To transform an ugly exterior wall into a feature, consider adding bright contrasting colors like orange, yellow, and red to make your plants look more lush. Or, blend the wall into a stunning timber feature screen. Adam Dovile shows how to create a timber feature screen to disguise an ugly brick wall. Cover the wall with plants and greenery to enhance the space with color.
To cover up an exposed concrete foundation, explore some of the best foundation coverings and techniques. If you have an ugly wall that spoils the view and upsets the garden’s ambience, consider attaching some form of covering. Here are seven easy ways to turn an ugly wall into a masterpiece in your garden or outdoor area:
Build a raised bed at the base of an unsightly wall to hide the wall behind it. This method is useful for medium-sized gardens that can dedicate space to a raised bed.
Create an outdoor reno with garden screening ideas. Screen with plants and greenery, add wall decor and pot plants, make it functional, create a textured wall, and invest in high-quality screening.
Paint is one of the easiest ways to enhance the appearance of boundary walls. It can either help the wall disappear into the garden or turn it into a feature.
Re-paint or re-render the wall. Plant underneath the wall to give it a fresh look and protection.
Install vinyl or wood siding for a new appearance. By incorporating these methods, you can transform an ugly wall into a beautiful feature without knocking it over.
📹 How to cover ugly walls for free (almost)
I’m tired of looking at my neighbor’s ugly wall so I decided to cover it with the pallets and a few pine beams that I have. I didn’t use …
What material is used to cover exterior walls?
House siding options are often influenced by factors such as cost, insulation, and environmental impact. Cost is a key consideration, as it can impact the comfort and HVAC bills of the finished home. Wood, aluminum, stone, and brick have the highest R-value and offer the most insulation, while insulated vinyl siding is popular for its energy efficiency.
Choosing the “greenest” finishing material is complex, as wood siding is a renewable material that is lightweight but requires frequent replacement. Metal siding can be recycled and lasts longer, while insulated vinyl is energy-efficient and lightweight. Brick and stone are natural materials that last the longest but use a lot of fuel for mining and transport.
ClarkDietrich offers finishing solutions that work for exterior finishing, addressing installation and durability concerns in modern home building. They work with contractors, building developers, engineers, and architects to help buildings perform to tomorrow’s standards. Visit their website to explore their offerings for interior and exterior framing, floor framing, clips, and accessories.
How to cover an exterior wall?
In order to enhance the appearance of an exterior brick wall, one may consider painting it for a fresh look and protection, installing vinyl or wood siding for a new appearance, using climbing plants like ivy or other plants for a natural look, or applying stucco for a textured finish. Such an approach can enhance the appearance of the wall, provide protection, and impart a distinctive character to the space.
How to disguise an ugly outside wall?
To disguise boundaries, paint walls in a dark color and plant foliage in front to make the wall disappear. For a feature, choose a bold color that pops against the landscape’s natural colors or create a unique mural. Lime paint can create a natural-looking finish and texture, making it ideal for transforming damaged or mixed-material walls. Render is a great way to neutralize the entire surface of an exterior wall, creating a smooth finish ready for painting or giving the wall a slight texture and sense of age. It’s also ideal for transforming damaged or mixed-material walls.
How to cover a bad wall without plastering?
Joint compound is a versatile solution for a smooth wall surface, allowing for multiple coats and reducing mess. It fills gaps and holes between plasterboard and can be applied with a trowel or putty knife. Sanding is another option for old surfaces, but it requires a suitable grit and is best for removing old finishes. Sandpapers can range from coarse to fine, and dust should be avoided before painting. Lining paper is another option for a smooth surface, similar to hanging wallpaper.
It can be used to cover cracks and imperfections, but it’s important to choose the right thickness and grade. Joints between pieces should also be carefully considered to avoid a noticeable finish after painting. Overall, joint compound, sanding, and lining paper are all effective methods for achieving a smooth wall surface.
