How To Take Off The Interior Fiesta Trim Pieces?

This guide outlines the process of removing and replacing the tailgate panel or interior trim of the Ford Fiesta in simple and quick steps. First, open the rear door and unscrew the fixing screws of the plastic uprights on the upper part. Then, pry the sides of the panel to unhook and remove it. Gently pull the upper A-pillar trim panel toward the center of the vehicle to release the A-pillar trim panel retaining clips.

For the B-Pillar trim, position the front and rear weatherstrips aside. For the current Ford Fiesta model, disconnect the tether clips from the A-pillar trim panel and release the A-pillar trim panel clip from the tether clip. Note that the tether clips have two tabs and require rotating the tether clip line in two stages to align.

To remove the plastic interior door panels in a sixth generation Ford Fiesta sedan or hatchback for upgrading OEM speakers, follow these steps:

1. Remove the trim above the rear window.
2. Take the cover off carefully with a flat blade at each end.
3. Undo the screws and then pull the actual trim straight.
4. Gently pull the upper A-pillar trim panel toward the center of the vehicle to release the A-pillar trim panel retaining clips.
5. Purchase a set of interior panel and trim removal tool set on Ebay, but be aware that you cannot break the clips as they are clipped on once the screws are out.

In summary, this guide provides step-by-step instructions for removing and replacing the tailgate panel or interior trim of the Ford Fiesta. It is important to note that the author does not take responsibility for any damage caused to the vehicle if you choose to remove the trim or trim pieces.