To clean your Mac laptop computer, use a soft, lint-free cloth and avoid using abrasive cloths, towels, or paper towels. Unplug all external power sources, devices, and cables, and keep liquids away from the product. Dust can accumulate in all corners of a MacBook Pro, significantly affecting cooling. To clean the inside, remove the bottom cover, inspect the inside, locate the fans, and gently blow out any dust.
There are two ways to clean your Mac: using cleaning apps (takes 1 to 7 minutes) and manually (takes 30 minutes or more). Remove the bottom cover, inspect the inside, locate the fans, and gently blow out any dust. If your MacBook is performing hotter than usual, the cooling fans and a microfiber or other soft lint-free cloth can be used to wipe down the MacBook.
Reinstall macOS and use Q-tips to individually clean the keys, while canned air is used to blow debris out of the keyboard and interior. Compressed air is used around the keys on the keyboard and vents, and short bursts of air are used for MacBooks® to clean vents without harming the fans on the inside.
To clean hard-to-remove smudges or fingerprints on the display or exterior of your Mac, use a cloth moistened with 70% isopropyl alcohol (IPA). Spray alcohol-based screen cleaner onto a thick microfiber cloth and wipe around the entire chassis and on the screen.
Physically disconnect power from the wall and move the computer to an outdoor area. Open it up, pull out the CPU tray, and use a duster to clean the inside of the laptop.
📹 How To Clean Inside Your MacBook Pro
WARNING: Don’t shake the can and ground yourself first. Follow Sam’s advice at your own risk. When it comes to easily cleaning …
Can I clean the inside of my Mac?
To clean your computer, unplug it, use a damp cloth to remove dust, be cautious with chemicals, and spray cleaner on a cloth to avoid moisture in ports. Use compressed air to clean keyboard keys and vents, and short bursts of air for MacBooks® to clean vents without harming fans. Identify and tidy up tangled cables to make it easier to swap out peripheral equipment. These tips will help optimize your Mac for faster work and play. For more information on dusting your computer, visit the provided resources.
How can I clean up my MacBook Pro and make it faster?
To optimize your Mac’s internal workings, follow this guide:
- Clean up your Mac’s internals by tidying up your start-up, un-used apps, downloads folder, storage disk, cache, resource-hungry programs, and trash.
- Install any patches, security updates, and application updates from Apple. These updates are crucial for maintaining computer security and delivering new features and enhancements. Software updates often streamline applications and are more efficient.
- Clean up your storage disk, cache, and remove resource-hungry programs.
- Remove any resource-hungry programs and trash.
- Keep your Mac in good working order to maximize its benefits. By following this guide, you can clear up space, optimize your Mac, and make it faster and more responsive.
Can I remove keys from my MacBook Pro?
To remove normal keys, use a thin, flat tool to push the prong out of its hole at the bottom-left corner. Pull the key down from the top-right corner and wiggle until the left side is detached. Lift the whole key up and to the right, and the key should come cleanly off with the picnic table attached. For function keys, use the tool for both prongs, with F6 (num lock) having the prongs on the right hand side.
Larger keys like Delete have a stabilising bar, so slide the tool flat at the right-hand edge of the key and run it up and across the top to the top-left corner. The prongs on the Delete key are on the top-right and top-left, and the bar on the bottom.
The Enter key has two picnic tables and a metal stabilising bar, so remove the bar by putting the tool in the top edge and running it clockwise down the right side. The prongs for the top picnic table are on the left hand side, while the lower key has four prongs instead of two prongs and a bar.
How to remove dust from a MacBook Pro keyboard?
To clean your MacBook keyboard, turn off the device, unplug it from power sources, and use a brush to remove dirt. After cleaning, wipe away any remaining dust with a clean cloth. While cleaning the keyboard is easy, users should be cautious as the keys are delicate. If compressed air is available, it would be much easier. Despite being designed to withstand dirt, accumulation of dirt over time can damage the keys and sensor. There are various ways to clean your MacBook keyboard, including:
- Wipe away any remaining dust with a clean cloth.
- Use a soft brush to remove dirt from the keyboard.
- Use a clean cloth to wipe away any remaining dust.
- Use a damp cloth to dry the keyboard.
What should I use to clean my Mac Pro screen?
