What Measurements Do Microwaves Have Inside?

Standard over-the-range microwave dimensions range from 0.8 cubic feet for compact models up to 2.1 cubic feet for full-sized models. The internal dimensions, or capacity, indicate how much cooking space is available inside the microwave. The depth of the appliance may be the most important factor depending on space constraints in your kitchen. A microwave has an interior chamber that is 10 inches wide, 12 inches long, and 8 inches high. To calculate the volume of the microwave’s interior chamber, multiply these dimensions.

Microwaves are measured by exterior width, height, depth, and interior capacity. The interior capacity, measured in cubic feet (cu. ft.), is sometimes listed in the product name. Exterior sizes vary by microwave. Most internal microwave dimensions range from 0.5 cubic feet to a little over 2 cubic feet.

Interior dimensions can range from 1.0 to over 2.0 cubic feet, with most landing between 1.2 to 1.6 cubic feet. Widths align with standard cabinet widths, usually 24″, 27″, or 30″. Depths range from roughly 20″ to 25″ with the door closed and 30″ to 35″ with the door open.

Over-the-range microwaves are roughly 30″ wide, 17″ high, and 15″ to 17″ deep with a closed door. Built-in microwaves typically match standard cabinet dimensions.

Compact microwaves are usually between 17 to 20 inches wide. Height ranges from 10 to 12 inches. Depth ranges from 10 to 45cm. A built-in microwave has a standard niche height of 38 or 45cm. Standard over-the-range microwaves have dimensions of 30 inches in width, a height from top to bottom of 17 inches, and a depth of 15 to 18 inches. Available in a variety of sizes, most over-the-range microwaves measure 1.6 cu. ft. or larger, which means you can usually fit a 15″ casserole baking dish. Some configurations, like small countertop microwaves, require as little as 10-11 inches of height, 15-18 inches of width, and 12-16 inches of depth. Larger models may require more space for the microwave’s internal dimensions.


📹 Built-In Standard Microwaves Measurement Guide | ao.com

Watch this short video to see how simple measuring up for a brand new built-in standard microwave can be. We’ll show you all the …


How big is the inside of a microwave?

Microwaves have interior space ranging from 0. 8 cubic feet for compact models to 2. 1 cubic feet for full-sized models. Low profile models offer just over 1 cubic foot of space. Widths are 30 inches, matching the range and cabinet width. Compact over-the-range microwaves are 24 inches wide and 17 inches high. Low profile microwaves are slightly over 10 inches high for shorter cutouts, providing more room above the range.

How do you fit a microwave to a cabinet?
(Image Source: Pixabay.com)

How do you fit a microwave to a cabinet?

To integrate a new microwave into your kitchen, follow these steps:

  1. Remove cabinet doors as needed.
  2. Drill a hole for the electrical outlet.
  3. Install the bracket supporting the microwave.
  4. Set the microwave in place on the bracket.
  5. Remove cabinet doors and cut out the bottom of the cabinet where the microwave will fit.\n6

Incorporating a new microwave into existing cabinetry can be a simple and cost-effective way to open up a kitchen. This article provides an overview of the options for integrating a new microwave, their advantages and disadvantages, and a simple “how to” guide for setting it up over a range.

Prioritizing function over aesthetics is crucial when choosing a new microwave location. Consider factors like the number of cooks or the height of the microwave, and choose a location that is suitable for your needs.

How much space do you need for a built-in microwave?

To install a microwave, measure the cabinet opening, which should be 28 ½ inches wide, 17 ⅝ inches high, and 21 ⅞ inches deep. Confirm the electrical supply with 240V at 60Hz and a dedicated circuit. Assemble and install the spacer kit, aligning a spacer bar on the bottom trim and securing it with 3/8 inch washer screws. Center the spacer assembly against the lower front edge of the cabinet opening, drill through the mounting holes to create pilot holes, and use a Phillips head screwdriver to thread and tighten the 4 ¾ inch flathead screws from the microwave installation kit. Avoid overtightening the screws.

What are the measurements of a built-in microwave?

Built-in microwaves have a capacity of 1. 0 to 2. 2 cubic feet, with most settling between 1. 2 to 1. 6 cubic feet. They can be installed in a cabinet or under a counter, and their widths align with standard cabinet widths. The height ranges from 17 to 22 inches, and their depths range from 20 to 25 inches with the door closed and 30 to 35 inches with the door open. For more information, explore the built-in microwave buying guide.

Will a microwave fit in a wall cabinet?

Wall cabinets are a unique and efficient way to store your microwave oven, especially in small kitchens with limited countertop space. They provide easy access and additional storage underneath, making the appliance within easy reach without contributing to countertop clutter. This design is particularly beneficial for smaller microwave ovens and busy kitchens where space efficiency is crucial.

