To reinforce dining room chairs, start by assessing the condition of each chair. Next, remove the seat and reinforce loose joints. Replace or repair broken parts, strengthen the seat, and reattach it. Finishing touches include adding finishing touches like a metal L-bracket.
There are various ways to fix, renew, and repair wobbly chairs with loose or broken parts. For example, loose legs, rungs, and spindles can be fixed using metal L-brackets. Some level of experience with a cordless drill is preferable for this fix, but minor handling is acceptable.
If your dining chairs need an upgrade, replace loose or broken parts by following these steps:
- Remove old glue from the chair.
- Remove screws.
- Sand and prepare the mating surfaces.
- Use slightly over-sized screws.
- Test fit the pieces and partially screw in the new screws.
- Glue and clamp the pieces.
- Set the chair aside for at least 24 hours.
To repair a chair, remove old glue, remove screws, sand and prepare the mating surfaces. Use slightly over-sized screws, test fit the pieces, partially screw in the new screws, glue and clamp the pieces, and set it aside for at least 24 hours.
The best solution is to disassemble the chair, scrape off old glue, re-glue the joints, and then re-assemble the chair. Clean the area around the split with a damp cloth, apply wood glue to the crack, and use clamps to hold the parts together. Wood adhesives work best when applied to both sides of a joint and used pressure to force the parts together.
📹 Repair those loose dining chairs yourself and save money. Do you know what to do?
Upholstery Kit Link: https://docs.google.com/document/d/1D4plALMEKfdkICNySNjHguu_ffrZ5lfnsOd6qjwmHu4/edit?usp=sharing …
📹 How to Repair Loose Dining Room Chair Legs
I found this article incredibly helpful, this is the exact repair I need to make on my chairs. My table is wobbly as well, can I do the same thing on my table as here? I’d love to see a article on tightening a table. The screws are tight but the table wobbles everywhere despite that. It’s a 40’s dining set that is 5 legged and the legs fit inside a frame and attach to cross blocks similar to what is on the chair. Thanks!!!
Good article. I found two nice old ornate french style chairs that somebody chucked away both need repair the legs are very loose front and back so I’ll be doing the same technique as what you have done in the article also I’m going to strip off all the old varnish before I work on them. I’ll be painting them in aged antique gold after I’ve repaired them.
i got a chair with lumbar support a while after hurting my back. its helping a lot but the chair as a whole is wobbly. the legs are flimsy. they noticeably flex if i push it forward or back and there are also visible gaps on the underside between the legs and the seat if i move it side to side. I applied some wood glue in these gaps and let it cure, but the whole thing is still wobbly.
I would think that whenever gluing, you want to have a “raw surface”, that is a surface that hasn’t been stained so that the glue penetrates the wood properly. Okay so you’ve solved the wobble on the back legs but my problem is also on the front two legs. None of the “corners” are 90 degrees ( because the front width is probably 19″ and the back is prob. 14″, I guess unscrewing the “brackets” and partially separating the pieces and adding glue and reclamping is the order of the day but I wish someone could come up with some sort of metal piece that fits right in there, with the odd angles and holes for screws, especially for the front. With the strange angles and the large square top of each front leg. What I’m asking for is a metal brace (like a moist hanger) that encompasses both front and side AND the thick square top part of the front legs, all being held together by one bracket with multiple screw holes. People as you know are not careful with chairs, they lean back, tilt and balance on the back legs and the front legs get their own punishment.
We bought a table and six chairs When I turned the chair over and removed the dust cover. There was webbing and no screws in the triangle blocks or anywhere around the perimeter. Without damaging the chair, I looked for any sort of fasteners. None ? The webbing appears to be glued down to the frame.. I am very puzzled on how the seat cushion is fastened The seating is in good shape but badly stained ( white) so we are just trying to change the cover Help
Well that was a half arsed job, if you REALLY want to repair a wobbly chair you need to take it apart, clean all the mating surfaces, then make sure the ENTIRE contact surfaces are covered in glue. Trying to Inject with a syringe will only place glue on what can be seen, plus it will only add new glue to failed glue, NOT BARE WOOD. That chair might be much stronger than previously, but my bet would be that customer will be unhappy within a year, bad-mouth you for not doing it properly and tell his mates not to use you. Do it properly, get yourself a good reputation as a professional, not a diyer
I appreciate your article. I’m looking for a way to repair my dining chair which has a cloth seat and a separate cloth back. The back is held onto the metal frame with two screws, one on each side. Because these chairs are older, the screw will not tighten in the hole. Do you have any suggestions for how I might get the screw to tighten? Thanks you for any guidance you are able to give me.
Hi thank you very much this was the only helpful article I found on this topic!! I am wondering if all chairs are supposed to have 4 triangle blocks ? My dining chairs have 2 triangle blocks identical to yours but the other two have a different shape with a gap between them and the frame. Should I only attach where the triangle blocks are ? ( my seat cushion fell off completely 😬) Thank you any suggestion is appreciated ! 🙂
I liked your article really loved it and I want to know how to repair my chair. I am not a carpenter and I am from India from the city of Mumbai. Is there any email address where I can email you. Also in your article I saw that wireless red color thing through which you put screws immediately. Whats that stuff called?