How do you camouflage an outside wall?
Landscape gardener Amber Freda suggests using evergreen planters to hide unattractive views and add greenery to spaces. Planters along the base of walls can help break up the wall, while smaller trees like olive or cherry trees can look attractive. Wall climbing plants, such as bourgainvillea, boston ivy, or grape vine, can be a great option for those who don’t want to plant trees. In Melbourne, bamboo was used to disguise the wall behind, as it is evergreen and fast-growing.
Bamboo can clamber up the wall or fence, creating a verdant living wall. For those less inclined to gardening, artificial plant rolls or panels that look like English ivy or boxwoods can be a quick and easy DIY project.
How to cover up an ugly wall?
The article presents a list of ten DIY ways to hide ugly walls in your home, ranging from expensive to cheap. These ideas are executed or conceptualized by interior design professionals. One of the most popular is installing a wall-sized bookshelf, which is relatively inexpensive and easy to purchase due to the saturated shelf market. Another option is to hang a curtain, which can be done using a wall tattoo, a lamp, a fake window, or a map mural.
These ideas are designed to hide any unprepossessing wall in your home, whether it’s due to recurring water spots, pushpin holes, old sheetrock, or plainness. The article encourages readers to explore these options and find the best solution for their home’s unique aesthetic.
How do you camouflage bad walls?
Wall damages are common, especially with heavy furniture, and can be easily ignored. However, if the damage isn’t hidden, you need more creative ideas than just repainting the wall. Here are seven unique ways to cover, repair, hide, or turn wall damage to your advantage:
- Temporary wallpaper: An easy solution for temporary wall damage.
- Wall tiles: A lasting impression for your walls.
- Tile decals: A great way to redecorate tiled walls.
- Wall decals: Let the walls speak.
- Tapestry and curtains: A signature theme.
- Art accent wall: A unique and creative way to add art to your walls.
In summary, wall damage can be addressed through various creative solutions, such as temporary wallpaper, wall tiles, tile decals, tapestry and curtains, and art accent walls.
What can I put over a bad wall?
Wall damages are common, especially with heavy furniture, and can be easily ignored. However, if the damage isn’t hidden, there are creative ways to cover, repair, hide, or turn it to your advantage. Here are seven creative ideas:
Temporary wallpaper: This is an easy solution for covering damaged walls without paint. It is inexpensive and offers a wide range of textures and designs.
Wall tiles: This is another easy solution for covering damaged walls. They can last a long time and make a lasting impression.
Tile decals: These decals can help make the walls speak, letting the walls speak.
Tapestry and curtains: This can be a signature theme, and wall decals can add a touch of art to the room.
What is the cheapest way to cover exterior walls?
Vinyl is a popular choice for covering exterior walls due to its affordability and variety of colors and styles. Other popular options include wood, composite, mortar plaster, stone, fiber cement, steel, and stucco. Brick is a popular material for exterior walls due to its physical strength, aesthetic appeal, and energy efficiency. However, it lacks design variations, making it more likely to be repetitive.
Additionally, brick is difficult to install, requires professional masonry expertise, and repairs can be expensive. Despite these drawbacks, brick is a durable and sturdy option for transforming properties into homes. Other popular options include mortar plaster, stone, fiber cement, steel, and stucco.
How do you make walls look less bare?
Art can serve as an effective means of enhancing the visual appeal of a vacant space by establishing a focal point. The combination of two or more artworks of a similar nature, such as two prints of the same subject or a collection of smaller prints, can result in the creation of a gallery wall. Notable online art retailers include Desenio, Etsy, and Fy. An exemplar of this approach is Lisa Dawson’s “Shelving the entire height of the wall.”
How can I make my plain exterior wall look better?