In order to clean an Apple Pro Display XDR or iMac screen, it is recommended to use the cloth provided with the display or an alternative soft, dry cloth. In the event that further cleansing is required, the cloth should be moistened with water or a screen cleaner. It is imperative to refrain from allowing moisture to infiltrate the openings. In the case of nano-texture glass or standard glass screens, it is recommended to consult the Apple Support article on the cleaning of nano-texture glass on Apple displays.
Can I use alcohol wipes to clean my MacBook Pro screen?
To clean your Apple product, use a 70% isopropyl alcohol wipe, 75% ethyl alcohol wipe, or Clorox Disinfecting Wipes on hard, nonporous surfaces like the display, keyboard, or other exterior surfaces. Avoid using these products on Apple Vision Pro, bleach, hydrogen peroxide, moisture, and submerging in cleaning agents. Avoid using on fabric or leather surfaces. If liquid gets inside your product, seek help from an Apple Authorized Service Provider or Apple Store. Liquid damage is not covered under the Apple product warranty or AppleCare Protection Plans, but you may have rights under consumer law. Make a reservation at the Genius Bar at an Apple Store.
How do I clean my Mac body?
To clean hard-to-remove smudges or fingerprints on your Mac’s display or exterior, use a cloth moistened with 70% isopropyl alcohol (IPA) solution to gently wipe the display or enclosure. For MacBook Pro models from 2016 and later with Touch Bar and Touch ID, follow the same cleaning process as the display. Shut down the Mac, unplug the power adapter, and dampen a soft, lint-free cloth with water. For 13-inch Late 2009 and MacBook 13-inch Mid 2010 models, use a 3M Grey Microfibre or soft dye-free, lint-free cloth to clean the bottom case.
How do I clean a dirty MacBook Pro?
To clean your MacBook, MacBook Pro, or MacBook Air, first shut down the computer and unplug the power adapter. Use a damp, soft, lint-free cloth to clean the exterior, avoiding moisture in openings. Avoid using liquids or cleaning products containing hydrogen peroxide. To clean the screen, use a soft, lint-free cloth dampened with water. For hard-to-remove smudges or fingerprints, use a cloth moistened with a 70% isopropyl alcohol solution to gently wipe the display or enclosure.
How do I clean the inside of my Mac screen?
The interior of the glass should be cleaned with a dry cloth, after which it should be aligned with the frame and pressed against it. The glass should then be secured in place using an appropriate adhesive. The MacBook should then be reassembled in reverse order.
How do I run a clean on my MacBook Pro?
- Go to Apple’s System Settings > General Storage > Documents > Delete chosen files.
- Open Finder > Settings > Advanced > Remove items from the Trash after 30 days.
- Find and uninstall apps using the most CPU and memory.
- Install and open Spotless.
These steps will help your Mac run faster and perform better. However, they may not guarantee that your Mac will perform like mine, as it depends on your device and tasks. To clean up your Mac, install CleanMyMac X, click Scan, and run.
📹 How to clean dust from fans on Apple macbook pro inside
Hello everybody this is Abraham with no short computer services and what I have here is a MacBook Pro I believe it’s a 2013 it …
Apple Certified Technician here. I understand this was half satirical, half informational, but I wanted to share some advice to anyone perusal this. If you have an air compressor, or have a friend that has one, it’s a much safer bet. You aren’t running the risk of that liquid propellant getting into the logic board. Also, you run the risk of damaging the logic board and other delicate components by touching them without being properly grounded. See ESD for more information. I can really appreciate what you’re doing SAMTIME, but maybe chuck in some warnings so inexperienced DIY-ers don’t come crying to you when they wreck their expensive electronics.
Tech services are you real service or just guy trying to? Blowing air on fans and don’t hold them is not very wise decision also if you don’t pull out fans and clean those cooling grills and also repaste thermal compound there will be overheating agin very soon and not very happy customer with your work too.
How did temps go, any improvement? I had similar problem (though no where near as much dust), and things improved with a quick clean, but not sure entire fan blades managed to be cleared of dust. Macbook often gets over the 55C mark, so might need to pull fans apart and wipes each blade entirely. Cheers for vid.
For such thing a would use air spray instead of industrial air pressure kompressor than you can be sure the air it 100% clean. Sometimes there are also an oiler device combined with the compression (to maintain the compressor parts it make some oil drops every hour in the system) you have to be careful. Air spray is much safer and more convenient to use.