Designing furniture is a complex process that involves determining the type of furniture you want to create, listing your goals and challenges, and taking inspiration from common objects. It’s essential to develop a concept and create models to create functional and custom pieces that you can be proud of.
When building furniture, it’s important to choose materials wisely, such as wood, metal, plastic, and upholstery, and sketch and plan your design considering both aesthetics and functionality. Prioritizing ergonomics and functionality for comfortable and unique furniture is crucial.
Designing your own furniture is the best way to get unique, statement pieces for your home. Modern furniture is defined by clean, simple, and straightforward shapes and lines, and is made using materials like wood, metal, plastic, and upholstery. Building a full-sized prototype is recommended to ensure a sturdy foundation.
There are several considerations to make “good” furniture design, including mathematical and practical aspects. One of the key factors is inspiration from nature, which can be achieved by finding and selecting great pieces of wood and placing them properly into your furniture.
To create a beautiful, unique, and functional furniture, look for existing furniture design ideas, make a rough sketch of the furniture, create technical drawings or woodworking plans, and obtain a qualification in furniture design. Understanding furniture to create your own signature style, being a master of materials, and choosing the best materials are also essential steps in furniture design.
In conclusion, designing furniture is a complex process that requires a combination of mathematical and practical elements. By following these steps, you can create a functional and beautiful piece of furniture that will bring you joy and satisfaction.
📹 Designing a furniture collection – The thought process, materiality and manufacturing of the NAVE
Sharing our studio’s approach to designing a unique furniture collection. Highlighting the value of material research and its …
What are the four rules in furniture arrangement?
To arrange furniture effectively, start with a focal point, consider the space’s flow, use the 2/3 rule when choosing furniture, and create balance with furniture pieces. Pushing furniture against walls can make a space appear smaller and create negative space in larger rooms. If the room is too small to float furniture, place couches and tables where it makes sense. If there is enough room, don’t push furniture against the walls to avoid negative space. Start with the largest piece of furniture and work your way up, as this will help visualize the finished layout of the space.
How to design step by step?
The design process involves identifying the problem, researching it, brainstorming possible solutions, evaluating and selecting a promising one, creating a prototype, testing and troubleshooting, and making improvements to the final product. If it was easy, no company would ever stay in business, but instead, an ever-growing graveyard of bad ideas is a significant part of the modern marketplace.
What are the steps in designing furniture?
The furniture design process involves several steps, including research and conceptualizing, making a model and prototype, testing and presenting, and experimenting with materials. The process begins with initial research, often involving classic and contemporary pieces. The specifics of research depend on the designer’s aesthetic goals or client’s needs.
The next step is to conceptualize the furniture piece, considering its appearance, comfort, cost, and intended context. For example, a chair for an outdoor space might be made of hard, smooth materials like metal, wood, or plastic lumber. This process requires careful consideration, trial, and error to create practical and visually pleasing furniture. The furniture design process is a crucial aspect of a home’s design, and understanding these steps is essential for creating a functional and visually appealing piece.
What is a furniture layout plan?
Furniture plans are essential documents that outline the dimensions of a room or space, the layout of furniture items, the furniture schedule, clearances and traffic flow, scale and proportion, functionality, and aesthetic considerations. They are created by interior designers or space planners using design software or hand-drawn sketches. The plan outlines the location and orientation of each furniture item, including sofas, chairs, tables, beds, cabinets, and other furnishings.
The furniture schedule lists the quantity, categories, products, and product tags needed to identify, locate, and quote a furniture layout. Clearances and traffic flow are considered to ensure comfortable circulation and accessibility. The scale and proportion of furniture items are carefully considered to maintain the visual balance of the space. The furniture plan also takes into account the functional requirements of the space and the activities that will take place within it. The plan incorporates design elements such as balance, symmetry, and focal points to create a cohesive and visually appealing arrangement.
What are the 7 steps of design?
The designing process involves a series of steps that guide the creation of a product, such as an app, by understanding the customer’s needs and problems. This process involves defining the problem, researching and imagining, creating a prototype, selecting the right concept, implementing and testing, and receiving feedback from customers to improve the design. The digital revolution has led to a significant transformation in the marketplace, leading to the adoption of Design Thinking by many companies to survive and offer value to customers.
Design thinking is a method for generating fresh ideas and addressing issues applicable to any situation, and it is not limited to a single sector or field of expertise. The design process can be challenging, but it is essential for designers to face these challenges with a positive attitude and to reflect on each step to maintain focus. The design process is a crucial tool for Customer Experience Managers, as it allows them to understand the customer’s life and interactions with the company.