Outdoor walls can be transformed into attractive spaces by hanging planters, using metal wall art, hanging paintings, outdoor lighting, reclaimed wood art, trees and plants, feature brickwork, painting a mural, or even incorporating brickwork. However, decorating a blank wall can be challenging due to its limited options and potential limitations for renters. However, there are many easy and affordable ways to decorate a blank exterior wall, such as using wall art or water features for large spaces, or incorporating decor or vertical gardens for small spaces. The key is to find the best approach for your specific space, as the possibilities are endless.
📹 Got UGLY TEXTURE? Skim Coat it away.I’ll teach you how
Smoothing Out A Rough Textured Wall. I’ll show you tricks for Smoothing out a Textured Wall or ceiling to end up with a super …
Very neat. Though, I kind of actually liked the stone accent with stucco look, since it is a style some people aim for. Sure, it needs to look clean, fresh and newer to achieve a stylish rustic vs old decrepid look; but, I’m sure you can freshen that up a lot faster than building a wooden facing when the wood starts to rot in a few years. Awesome job though!
WOW! Much Respect~🤗 (Watching this makes me miss helping my Ex. He’s a carpenter and can build a house AND the furniture! I just helped on minor projects…he is too much of a perfectionist to let me near anything else!😂😂😂) Oh, what did the neighbor say when you were done? Wish you were my neighbor!
i Built a complete 10’x 10′ x 7′ tall shed for my Dad out of pallets and only had to buy the felt and roll roofing i used the nails from the pallets so i didn’t have to buy nails only hard part was pulling nails straightening them as i went overlapped the wood so it was water tight even made a door with the pallets 19 years and its still there not 1 board rotted Ash wood is tough it wont rot like birch or pine most all pallets are made with Ash because it doesn’t rot……….ever seen a rotten set of drum sticks or a baseball bat they are made with ash
Please people…. please read all replies before your comments……this would keep Mr Ollari from having to answer the same questions over and over and over…..I would rather see him spend his valuable time creating more useful and beautiful items…. creative people help my creativity…..thanks again Mr Ollari for your time and patience….. Fran…… Florida
I really love how this came out, but I must say I REALLY LOVED the old stone crumbling wall. I suppose this helps hold the roof up some? Us americans don’t get to see such old buildings. I want to do this around our mobile home, it’s so hard to hide how ugly they are.. this looks pretty cool and would work great for our situation. Thanks for showing such a simple solution.
*********SINCERELY I LIKE MORE THE WALL WITH ITS HOLES AND EVERYTHING IT HAS MORE PERSONALITY THAT YOUR WOOD WALL. YOU JUST NEEDED TO ADD SOME PLANTS WITH STEEL BASE MAYBE ONE HERE OTHER THERE, SOME HANGING FROM THE WALL AND IT WILL LOOK PRETTY WAY BETTER THAN THE WOOD FENCE BUT EVERYTHING IS A MATTER OF TASTE.*******
Nice job ! Thanks from France ! My grandfather made a big barn door this way, some decades ago, then he painted it, with the old motor oil coming from the ’63 Massey Ferguson model 30. He passed away since that time, but the door is almost intact. No worms will try to eat that wood, and the nails are more protected from the rust too. A useful way to recycle your (free) old motor oil.
I thought the wall beautiful! You could see the layers of history right their! In many Irish villages and towns THIS is how the buildings look. You see the first layer built by the Viking influence covered up by other layers through the ages. You DID. A wonderful job, no question. And the wood will age. I just liked the story the rock and mortar had to tell.
Its not more easy stucco the wall?? And more cheap?? But its beautiful your work!! And i love the rainny moment with the eyes and face of your dog i want to stay with you making a barbacoa or a Fire for hamburgers with a cold beer,… Thanks for share this paceful moment. And i dream with wood machines like yours, im a girl and i have to work with and old harmer=(… For my dream projects!!!
Looks really good, and very well built. You were fortunate that the roof trusses were the width of a pallet apart! I think i’d have wanted to put up extra vertical slats and then have a brick pattern with the timber overlapping by 50%, maybe then left the timber raw to have the different timber form a random pattern? It turned out really well though and once it starts to age and silver will look even better. Subscribed for more articles! Have a great day.
