finished if possible. There is a sequence to construction and if your going to be in this business you need to figure this out quick. Stop running subs on top of each other and get better at scheduling your jobs. An extra day are two can make all the difference in how your job looks. And believe me a camera can hide a lot of defects with the shows you see on tv. Thanks again love to see more great work from your website.
Any kind of round is, IMO, really boring. A couple of years ago, I was redoing the floor in my kitchen and ripped out the old molding. I went to the box store and looked for replacement molding and they were out of stock. I looked around and found molding that had a squared off top, sort of like regular lumber, so decided to try that for a different look. I don’t think I’ll every go back to rounded off molding. The look is ultra clean and modern looking!
I explain the difference in choosing either ‘stained’/floor matching qtr rnd white qtr rnd., is that; if you have white baseboards and use floor colored qtr rnd. it looks like the floor is climbing the wall. But, if you use white qtr rnd it looks like the wall is meeting the floor. Now if you have stained wood baseboards then either will work because they are both stained and it becomes less noticable of a difference
I have a question: Say the homeowner was not ok with caulking the gap in the bathroom and was dead set on using quarter round and didnt care that there would still be a noticeable gap. Would you try to persuade the homeowner to go with the caulking or just go ahead and install the quarter round? The point of the question is should a contractor be more concerned with making the homeowner happy or should you be more concerned with reputation…. like the homeowner has visitors, they see the gap between the tile and quarter round and believe that the contractor did shoddy work. So, do you strive for 100% homeowner happiness or do you put your work and reputation first?
I’m on the no-sing side myself but will to give in on some situations such as glue down prefinish or sand and finish Hardwood on concrete or uneven subfloors. Couple of the situation you had their I fully agree but I will usually jobs with the baseboard or offer to put it in free after I’m done with the floor heck it’s about the same thing as quarter round I’m so stubborn I’ve done hundreds of jobs where I’ve cut the baseboard with a jamb saw and a multi-tool I love the challenge of trying to get a wood floor tight with nothing to I against when you get that last piece I had the privilege to help build my grandpa’s house and I wanted to do top-notch for the critical family watch I let him talk me into a prefinish it was his house it’s so I was there laying out the plan do you install the cabinet guy showed up same guys that walked across my first tile floor ever 15 years earlier which item everything I did on that house which was pretty much everything even cut the logs the result of the tile with probably the only thing I could have been proud of now that I know what I know about building it look great until they walked on it back to Gramps it was almost a bloody war they’ve told me you can’t put cabinets on top of a wood floor I even offered to sign a waiver and take full responsibility my grandpa is always hated tension so I gave in for him but I still pull the no no I put my flooring so tight to that cabinet it look like it went under it because I couldn’t stand to put quarter round on brand new hickory cabinets in brand new house.
I have a 140 year old house that I need to install new baseboards on because the demo guys from the remodel tore out the 140 year old baseboard. I have to fabricate the 8″ baseboard, put an Ogee like profile on the top and stain it to match the existing 140 year old wood door trim. The floor is not level, the walls are not perfectly plumb and the existing trim around the doors is not square to each other. So the baseboards going between the door trim are going to be really wonky unless I can figure it out. So much so, I don’t even know where to start. I believe now I am going to have to install quarter round or shoe to cover the gap due to the not level floor. This is a mess and I’m not even sure where to start. I need a article “how to” on how to go about this…UGH!!!
I have quarter round all along the edges on my house. When I first bought it 3 months ago I pulled a piece of quarter round out to see what the reasoning is and sure enough it’s to cover gaps of harwood flooring along the walls. For whatever reason when they installed the flooring they didn’t remove the baseboards and used quarter round to cover the gaps. Me personally I would have removed the base boards before installing the flooring.
Installing baseboards first when you had the choice…hurts a little. I know you wanted to fill the time, but there had to have been another project you could have done first. To me, 1/4 round points out that the installer is covering something up. In these old NE homes where the floors undalates like the ocean, installing round is better than not installing round. …but it should all be on top of the baseboards.