How do you plan a piece of furniture?
To create a successful furniture-planning process for your new LifeStyle home, follow these five tips:
Plan Your Space: Spend quality time in the rooms to understand their functions and identify areas that feel most like home. Note any important needs for each room to ensure the final furniture layout functions as you hoped.
Consider Sizing and Scale: Ensuring that your furniture pieces are the correct sizes is key. Start with blueprints and determine furniture arrangements from a dollhouse view. If you have built a LifeStyle plan, use online customization tools to view your floorplan and drag and drop furniture pieces into it. For custom homes, explore websites like Roomstyler. com to help you size furniture appropriately.
Define Your Style: Compile your favorite looks and styles by combining colors to see how they work together. Wall colors are a major consideration, so decide on the largest furniture items first since they make the largest impact. Use a color wheel to determine color matches and save pictures for easy reference.
Set a Budget: Estimate pricing for each piece you want to include in a space, including draperies, area rugs, art, lighting, household appliances, greenery, artwork, books, coasters, candles, and more. Take the time to list out every detail and estimate pricing by researching online.
Shop! Find furniture sources locally and online that fit your budget, considering the benefits of each, visiting stores and design districts, and asking friends for feedback. Keep your draft and collage book with you to find furniture that fits appropriately and matches your color scheme.
By following these simple steps, you will have a head start in ensuring a smooth and hassle-free furniture-planning process, giving you more time to enjoy the experience of creating a home that you love.
How do I get into furniture design?
A furniture designer career requires education in creative thinking, problem-solving, design development, modeling, materials, and manufacturing. A Diploma or Bachelor’s degree in furniture design, interior design, product design, industrial design, or architecture is typically required. The National Design Academy offers an online accredited short course in furniture design, providing an introduction to the field and enhancing specialized skills for interior designers and architects. An apprenticeship is a valuable next step, allowing designers to learn on the job while shadowing experienced professionals. Understanding furniture can help create a unique signature style.
How to make furniture step by step?
In order to design a project, one must first create an original plan or alternatively, one may purchase a pre-existing plan. It is then possible to proceed with the purchase of the necessary material and hardware, which may be either rough-sawn or pre-surfaced, and to make use of the tools available in the designated workshop. The next step is to cut the project parts, form the joinery, assemble the pieces, and apply the finish.
What do you call a person who designs furniture?
A furniture designer is a specialized industrial designer whose responsibilities include the planning, testing, and creation of furniture utilizing a variety of materials, including wood, metal, and other substances. Examples of their work include chairs, tables, bed frames, and sofas.
How to make a furniture layout?
To create a beautiful and functional furniture layout, map out the rooms, reach to the drawing board, arrange in a balanced way, consider traffic flow, highlight a focal point, and use lighting to your advantage. This is especially important for those who are not designers and want to create an open and attractive space. To achieve the best possible floor plan, consider the following ideas: map out the rooms, get to the drawing board, arrange in a balanced way, consider traffic flow, highlight a focal point, and use lighting to your advantage.
How do you present a furniture design?
To present your furniture portfolio to clients, choose the right format, organize your content, and include your personal experience. Design your layout and prepare your pitch. Practice your delivery and follow up with clients to ensure a successful presentation.
An open-minded approach is essential when presenting your portfolio. Show a general presentation that demonstrates your scope of work, then sit for discussion for realistic inputs and choices. Make the related presentation to be shared, as clients are more interested in a focused requirement analysis.
Before presenting your portfolio, practice your delivery and follow up with clients to ensure they are satisfied with the presentation. Remember that there is no one size fits all approach, so it’s important to tailor your presentation to suit your client’s needs and preferences.
📹 Building my Hardest Project Yet … for a Furniture Competition
In this video, I try and make one of the craziest things I’ve ever made, and see if it can win a furniture design competition.
Genuinely one of the most beautiful chairs I’ve seen. I could 100% see this on some fancy furniture site listed for 5 figures and the fact you made it while still learning, having done so much in this project for the first time makes it all the more impressive. I wish I could have the dedication to a project that you have, you seem like the kinda guy that could get anything done if given enough time.