Es un lindo trabajo, y además se aprovecha bien la madera y es una excelente forma de reciclar, pero la verdad es que el muro se veía bonito también antes del revestimiento, y podría haber admitido algún tratamiento conservando el aspecto rústico y calculadamente descuidado, agregando algunas plantas y flores. Lo que no se ve bien son las latas del costado…
My neighbor scraps metal so he has hot water heaters, stoves, washers, and JUNK. A lot of his TRASH and JUNK blow over or end up in our yard. Hes too tight to get trash pickup or go to the dump, and he burns a lot but most ends up on this side of the fence (that doesn’t exist). THIS IS PERFECT. No more JUNK. No more TRASH. Just a FENCE. HA
nice look but it also creates rat and spider/bug haven. If you used 10” wide boards and spaced them with a 1 1/2″ wide, slightly recessed wood strip; you could leave the wide planks natural and paint the thin spacers with a cream white paint to resemble chinking. Would go well with the lower rock foundation. And you eliminate access for pests.
I find the original wall quite nice, rustic, romantic and pittoresque. I would have painted the wall white except for the cracked off parts where the original stones are visible. That wood is nothing but junk, and not even worth the effort to cut up for a fireplace. But you suddenly got the sponsor message from Scheppach through – that’s for sure… 😉
Great article and lovely finish to the wall.. Although how the hell is this ‘Free-Almost’ ??? The amount of wood you have there would cost quite a substantial amount. The chances of obtaining that much wood free is very slim! Also, the tools you use to cut the wood, not everybody has. And so it would cost a small fortune to have these cut, then transport for them if you do not drive. the term Free or Almost free does not apply here under any circumstances or at least should be followed by ‘if you own the specific power tools and specific amounts of wood. no sub from me at this time due to this.
I’m not sure which country this was filmed in but screw-fixing a timber screen to the neighbours property could make you liable for damage which results from your work. You have loaded a significant weight onto the structure on one wall, if the wind catches your screen then your timber structure could rip parts of the wall and roof away, the fixings that you drove into his or her wall don’t look particularly substantial but they could cause damage, if your timber screen catches fire then the surface spread of flame could ignite the roof. Why not just build a free standing fence in front of the wall rather than attach to it or even better, why not just split the cost of rendering the wall? Its a nice job but I suppose beauty is in the eye of the beholder. I actually think the old wall has a lot of character.
Wish I would of seen your articles years ago good sir. I’ve learned most of everything you teach through trial and error and a quick witted intuitive approach to everything. What you teach is absolutely gold. Been on my entrepreneurial journey since 23yo. 27 now and charging head strong to be the guy to call for any drywall and painting needs in my local area. Self taught drywall because to any good finish, the base is key! High end finishes is my happy place. Thanks for your insights and God bless you and God speed on your recovery!
You’re an absolute blessing! Thank you so much for making these articles!! I was able to remove popcorn ceilings because of your tutorials & now going to tackle orange peel walls. For people on fixed incomes & gas prices $5/gal & food sky high, it’s hard to have extra money to pay for things like this. Thank you again & God bless you sir!
