Painting Interior Molding?

Home improvement expert Ron Hazelton explains how to paint trim and molding, a crucial part of any room’s decor. He shares seven easy steps to make the process quick and easy. First, clean the trim, then prepare it by priming it, priming it, priming it, applying the first coat of paint in 2-3 foot sections, and finally, paint the trim.

To ensure a smooth finish, use a high-quality sash brush or a foam roller. Apply the paint in long, even strokes, avoiding overloading your brush. For a painted trim, place painter’s tape on the wall directly above the trim to prevent paint transfer and create a straight edge.

To prepare the area, remove or cover furniture near or around the trim. The paint should be applied using short, horizontal brush strokes, repeating the motion until a few feet of trim are covered in paint.

To ensure a long-lasting and visually appealing finish, take proper safety precautions, such as washing the trim, sanding it properly, priming it, filling any holes, and using a high-quality sash brush or foam roller.

What is the general rule for painting trim work?

It is recommended that, when painting trimwork and walls, the trim be painted first, two coats be applied, and the surface be allowed to dry before painting the walls. It is recommended that a different color be selected for the trim and that the same color be used consistently throughout.

What is the correct order to paint a room?

The process of decorating entails the initial application of paint to the ceiling, followed by the subsequent painting of walls. Subsequently, windows, doors, and skirting boards are painted. The concluding stages of the process pertain to the painting of windows, door frames, and skirting boards. The guide stipulates that a minimum of eight characters is required, at least one capital letter, and the inclusion of a special character or number.

Is it better to paint molding or walls first?

Painting trim before walls is generally recommended to protect wood and leave a pleasing shine. Using high-quality semi-gloss paint, paint the trim along the perimeter of the room with a 2 ½ in. angled brush, then use a ⅜” nap roller to paint the ceiling from one end to the other. If a second coat is needed, roll the paint in the opposite direction. It’s advisable to cut in one room at a time and roll out the wall while the cut-in paint is still wet to avoid a visible line. Paint along the edges of trim and baseboards and the entire ceiling perimeter.

How to paint interior trim?

1. Clean the trim with a damp sponge.
2. Dust off walls and ceiling to ensure good adhesion.
3. Apply primer to the trim, covering any bare wood and spackled areas. Allow it to dry for 24 hours.
4. Paint the trim with a color from Sherwin-Williams collections.
5. Clean the surface with a damp sponge, sanding it before wiping away any dust. This quick and easy process will make any room stand out.

Can you paint over trim without sanding?

Paint over wood trim without sanding it, as long as it’s clean and deglossed. If you’re satisfied with the current trim design, use the correct technique and paint it in any desired color. When selecting paint, consider type, sheen, color, and brand. Shinier paints are more durable and hold up better over time. Semigloss offers a classic look and is easily wipeable. Satin paint offers a contemporary look with a matte finish and is durable. Satin trim painting is a great option for those who prefer a more contemporary look.

What kind of paint do you use on interior trim?

The paint sheen used for interior trim affects the level of light reflected off the finish. The most common and best sheen is a satin or semi-gloss finish. Satin paints have a medium sheen and are durable and easy to clean, while semi-gloss paints have a higher sheen and stand out in a room. If you prefer a lower sheen or want to paint walls and trim the same color and sheen, use a satin paint finish. This is especially recommended for areas with imperfections in drywall. A full skim coat or “Level 5” finish can be done, but it can be expensive and not suitable for most applications.

Do you need to sand Moulding before painting?

Prior to the installation of molding, it is advisable to paint it, if feasible. To achieve this, the moulding should be lightly sanded with 220-grit sandpaper, vacuumed to remove any debris, and then wiped down with a clean, slightly damp cloth. This step is imperative, even in instances where the molding has already been installed prior to painting. In the event that the molding has already been installed, it is recommended to proceed to the subsequent section.

Is it better to paint trim with a brush or roller?

The choice between roller or brush for painting trim depends on the desired finish. For flat stock trim boards, a mini 4″ roller can be used for faster work, while a brush is more efficient for complex profile designs. Painting trim requires patience and practice, as it can be challenging to leave brushstrokes behind. However, a professional painter can achieve a smooth finish by learning the tricks of the trade.

A five-step process for painting trim involves careful preparation, painting the trim first, allowing the paint to overlap onto the wall by about a half inch. Wall paint can be cut up to the trim’s edge, but for decorative molding with a complex profile, it may be more efficient to paint the wall, let it dry, then tape it off and paint the trim later.

What do professionals use to paint trim?

The most durable paint for trim and baseboards is acrylic enamel or oil-based paint. Oil-based paints are smelly and hard to work with, while acrylic enamels like Insl-x are more expensive but harder to clean and durable. Insl-x Cabinet Coat has been a reliable choice for its ability to harden to a nice finish, resisting chipping, scuffing, food stains, grease, and water. It is available in a wide range of colors and two sheens, and has excellent flow and self-leveling properties. It can be dry to touch in 1 hour and can be recoat in 6 hours.

Should interior trim be gloss?

Trims, such as baseboards, mouldings, window frames, doors, and cabinets, require a durable paint finish due to frequent contact with bicycle tires, stroller wheels, and makeup-streaked hands. Semi-gloss paint is a great choice for these areas, as it is more durable and easier to clean. However, it also reveals more imperfections, making them stand out.

There is a standard sheen level range for paint finishes, with traditional semi-gloss paint ranging between 35-70. Clare’s Trim Paint, in the 40-50 range, offers a more subtle sheen, known as Subtle Semi-Gloss. This radiant sheen is perfect for high-touch surfaces and stands up to the toughest wear and tear.

Ceilings should be the first surface to be painted, as they can quickly transform the ambience of a space. A flat white paint finish is the best choice for ceilings, as it reduces glare from artificial lights and helps reflect natural light, making the room feel brighter and more open. Our Ceiling Paint offers the perfect flat white finish for ceilings, providing even coverage with minimal splatter and high hiding power to conceal surface imperfections and get the job done in fewer coats.

How to paint trim and not leave brush marks?

The process entails sanding with 220-grit sandpaper, the application of a second top coat, and the sanding with 220-grit sandpaper after each coat. This method ensures the paint is applied in a clean and free-flowing manner.