Having watched the Youtube-woodworking scene for a long time, it’s crazy how these new guys just pop out of nowhere with great skills in both woodworking and article making. Great stuff dude, all around. Removing that much material power carving, the turbo plane disc is a dream. Definitely pricey for a student budget, but you should make subtle hints to the people in charge of the space how they’re missing out. 🙂 edit “the professor is banning hand carving” sad noises Hot melt glue is much better than superglue (as it’s way less brittle) when gluing on temporary clamping aid pieces. I use a spray bottle with isopropyl alcohol to get them off after they’ve served their purpose.
Tips for anybody sewing with fur: You don’t have to shave the seam allowance, you can sew it up like normal and then pull out the hairs from the seam by sticking something long and narrow under them (like a paintbrush or a knitting needle) and pulling them out of the crack. If the seam then has gaps, you can run the seam under the sewing machine once again. Kyle did a great job using a scalpel to cut the fabric on the wrong side! Using scissors will cut the furs and it makes a mess, and especially with hairs this long, it might ruin the fur by the seams. You can also use a box cutter, or if you don’t have those, you can use scissors and only keeping them close to the fabric, careful to not cut the fur pile. You did a wonderful job!
As an industrial design engineer, I must say that I haven’t made a project quite as complex as what you’ve done here. The woodworking projects we were assigned were not at all this challenging or expensive (more than 1000 dollar in materials alone?? damn!). You have a great future ahead of you if you keep this up. Good luck with your future projects!
As a suggestion, add two elastic straps to the underside of the seating cradle in an overlapping X cross between each opposite pillar to add some extra support for not only the user but also so the fabric doesn’t stretch or deform over time due to the constant intermittent weight, whilst also adding some extra comfort for feeling more structurally supported whilst sitting down. and at most it’ll just take a simple redesign of the metal brackets that hold the fabric in place on each corner. 🙂
For your dilemma at 10min. mark mallet & chisel work would be the traditional solution. Alternatively, you could use a stomp mortiser if your shop has one. Third option would be remove most of the waste with drill press or by hand with a forstner bit and fine tune with mallet & chisel. Lots of options to achieve this 🙂
Yeah, fluffy fabrics hide seams which is great, but that extra thickness causes problems when sewing it together and is largely avoided because of that. Thicker fabrics tend to have that problem as well but not as bad as the thick fluffy furs. Hand sewing might be better but it depends on the skill of the user who is hand sewing. There also may be far better things as Im a novice at sewing and dont know the best course of action but rather that there are materials that are far more difficult.
Your reflection on this project really hit home to me, as a fellow industrial designer and hobbyist woodworker I recognize a lot of what you say, thanks for putting it into words so well and for sharing this journey. Your chair is an absolute masterpiece and beautiful motivation to keep trying new things and push yourself! Gotta ask though, did you win the competition?
Their is nothing better then having an idea and working hard to make it. I did a CNC class back in 2019. After 3 months we had the first project where we could do what ever we wanted. I wanted to make a Chess set. I’ve never done anything with CNC before the class. Up to that point we have done manual Mills and Lathes. The best thing we had that I could make it on is the Prototrak Lathe. The teacher wanted us to show that we knew how to use it before he would let us program it and make stuff on it. So I looked up Chess design pieces. I then drew out what I wanted each piece to look like while keeping in mind the limits a lathe has. I then decided what messurment I wanted each section. I also kept in mind Chess regulation. The king has to be the tallest piece and cannot be over a certain height. The pawn also had to be 1/3 the height of the king (Their are more but for time I won’t include those). Once I had each piece drawn and the dimensions. I then hand wrote the program for each one. At this point in the class he only showed us the basics of programming on it. So I had to teach myself the more advanced stuff. Also we only had so much new material and didn’t want us to use too much of it. So I used nothing but metal from the scrap bin to make the whole set. The way it turned out was amazing. I also made them out of Aluminum. I’ve been wanting to get them anodized, but it’s expensive. I would most likely just do one side and leave the other side grey.
I absolutely loved your project! You’re an amazing industrial designer, and you definitely deserve to win the furniture competition!😄 I’m an industrial designer too, and I’m amazed to see the machines at your college because my college doesn’t have that variety of equipment. I’m also kind of jealous and concerned about your college’s projects, lol. It seems like the teachers take everything so seriously, and the projects are all at a 1:1 scale. I kind of want to bring my projects to life too, but we mostly just do briefings and mockups 🙁
I’ve always enjoyed perusal wood working and hearing that my high-school had wood working classes I was excited to do it, I got the classes and immediately found an issue for me, I have really really bad tremors cause of medical issues, our class had no machinery usable by students, only stuff the teacher could use with a key, so we had to use all kinds of older tools like hand planes, chisels, and some egg beater style drills. I never passed any project in class due to the first project being to make a helicopter propeller which I could never get cause by the time I did one side, my tremors were so bad that I’d end up breaking the done half. Then I had to try making a spoon, seamed easier to do never finished it by the time the rest of the class did.