BAD NEWS- Hey everyone, as of 9/21/20 we have some bad news. We are suddenly being kicked out of our rental due to the sale of the home, (we were planning on buying next summer) and I’m having some tough medical issues such as Prostate Cancer, Permanent Vertigo, Restless Legs, Neuropathy (nerve damage) etc. So we put out a article explaining this and many of you asked us to create a Gofundme so you could say thanks for all the help I’ve given you on these articles, my comments, etc. I really hesitated, as I hate asking for donations, but then you said it wasn’t a donation, it was a way for you to say thanks. So if you want to know more here’s the article explaining what all has been going on (moved 9 times in 12 years, my wifes 3 knee replacements, and much more). youtu.be/aRMwK_LTQQs You can also just read about it on the gofundme page at: gf.me/u/yzzrkz NOTE: please don’t contribute if it puts any strain on you at all, and there is zero expectations, or anything like that. But if you’d like to give back, Thank you. PS: help me reach 100,000 subscribers by my birthday on June 10, 1961
NOTE FROM GUY : You can find all the tools in our articles at our Amazon Influencer store. We also have special lists for drywall hanging tools, Drywall finishing tools, Advanced drywall tools, general tools and supplies, gift ideas and more. You can find it all at- bit.ly/GuysAmazonStore – ALSO- to see all our links and other information in the description, click on the words ‘ SHOW MORE ‘ which is just a few lines below my website name with my picture beside it. This seems to confuse a lot of you so I wanted to make it easier. Thanks for all your support. Here’s a couple more articles that can help you with Skim Coating- Skim Coating is Overused & OFTEN Not Needed youtu.be/xK-Vx_ptgHg How to Skim Coat a Ceiling with a Paint Roller, the FAST & EASY Way youtu.be/wgqbQRJcZ8c
Thanks! I knew what to do on this article..but the screen tape article and applying the durabond on the bed coat makes all the difference in the world! Thank you so much! On larger jobs I use 45…of course smaller jobs 5 min or 20min! Again I know the 2 bucks isn’t much but it’s just a token of appreciation!
Never done a skim coat myself. Doing plenty of research from many different people. My mothers bathroom looks like, and has, been patched about 30 times over the almost 80 years of the houses life. Since she only HAS one bathroom it has really been a nightmare setting up a toilet everyday. Floor joists up have been replaced. Sadly I am NOW on a tight budget. I have mud and most this stuff. So instead of just tearing out the walls and replacing them I am going to skim them. Can’t wait!
Mr. Kilted..i can’t adequately express how much i appreciate your teaching us these skills. When my brother got killed in Vietnam dad turned to me & said You gotta take his place. & i did, even though i was just an 8 yr old girl. My dad taught me a lot, i can build a house up & tear a house down. Same with a car, to the chassie & back. Patios, walls, sidewalks, fireplaces. Electric. Plumbing. All but furnaces. He said leave those to the experts & i agree. He was so proud that i could drywall better than he did. (i Hate insulation though) But..that was many years ago. Materials change. Techniques too. & here You are filling in the gaps! i rent now & landlords leave a Lot to be desired, most of them are absentee. Mine is. He fixes Nothing. So..i do what i can. Bless you for being You.
after switching from residential painting mainly orange peel walls to commercial painting doing alot of schools and factory’s i ran into alot of smooth walls painted with semi gloss and the room for error while painting smooth walls in semi gloss is very slim. its one of the more difficult things to do when painting by hand. if you dont get it on perfectly even u can see it so easily. also painting steel fire doors by hand is another tricky task when going for a almost spray like finish.
Thank you sir for sharing all your years of experience as a drywall master. Truly invaluable for us newbies trying to get a good result our first time out. I have a big first time kitchen walls and angled high ceiling job that I’m going to tackle on my own. If it weren’t for you I don’t think I would even attempt it. I hope I do alright and I’ll take some before and after pics.
