Is Ardex Feather Finish Exterior Adherent?

This 8-minute video demonstrates the process of mixing Ardex feather finish (Self-Drying, Cement-Based Underlayment) to create a smooth surface for floor covering installation. The product is castor wheel approved and can be applied with a steel trowel at a true feather edge or up to 3mm in thickness. It is suitable for patching, filling, and feather finishing minor surface damage to levelling and smoothing compounds, such as footprints and trowel marks.

ARDEX FEATHER FINISH is ideal for patching and smoothing minor surface damage to levelling and smoothing compounds, such as footprints and trowel marks. Floorcoverings can be installed after 15 minutes. Most ARDEX Levelling Compounds are not designed for external use, but ARDEX K 301 is ideal for resurfacing exterior concrete areas including domestic drives, paths, and garages.

ARDEX FEATHER FINISH is formulated from a blend of Portland cement and other hydraulic cements, providing a smooth, permanent finish. It is suitable for use over a wide range of substrates, including concrete, wood, and terrazzo. For high-moisture floor coverings and adhesives, this product can be installed over concrete with relative humidity levels up to 99.

In summary, Ardex feather finish is a self-drying, cement-based underlayment that provides a smooth surface for floor covering installation. It is suitable for use on various substrates and can be applied with a steel trowel for a smooth, permanent finish.

Can you use self Levelling cement outside?

The Tilemaster External Leveller is an excellent choice for outdoor and outdoor use self-levelling compound and paving grits. It is suitable for various outdoor applications, including patios, swimming pools, garage floors, driveways, concrete areas, play areas, barn floors, summer houses, balconies, and walkways. This fast-setting compound can be applied from 2mm – 50mm in one application, using a trowel or pump. It can be walked on and tiled after 3 hours, and is suitable for use as a finished wearing surface and swimming pools.

The fibre-reinforced compound is suitable for use over various external substrates, including concrete, sand/cement screeds, and power floated concrete. It remains workable for 20-30 minutes when mixed with water, making it suitable for both commercial and domestic use.

Can self leveler be used outside?

Self-leveling products are not recommended for interior applications, but concrete repair mortar like Topcem Premix or Mapecem 102 can be used. Topcem Premix is an accelerated-cure screed mortar suitable for both bonded and unbonded applications, offering easy screeding and sloped workability. Mapecem 102 is a one-component, shrinkage-compensated, polymer-modified, fast-setting cementitious mortar with a corrosion inhibitor and silica fume, suitable for renovation and other renovation projects.

What is ARDEX FEATHER FINISH used for?

Ardex Feather Finish® is a self-drying underlayment made from Portland cement and hydraulic cements, providing a smooth, permanent finish for various substrates before installing floor coverings like sheet vinyl and VCT. It offers exceptional bond strength, is easy to mix and apply, and can be mixed with water only. It offers superior coverage up to 300 sq. ft. per bag, is mold and mildew resistant, and can be installed in 15 minutes. The SystemOne ARDEX L. P. Standard Limited Warranty applies EMICODE, making it ideal for healthcare environments.

Can ardex be used outside?

ARDEX K 301 is an appropriate solution for resurfacing exterior concrete surfaces, such as domestic drives, paths, and garages. This is in contrast to the majority of other ARDEX levelling compounds, which are not designed for external use.

When should you not use self-leveling concrete?

Self-leveling concrete, a polymer-mixed product, is not suitable for use on non-horizontal surfaces, vertical walls, or areas with heavy machinery or harsh chemicals. It is also not suitable for floors with structural damage, as it only fixes the surface and may reoccur if the underlying floor orientation is in bad shape. Self-leveling concrete is also unsuitable for large-scale repairs due to its fast drying time and increased cost. A self-leveling concrete bag is more expensive than ordinary cement.

Can you use Ardex outside?

ARDEX K 301 is an appropriate solution for resurfacing exterior concrete surfaces, such as domestic drives, paths, and garages. This is in contrast to the majority of other ARDEX levelling compounds, which are not designed for external use.

Is there an outdoor self-leveling compound?

Outdoor self levelling compound is a reliable and easy-to-use solution for preparing substrates before laying tiles. It offers exceptional performance in various weather conditions. Industry-leading products like Ultra Floor Level IT and BAL Level Out are available, while Levelflex and Larsen SLC 2500 are ideal for flexibility and strength. These compounds transform outdoor areas, delivering a flawless, professional finish every time. For assistance, contact 01604 859800. Unfortunately, no products were found for your selection.

Can you use ardex feather finish outside?

ARDEX FEATHER FINISH® and ARDEX SD-P® are water-based cementitious toppings designed for the filling and repair of concrete surfaces. They are suitable for use in interior settings without the addition of latex or other additives.

Can you use LevelQuik outside?

The LevelQuik® RS is a flooring system designed to level interior and exterior floors prior to the installation of various types of flooring, including ceramic tile, natural stone, resilient flooring, carpet, wood, and parquet.