I’m not a woodworker but as a designer and maker who also loves to explore new techniques and materials etc. I can totally relate to this article. Well done, the chair looks amazing and it was great to get to follow your process, thanks for sharing! Btw. It would be great to also get articles on other topics than woodworking, that light looked really cool! 😁
A stonger needle (a leather needle) is the best! If your thread is ever getting stuck, you need to rethread the machine (top and bobbin) then try again, if it’s still happening, your needle is likely bent or blunt! If it keeps hapnning after that, try a basic fabric, because your fabric might be messing it up! You did so well btw!!!!!!!!!!!!!!! I wish I could sit in your chair
Just found your website and enjoying your article, but man you took a risk at 12:55 pushing that block of wood through the table saw with your fingers between the fence and blade. That small piece of wood gets caught up and kicks back its pulling your hand straight into the blade or even one laps in concentration and it would be so easy to push your fingers into the blade. Anyway stay safe, just going to watch the rest of the build. Enjoying it so far.
This article hits so hard. It just perfectly encapsulates that feeling of wanting to give your absolute everything to your work despite the constraints of time. For me, it really brought back a familiar feeling of the passion and pain of my own school projects even though it was a completely different sort of creative pursuit. I really think any student could watch this article and see not only themselves in it, but a lot of valuable lessons that were shared with the audience throughout. He absolutely aced it, deadline or not, because he refused to give up and ultimately made a piece truly worthy of being proud of.
Those 3d printed angled mortising templates are genius! I literally spent several days last month building jig upon jig to cut a through mortise at 11.6 degrees for a seat back post to go through an armrest. It never occurred to me to make a 3d printed template. Definitely keeping that in my back pocket. Love it!
For leather patterning without a cluster of seams in the center: making a center patch (a bit smaller than butt size) to attach outer pieces to would disperse the seam cluster over a wider circumference rather than a center point! Also, there is another comment explaining how to sew strong fur seams without shaving. I gotta say though, I would not have clicked on the article if it wasn’t for the bold seat material 😁 Loved the article
I have seen chairs with a similar hung seat like that. The difference is that yours has a large carved wooden base. The only thing I would change about that chair would be the seat material. I would have used a single piece of 15oz oak tanned leather. It could be easily shaped into the seat and wouldn’t have required any sewing.
Wow, just Wow. The final product is incredible, it demonstrates the effortless and inevitable design that can only come from a VERY high effort design process. And based on this article, your process was extremely high effort, you should be proud. As an architecture student I intimately understand the late nights & long hours, the crushing defeat when you could have done more, and the absolute joy of the “Sit in my chair!” moment when it all comes together. Honestly evaluating this on a design perspective, it is very accomplished for someone so young. There are a few moments when curves aren’t perfectly smooth and I think the proportions of some parts could be slightly changed, but taken as a whole this chair is a striking, unique, and breathtaking form thats “Comfy AF” to boot. I genuinely think this is close to the caliber of the great chairs of history: think the Eames lounge chair, the Barcelona chair, the Tulip Chair, etc. This model is not quite perfect (I’m sure you know design never is), but it’s damn close. Fantastic, and well documented. If I were a designer looking for an apprentice I would hire you on this article alone.
This is such a relatable art school experience. I remember doing a screen printing project, after finishing 3 essays, and I was in the studio until 4AM where I had to kill the lights and hide from security. Then I popped the lights on, did my last layer, changed clothes in my car, and then went back in for critique. Everyone thinks art school sounds glamorous, but really you just live off cigarettes and get zero sleep.
As someone who took Product Design a while ago (I chose a different career now, not because I didn’t like it, more so because I liked music a little bit more) you have no idea how happy I was to see that your chair worked!! The perfectionism when making stuff is so real, but really I am super glad that you finished the chair in time in the end, I’m looking forward to more of your content!