☑ NEW, get my 56 page Free eBook “Understanding Drywall Tools and Materials” at DrywallToolsBook.info ☑ OR, for the full version with even more information & to support our website, go to geni.us/DrywallToolsBook ENTER TO WIN a 24″ SKIM COATING BLADES and many other great prizes at: raffall.com/345505/enter-raffle-to-win-a-free-skim-coating-blade-hosted-by-that-kilted-guy-video-productions youtube.com/s/gaming/emoji/7ff574f2/emoji_u2611.png☑youtube.com/s/gaming/emoji/7ff574f2/emoji_u2611.png ⭐ MY DRYWALL TRAINING EBOOKS ⭐ 🟢 Take the next step in learning. Read my new ebook “How to Quickly Improve Your Mudding Skills” at: geni.us/DrywallsecretsEbook 🟢 Learn tips & tricks for spraying Knock Down Texture- geni.us/knockdownebook 🟢 Guide to Drywall Sandpaper, what to use, when etc- geni.us/SandingGritGuide 🟢 And you’ll find even MORE ebooks and guides in my store. ☑ DRYWALL COURSES- Sign up for our email list to be notified of future Drywall Courses you can take, AND we’ll send you a discount offer each time we release a new course. Sign up at: thatkiltedguy.com ☑ WEBSITE INFO -You can find a lot of bonus information on our website at: thatkiltedguy.com 🛒🛒🛒 SHOPPING LINKS 🛒🛒🛒 – – – – – – (we earn 3-5% on these sales, thank you) – – – – – – ☑ LEVEL5 Drywall TOOLS (Financing Available) For 10% OFF Any tools, enter the code KILTEDGUY10 🟢 For a 10″/12″ Flat Box & Pump combo set – geni.
NOTE: If you appreciate our help with your project and would like to support our website, please consider joining our YouTube membership for as little as three dollars per month. You can join by clicking the join button beside the subscribe button on any of our articles. Thank you NOTE FROM GUY : You can find all the tools in our articles at our Amazon Influencer store. We also have special lists for drywall hanging tools, Drywall finishing tools, Advanced drywall tools, general tools and supplies, gift ideas and more. You can find it all at- bit.ly/GuysAmazonStore
I have watched most of your articles and they are very helpful. Thank you so much. The problem I am having is air bubbles. I am skim coating over painted texture walls. I sanded them down and used Gardz and primer over them and then used plus 3 slightly watered down. After rolling it on and smoothing it out I am getting bubbles in random places. I wait till it dries a little and then smooth it again and that sometimes solves it but sometimes it doesn’t. Any tips on air bubbling?
My DIY project has a 5′ x 5′ Durrock Concrete board, set inside a Drywall constructed wall, to meet fireplace non-combustible needs near the firebox. Do you have suggestions / a article(s) covering skim coating Concrete & Drywall surfaces ….. especially treating the joints where the Cement meets the Dry Wall. I don’t want to use brick tiles, I just want to paint everything. Is there one product that can skim coat both materials. I am trying to avoid using Bricks on the Concrete portion, and continue the paint from the Dry Wall out over the Durock. Durock says to not use Sheetrock 90 on their product, even though several folks have suggested it. Some articles suggest using a ‘bonding agent’ (??) the Cement portion first, then Dry Wall mud; but I can’t seem to find an example of that used on Durock. Do you have a article(s) that addresses these points ?
I watched so much of your articles to prepare me for a big undertaking of skimcoating over horrible diy texture that the previous owners did in our home. I started knocking down high points and the joint compound just started coming off. Lucky for me they did not properly prep the wall and put joint compound straight over oil based painted walls. All I have to do is scrape lightly scrape some of the paint (again laxtex over joint compound,comes off super easy) spray with water and it just scrapes right off. This was 1/4 inch thick some spots Even though it’s still work to scrape all the joint compound off in still left with a smooth wall with some minor damage from wallpaper removal in some parts. I ordered some gaurds and now I feel alot more confident that I can actually make this look good since I’m starting with an already pretty smooth surface. I guess their lack of proper prep worked in my favor. I will actually prime and everything to ensure my skimcoating actually stays on the wall lol
OK… After 35 years…. I never use paper for sanding…. only screens!! No scratches from paper on my level 5 walls that I do on almost every job!! I am the Mud Master!! 3 coats is my standard on covering textures to achieve this. I always sand my walls with a pole sander. The big machines will not sand to perfection. I get 50.00 per hour all day long. Not much, but, not too little either. BTW… iF YOUR REALLY GOOD….. you can listen to people apply and finish thier mud with knives and know if it is too thick or too thin. A blind man can hear how good you are!! It’s a sickness is all I have to say!!!! Mud Master Out!!!! Good job on the training though !! P.S. I apply in circles, if that makes any sense!!!! I should do that article!!! :face-turquoise-covering-eyes:
We recently moved into a newly built home here in Florida and have orange peel/textured wall and ceilings. We absolutely hate it. We both said the same thing, “The model home did not have the same type of walls.” ugh! I thought about tackling this myself, and while you do a great job of explaining this, I don’t think I have the patience to do then entire home, let alone one room. I am sure this is going to cost $$$$$.