How to measure built-in microwave for replacement?
(Image Source: Pixabay.com)

How to measure built-in microwave for replacement?

What is the standard space for a microwave?

The typical dimensions of a microwave oven are 50 cm in width, 30 cm in height, and 40 cm in depth. Additionally, a 10 cm ventilation space and a 20 cm vent height are standard. It is of the utmost importance to ascertain that the interior dimensions of the microwave are sufficient to accommodate dishes that are suitable for use in such an appliance. In kitchen renovations and new builds, built-in microwaves and trim kits are a popular choice as they integrate all appliances on one wall.

Can you put a countertop microwave in a cabinet?
(Image Source: Pixabay.com)

Can you put a countertop microwave in a cabinet?

Countertop Microwaves are available in various models, but only select models can be installed in a cabinet for a built-in look. To convert a Countertop Microwave for a built-in application, an optional built-in trim kit must be available for the specific model. These kits consist of a trim frame, upper, lower, and rear ducts that attach to and encase the Microwave inside the cabinet cut-out. It is crucial to use the trim kit designed for the specific Microwave model to ensure proper air flow.

All Countertop Microwaves have intake and output air vents to prevent overheating. Installing the Microwave in an enclosed space without a built-in trim kit can prevent proper airflow from the air vents, leading to overheating during cooking and potentially causing internal components to malfunction, requiring repair or replacement.

Can you put a countertop microwave in a built-in space?
(Image Source: Pixabay.com)

Can you put a countertop microwave in a built-in space?

Countertop microwaves have intake and output air vents to prevent overheating, but installing them in an enclosed space without a built-in trim kit can lead to overheating and malfunctioning internal components. The 27″ and 30″ trim kits are listed in product specifications, with the trim frame being the only difference. If the microwave is installed over a 27″ or 30″ wall oven, match the trim kit width to the wall oven.

The overall height of a microwave includes the feet, but only the face/front of the microwave (excluding the feet) will be visible through the opening of the trim kit frame. The opening of the frame is slightly shorter in height than the overall height of the microwave.

How much air space do you need around a microwave?
(Image Source: Pixabay.com)

How much air space do you need around a microwave?

To ensure proper performance of a microwave, it is essential to provide adequate space for ventilation, with manufacturers recommending a minimum of 2-6 inches of space on the sides and rear for proper airflow and prevent overheating. The microwave should also have sufficient clearance above the door for full door opening and comfortable control access, with a range of 6-12 inches. A sturdy and level surface is recommended to prevent tipping or instability during use.

The microwave should be placed at a comfortable height for easy access to controls and to prevent strain when removing hot items. It is recommended to place the microwave near a grounded electrical outlet for convenient power access, and to ensure vents are not blocked by walls or other objects. Additionally, the microwave should be kept away from heat sources, such as stovetops or ovens, and not placed near flammable materials.

What size microwave fits in a cabinet?
(Image Source: Pixabay.com)

What size microwave fits in a cabinet?

The integrated microwave ovens are constructed in a manner that allows them to be mounted flush with the cabinetry, yet they lack the necessary ventilation capabilities. The interior space of these appliances ranges from 1. 0 to over 2. 0. The volume of the compartment is typically between 1. 2 and 1. 6 cubic feet. The widths of these appliances align with standard cabinet widths, with depths ranging from 20″ to 25″ when the door is closed and from 30″ to 35″ when the door is open.


📹 Microwave Oven | How does it work?

Microwave ovens have an interesting physics behind them. Let’s explore the complete physics behind the microwave ovens in this …


What Measurements Do Microwaves Have Inside?
(Image Source: Pixabay.com)

Rafaela Priori Gutler

Hi, I’m Rafaela Priori Gutler, a passionate interior designer and DIY enthusiast. I love transforming spaces into beautiful, functional havens through creative decor and practical advice. Whether it’s a small DIY project or a full home makeover, I’m here to share my tips, tricks, and inspiration to help you design the space of your dreams. Let’s make your home as unique as you are!

Email: [email protected], [email protected]

About me

1 comment

Your email address will not be published. Required fields are marked *

  • Wrong – my current microwave appears to be 600mm wide, when I ease it out, inside the cupboard there is more strengthening board just behind it making the space for the microwave 566mm only. Why cannot kitchen designers and microwave manufacturers not get together to produce standard products ? I don’t want to buy a microwave with a measuring tape

Pin It on Pinterest

We use cookies in order to give you the best possible experience on our website. By continuing to use this site, you agree to our use of cookies.
Accept
Privacy Policy