I feel your pain of missing a deadline because of something you didn’t fully understand or something that went wrong because of something you didn’t expect. I was working on a article project involving 3D printing and I needed it for a school project. I then realized when about a week before the project was due, the footage was corrupted. I was totally crushed. I know that feeling, I can get behind your ability to get back up and work on. I didn’t. I gave up. I feel so bad, because I know people were so excited to see it. yet I failed. I am so glad you managed to pick yourself back up and continue. Great project by the way. I am amazed by your final product. :3 Keep doing what you love!
You could have used strong nylon fabric, cotton canvas or e.g. cordura or something and put the fake fur on top. If I’m right, you can get cotton canvas in the USA for about +/- 10 dollars per meter. You are too hard on yourself, trimming such fur with such a weak trimmer and sewing with such a plastic sewing machine is a crazy job. Appreciation for the great job! (a full metal leather sewing machine with a walking foot would have been decent for sewing and a heavier trimmer would have been better) (one option would have been to sew the upper part from an easier material and insert the fur with snaps, etc.) (you could have trimmed from a larger area and it would have made sewing easier plus it would have remained hidden anyway)
That feeling of crushing defeat when something goes wrong is known to all us designers. On the other side of it is an amazing feeling I can’t describe. ALSO that Singer HD machine isn’t heavy duty enough for that kind of sewing. You need a prosumer machine like a Juki with a larger needer and more torque. CONGRATS ON A BEAUTIFUL CHAIR!
i joke about the glossy black pants because….well….they’re ridiculous😂😂. BUT….this project was so amazing. A few months ago i toured the residence of Sam Maloof in Los Angeles and they happened to have an exhibit on site showcasing some pieces from Jack Rogers Hopkins, and your piece reminds me so much of his pieces with all the glue ups and carving. I’ve been trying to think of a piece i can do with all the power carving/contouring and hopefully I’ll come up with something i can try. Great work on this chair, i’m excited to see your future builds too👊🏻
Diffrent needle size is important. Also a diffrent type of thread. That looks like quilting thread which is ment for the end stage of quliting. It is also used to sew on sequence. Next time I would go for a heavy duty thread like what they use for leather, denim, or back packs. If you go to a local sewing shop they will be happy to help you pick out the right thread for your project. I wouldn’t go to a chain store because they don’t always hire people that know how to sew and you could end up with some bad advice.
I was a product design student before I quit school before graduating because I got burnt out. perusal your whole process making this chair reminded me how much fun I used to have when I was doing projects like this. Man, this was a good watch and the final piece looks fken amazing. Its definitely something that would be one of your main pieces in your portfolio. Please keep posting more so people like me can get a feeling of second-hand accomplishment. Thank you brother for reigniting one of my old flames. Also, I need to know if you won that competition. Id be surprised if you didnt.
I don’t often leave comments on YouTube articles, but I wanted to just say thank you for sharing this experience of yours. I’ve struggled with my mental health greatly for the past year. Motivation and drive are something that I’ve been working on, so sometimes I seek out articles like these to hope and grasp at some amount of passion that I still have left in me, and well… seeing the ending screen say “Winner 2024” made me start crying. I am so happy and proud of you, and I hope you are proud of yourself too. You have really inspired me to keep pushing and trying and enjoying life. Thank you. I will keep pursuing my passions and not let my mind hold me back
Now that is a great looking chair and better than most architects have done because it is also functional. Most furniture that architects make looks good but no one wants to sit in it because it is just uncomfortable. You do great work and it is rewarding to make something great and you certainly have. You did an amazing job and do not let anyone make you believe otherwise.
That was a beautiful journey to a really great result. In this age of powerful tools, getting organic shapes like that with a grinder seems obvious but I got the sense from perusal this article that you would be the kind of artist who could really benefit from and enjoy getting skilled with chisels and spokeshaves. These old fashioned hand tools may seem quaint and slow at first but a skilled artisan can get to otherwise impossible forms and once you’re good with them they are actually much much faster than you ever expect and often the quickest way there (and chips are much more satisfying than sawdust). I’d also say that given the step of shaving the fur, you would have been faster hand sewing – you wouldn’t have had to shave it – just get some Coates upholstery thread which is super strong and pull it really tight every few stitches. So yeah, love perusal you level up and just want to advise that some hand techniques can often be a powerful alternative to power tools. Happy making!
Sitting down for the first time is… nerve-wracking. It would have been fun to weigh all the lumber you got… then weigh the chair once it was done. It’s always stunning (and sad) to think about how much ‘waste’ there is in most chair making. I always wondered why chairs cost to much (just average, normal, not competition-worthy ones)–before I made my first one. It ain’t easy–but you earned your award, and what you made is beautiful!