Watching these articles are so hard because you make it look so easy. I tried skim coating my soon to be office as I want the walls at level 5 before I paint. But when I used my speed skim to smooth off the mud I just kept pulling all the mud back off the wall. Maybe a article would be really helpful for total beginners like me on how to properly angle the speed skim/knife. I will give it another go on my next day off but in the mean time I will be perusal these articles like a hawk
I want to install adhesive tiles to make a temporary backsplash in the kitchen of my apartment, but I think I can only do that if I sand down the area I want to stick the tiles to. When I get ready to move out, how hard will it be to retexture the walls? Can I get a professional to come in and touch it up?
This is a great article. My concern is you mention painting the walls after using a roller. As someone that recently painted my kitchen cabinets I have found that using even the best rollers that money can buy will leave a texture. Shouldn’t the walls really be spray painted after? And what about down the road when you need to touch up any scuff marks on the wall…if you put some paint on a smooth wall using a paint brush will you see where you touched up?
do i need to skim coat if i took out the door frame and flushed the drywall corners? I took out the door frame from our mudroom to make it flush with the wall. i have to install drywall corners and refinish the wall. the wall was already painted but some paper came off so I puttied it again but it now has big patching marks so i am wondering if i should skim it or just sand??
Not about drywall but i am doing a project on my mobile home and as may guess,i am trying to cover the lines in the paneling.I have never applied mud before and i really enjoy your articles.I would really like to know if you could put out a good article on how you would tackle a project like this because there are very few and the one that are out there are not professionals like yourself. There are so many mobile homes out there and i for one cannot stand to look at painted paneling with all those lines! Looks like trash. Pulling the paneling down and putting up new drywall is not feasible as you have to watch the weight and after all it’s just a trailer,you want to be careful about how much money you want to put into it as there is zero resale value. Thanks!
I’d like to see you do a skim coat on OSB. OSB might cost twice as much but I can mount anything anywhere without searching for a stud and it is very durable. I did the interior of my garage with it and then coated it with floor urethane. It turned out wonderful. However, now I want to put up some walls in my basement. I’m also wondering if it is possible to do away with some of the sanding dust and effort by using a damp sponge at the right cure time. I’ve never tried that before but I watched a guy do it once and I was amazed by it. Thanks!
Great article, I needed some reassurance I’m doing a lv.5 in a small closet, I did this by choice because it’s kinda silly to do it in a dark closet but I’ve always admired a non textured drywall finish and wanted to try it for myself, it’s looking great, a lot of work though! I can’t imagine doing a whole building.
Your articles are incredible; I have watched a ton of them. I can’t remember which article it is, but you went the difference of the “Blue Lid” Plus 3 and “Green Lid” All Purpose pre-mixed joint compound. I have always used Plus 3 (watered down to different viscosities) for my first, second, and final coats for mudding. Would you suggest the Plus 3 for skim coating over a (very poorly executed) sand swirl wall? Or would the extra adhesive that’s in the All Purpose mud be better for this application? I know it’s a bit heavier and dries a lot harder than the Plus 3. Thanks for your great insight on all things skimcoating and drywall!
Hello! Your articles really helped to me to fix a lof of defects of my ~600sqft ceiling. I think you are doing an excellent job with delivering your experience through the articles! Currently i am going to do a lvl 5. Almost done with it and applied primer. The problem is – after priming, all those little touches are appearing very well. They have been sanded before primer, but still you can see them clearly. Curious if I can share some photos with you for any suggestion. It feels like I need to redo skim coating but I don’t want to make the same mistake again. Any guidance will ne appreciated! Thank you in advance
Thank you so much for all of your information and guidance. I have been dealing with contractors who are unable to perform basic drywall installation, drywall patching, and painting. I have been very disappointed in their lack of ability and/or carelessness expecting a level 5 finish but but only to find substandard work. You provided a detailed description of the different levels of wall finish and stated that I would be able to find that information in a link below which I was unable to find. Would you please provide the link for the different levels of finish so that I can better discuss with my contractor who has indicated that my expectations for a level 5 wall finish are unrealistic. I enjoy your informative articles and appreciate any assistance that you can provide. Thank you.
There is no level 3 4 5 or any other its just your level of professionalism i always think of the next person that comes after me i want him to think “that last guy done a good job In the UK we generally use a non sanding needed multi finish plaster with various undercoat depending on depth or state and condition of whatever your plastering The UK multi finish method,you work hard but it means you can finish the areas youare working on in one day,no 2nd or 3rd day on same area Ive rambled enough I wish your website well sir good day
Watching your articles. I have the popcorn ceilings. They do not have any type of primer under it. It’s starting to fall off in different places. I want to remove it and seal, and paint over. I’m doing room by room. I am starting on my guest bathroom first to get a feel of what I need to do. So what I’m asking is a A-Z procedure.
Little advice please. Been in home repair/carpentry heavily for the last few years. I can handle my own but drywall has always worried me. I can fix a patch, apply orange peel and all the basic stuff just fine. Lots of practice and learning from people like you. Getting more into drywall and the tools/tricks of the trade. Like not using multi purpose box store mud for all jobs. My question to you. Do you use glue and/or dish soap? No, why? Yes, when and why? Like to hear from professionals like yourself
Thank you KG for all your help! I have done two rooms thanks to your articles, taken my quality to level 5! Might I suggest, I used a headlamp at night for the final sanding, for the rooms that I did, just went along the ceiling when I worked on that, and then for each wall. It worked sweet to use a headlamp at night and kept my hands free to achieve that smooth level 5 I was looking for while sanding or touching up w more mud in certain areas.
Great vid, I had a hell of a time finding a good one about coving up texture. I wish I would have found this earlier as I’m already 80% done with converting all the textured walls and popcorn ceiling to lvl5 and it’s been a nightmare. How do you avoid the bubbles? For the life of me the bubbles just won’t stop and none of the smooth wall bubble techniques seem to apply since I’m applying it over a textured wall with paint. If I start to sand the bubbles I often find that just more and more show up underneath and I have to wind up sanding it all the way down past the original paint to close to the original drywal surfacee.
Hi, I NEED HELP! Please comment. So we skim coat all of our walls and ended up with beautiful ultra smooth walls BUT when the painters came in, they prep and spray painted the whole house and when they where done the walls didn’t have that smooth finish they felt rough like a sand like feel. I don’t have a clue what happened in the process but they messed up the smooth finish. He doesn’t explain to me what went wrong I don’t know what to do.
Years ago I hung a drywall ceiling and skim coated it and it came out great. I’m a DIY guy so about 15 years later I’m about to start my second attempt to skim coat and I’ve learned a lot perusal your articles. BUT the big difference in the technique I used back then and yours is applied the mud with a notched trowel to get an even depth of mud and then used a knife to smooth it out. The smoothing was very easy because I was not guessing how deep the mud was on the ceiling. I just made it smooth and tried not to accumulate any extra mud on the knife. I finished with a quick sanding to knock down any knife marks. Have you ever tried using a notched trowel to apply the mud? I’m going back and forth trying to figure if I should use that again or the roller and would like to hear your opinion.