This mindset, approach, highs and lows, and admittedly ego, are all reminiscent of time in University in the design program. Awesome art piece. You’ll learn soon that efficiency and repeatability is also a huge part of the process, and complexity doesnt necessarily improve a project. Great work! Try some rubio monocoat on a walnut piece next time, that gel stain is hiding so much of your beautiful grain!
“Enclave is striking, bold, and one of a kind. Its design is sure to catch one’s eye. Yet despite its distinct and unique form, it still fits within the styles of today’s world. This statement lounge chair draws the eyes in with continuous curves that sweep seamlessly throughout the form, creating a visually stable yet flowing structure. The suspended seat is made from faux fur, its form displaying how it would hold one’s body perfectly, inviting oneself to experience the comfort of its embrace.” – SIT Furniture Design Award Prize: Winner in Lounge chair
When they finally completed their project and saw that they had actually brought it to life, it gave me a revelation: as long as you keep going, remain consistent, and stick with it, you can see it come to life. After all, a goal without a plan is just a dream. And then, when they realized there was nothing else like this on the market, it reminded me of how God sees us. He took His time to carefully knit us in our mother’s womb, paying attention to every detail, no matter how small. When He was done, He sat back, just like they did, and took pride and joy in His creation. He said, “This one is one of a kind, unique, and there is nothing like this person—My creation—out there.” As an artist, I can say that we hold each of our creations near and dear to us, so I can only imagine how God sees us! Psalm 139:13-14 (NIV): “For you created my inmost being; you knit me together in my mother’s womb. I praise you because I am fearfully and wonderfully made; your works are wonderful, I know that full well.”
Exceptional design and the end product does the design justice. From a woodworkers perspective, the material choice, execution and construction could have been better. The main points are: Walnut is not the ideal wood species for an application with potentially high flexural forces, especially in that thickness. Ash could have been a viable alternative if stained to the right shade of brown. Visually, it’s open-grained like walnut, although ring porous, not semi-ring to diffuse porous like walnut, but it has a substantially higher flexural strength and modulus than walnut. I would advise a +200lbs individual against plopping down in this chair. The tenons connecting the vertical parts to the base are undersized. When glueing end grain to side grain, the purpose of tenons is to increase the glue surface (provide side grain to side grain glue surface) and increase the shear strength of the joint. The minimum size tenon for standard 80in solid wood framed doors is .75x2x4 to prevent warping or joint failure. The tenons for your chair arguably should have been +6in, with the same cross section you used. The joint may not fail in the near future, but I estimate the risk of failure after years of regular use to be substantial. I won’t get into the execution because I think you did very well considering the tools you had available.
Hey kyle, it’s Jagdish from India and I am a fabricator and manufacture of stainless steel in all kind of welding and Cnc and leisure cutting work. I like what you did. If you need anything in terms of you know stainless steel or mild steel, aluminium, copper, brass, you know anything, you need. Just let me know. I do all kind of stuff and, just let me know
I fucking LOVE (&hate) this article because it’s giving me a bloody anxiety attack everytime you say you missed a crucial deadline, flashback echoing in my head from back when I was student. unsolicited advise below: I hope you dont me mind saying it but you really need to decrease the amount of workload your putting onto yourself double down on building even its just a mockup during the first two weeks because you get to build more and will have backups and work that says look at these previous iterations i’ve made instead of a sketchbook and just some research (yes I missed deadlines way worse then yourself so dont give up and dont feel down even though you still will its not as big of a deal as you make it out be it’s not the end of the world and you all that good stuff but I promise in a few years you will tell yourself why did I even stress out about something like that) P.S. Your also running a successful youtube website alongside going to school and documenting (i hope you can use you footage for credits or something) your work which is kind of amazing I would’ve probably ended repeating a year or two if tried something like this it is honestly great and will most likely work out in favour down the line.
Dude I got into the probably best industrial design major in my country but was feeling insecure because no one (including me lol) even knew such major existed and I chose it cause my exam results were not enough to be a computer engineer but wow, this makes me so excited to start in a few weeks! You look so cool and the thought of creating something so awesome from some blobs of wood makes my heart flutter lol. Keep up the good work brother!
Bro I was going through so much and couldn’t sleep I was too tensed and traumatized for my future and couldn’t sleep but now after perusal your article I feel relaxed and motivated too learned a lot from you thanks for the help buddy now I can finally go to bed. sorry for bragging too much 😅 by the way excellent work you got there I am definitely looking forward to own that chair one day may be in future. Bye have a good life bro. ❤❤❤
im not a woodworker. i dont know shit about it. but i feel your pain. a few months ago i built my own steampunk stiled desk using blackened steel pipes for the frame and legs and a simple plywood board as the desk part…. getting everything lined up and stable was anxiety inducing. especially since that desk has to hold up my 15KG computer, desktop and my own fat ass. i dont know how but its holding well….
Wow, that was a lot of walnut that went into that chair. I could not mentally handle the amount of lost material so would have done something about that, maybe some bending of thinner cut material. But that might lose you the contest too, lol! The finished product is amazing, nicely done. We are all jealous of your shop equipment, btw.
Brilliant work. Makes me miss shop time doing my ID degree. I feel like I had the same approach too; go all in on a thing I want to make with little care for marks or time. To learn and create was the goal. Side note, your design is similar in concept to one I did in a similar class, but I used carbon fiber, acrylic, oak and aluminum… mistakes were made, time was eaten and I have yet to sit in it. I should finish it, thanks for the inspiration. Top notch work.
I have 2 major questions after perusal the whole article. Firstly what was your brief or intent behind designing this piece of furniture? and secondly have you given a thought on fabrication aspect before starting to make the furniture. I mean did you resolve the design to a manufacturing state beforehand? I am asking this questions because being a furniture designer i can see that the making process you followed can be further simplified to a much simpler state while using a lot less material. You have used a lot of material to achieve the structure and honestly it can be very easily achieved by other simpler techniques. 1 major feedback i would like to give you would be prepare beforehand the making process and how would you go around it, because while perusal the article it seems like you were not sure or unaware of the further steps and the decisions were made on the spot which could be sometime cost you a lot of time and sometimes waste of your efforts.
This was insanely satisfying to watch. Very beautiful work of art and possibly the greatest gamer chair lol. Seriously, this looks awesome! You are a new woodworker who is still learning, I’d say you’re doing pretty great. Keep pushing man, I know you’ll do bigger better things as time goes by. Project articles like this are maybe the best genre on YouTube right now. Nothing calms a tough day for me like perusal beautiful art being created. Thank you for sharing
I don’t have any experience in woodworking or sewing, but oh my gosh this chair is so beautiful and you should be SO PROUD of yourself. Also, this article was so good!!!!! I loved seeing the ups and downs in the process, and I truly am so happy that I clicked on this article!! Good luck in the design competition!!!
cool you made it yourself and all but that’s the most dirt nasty garbadge i’ve seen so far there is always this one trashy wannabe designer store selling stuff akin to that for 10k a pop the chair is uncomfortable, you just sit in a stretched canvas, it has no utility or actual use it’s just decoration for tasteless new money good job tho
I’m new to this website but i already love your designs and work I know you said you wouldn’t upload your next industrial design peice bc it’s not but I would love to see it and I think others would too ever think of starting a new website for all your designs in general it could bring a whole new audience
Re: Not finishing an elaborate project by the first deadline. The struggle is REAL. I’ve been having that 11th hour panic since I was 9 years old and in 4th grade. 😂 Next time you sew something that’s bit fiddly, try using single or double-sided fusible interfacing. There’s different colors, thicknesses, and everything of said interfacing. If you’re in the US (I’m not sure, this is the first vid of yours I’ve watched) the best brand to look for is Pellon. The way this interfacing is applied…..You take a steam iron and press the adhesing side of the interfacing onto the back of whatever needs reinforcing. The way to do it without melting the polyester in the shaggy fabric is by using something called a pressing cloth/pressing mat. If you’ve gotta press something curved, using a pressing ham. If you need straps to anchor to something, yardage of nylon strapping, cord, and elastic is sold. If you need to sew something that’s got many layers or tough fabric, using needles with stronger shanks (like for denim or leather) woukd be your best bet. Using a strong double needle wirh a straight stitch would be awesome too. Some sewing machines also have a quilters setting that allows you to drop the feed dogs (the little grabby metal parts below the presser foot) so there’s far less chance for something chunky (like a quilt or fuzzy chair hammock) to get caught up in the needle or bobbin. (The bobbin is the part below the feed dogs that’s responsible for the spool which holds the anchoring thread from the bottom of the plate.