This video demonstrates how to remove and replace an exterior door lock set and an interior locking door. It provides step-by-step instructions for installing door handles and lock sets in home renovation projects. A new lockset is an easy upgrade, and a proper layout and sharp tools are essential for a successful installation.
To replace a common door lock, start by removing the two screws holding the deadbolt thumb turn onto the door. Remove the thumb turn and pull the deadbolt. This guide will show you how to install a door lock for your interior or exterior door, increasing home security and gaining peace of mind.
To install a handle or lockset for the exterior door, measure the area for the faceplate, drill holes for the handle and deadbolt, and chisel out the area for the faceplate. Drill pilot holes for the plate’s two screws with a 3/32-inch bit, reinsert the assembly, and screw it in place. Slide the outside knob with the spindle.
To change a door lock, first unscrew the knobs and take them off. Then, take the lock apart, remove the strike plate and latch, and install the new lock.
To install a door handle and lock, follow these steps: 1) Install the latch, 2) Install the outside handle, 3) Install the inside handle, and 4) Tap the latch into the mortise. Secure the latch with screws.
📹 How to Replace a Door Knob and Deadbolt Lock (Step By Step)
How to change and replace doorknob and deadbolt lock If you just moved or just want to replace your doorknob or deadbolt lock …
What type of lock should be used on exterior doors?
A deadbolt lock is an indispensable component for ensuring optimal security of any entry or exterior door in a residential setting. This type of lock is more secure than a bottom lock, which can be circumvented with the use of a credit card.
How to secure a front door from the outside?
To enhance your home’s security, consider the following tips:
Choose a solid core door. A solid core door is a strong and durable option that is fire-rated for extra protection. It has a thick center and is usually fire-rated for extra protection. These doors are highly resistant to force and will hold strong.
Replace the door frame. Install strike plates with long screws. Rekey or replace the lock. Reinforce the glass. Keep the entrance well-lit. Install a security system. Lock your front door.
Replace the door frame. Install strike plates with long screws. Rekey or replace the lock. Reinforce the glass. Keep your entrance well-lit. Install a security system. Lock your front door.
Keep your entrance well-lit. Install a security system to keep your home safe.
By following these tips, you can improve your home’s security and make your front door your first line of defense.
Do exterior doors need two locks?
A sturdy lock is sufficient for securing a front door, and if installed correctly, it is enough. Adding a second lock can provide additional protection, but there are other measures to consider. Quality in security goes beyond the number of locks. It is crucial to choose a well-made lock from a trustworthy manufacturer, rather than relying on cheap online options. This ensures that your front door and lock are secure and reliable.
Are door locks hard to install?
Installing a doorknob and lock doesn’t require a degree in engineering, as modern hardware is designed for quick and easy installation. To begin, gather tools and materials, including a few common items. Once you’ve shopped for your new set, follow these quick tips for installing a standard doorknob and lock. Once you’ve installed the hardware, you can enjoy the convenience and ease of the new doorknob and lock.
Can you put a lock on the outside of a door?
To create a temporary door lock, remove the door handle, install a deadbolt on the outside of the door, and force a sturdy wedge under the door. Doorstops aren’t as effective as inside doors, but they still hinder movement from the outside. Bend a fork into the latch using pliers or wire cutters to create a portable door lock. Bend a quarter of the fork’s prongs inwards to a 90-degree angle, cut half of the handle off, and fit the bent prongs into the door latch. Close the door, slide the handle between the prongs, and secure it in place.
How to lock door knob from outside?
To unlock a door, slide the key into the outer doorknob’s keyhole and turn it clockwise as far as possible. If the key doesn’t fit, flip it upside down and try again. The jagged ridges along the key’s length match the lock’s security. Close the door while standing outside and turn the key clockwise as far as possible. If the door locks, try turning it upside down. To remove the key, turn it counter-clockwise back to its original position and pull it out of the keyhole.
To unlock the door from the outside, slide the key into the keyhole and turn it counter-clockwise. If the doorknob doesn’t release, try flipping the key upside down and trying again. Remove the key from the lock.
How do you install a master lock on a door?
The hasp arm should be mounted to the door using a screwdriver in order to facilitate smooth operation.
How do you lock an outward door?
Outward-swinging doors are often used in warmer areas to let the outside in, making homes feel like vacation spots. However, they also present unique security risks compared to inward-swinging doors. They are more difficult to kick in than inward-swinging doors, but their exposed hinges make them vulnerable to criminals. Additionally, they have a larger hinge for criminals to use to pry the door open.
Outward-opening doors are sometimes used inside a home to separate interior spaces, but they don’t have space for a traditional lock. To secure these doors without a lock, there are several options, and you can even learn how to make a lock for your door using simple household items.
To secure your home, follow these steps: secure and reinforce the hinges, install a latch guard, use a door barricade, install a door security bar, tie the doorknob or handle to a heavy object or piece of furniture, and install a home security system. By following these steps, you can enjoy the benefits of outward-opening doors while maintaining your home’s safety.
Can you install a front door lock yourself?
This comprehensive guide provides detailed instructions for the installation of a mortice lock, regardless of whether the cylinder lock, mortice lock, or nightlatch is in use. With the appropriate tools and the correct instructions, one can swiftly and effectively alter a door lock, thereby ensuring the security of one’s residence or place of business. For further information, please refer to the Door Lock Buying Guide.
What are the two locks commonly used on an external front door?
This guide on exterior door locks and types focuses on the various types of locks available for doors, including deadbolt, mortise, cylinder locks, smart locks, deadbolt lock with reinforced strike plate, keyless entry smart lock, multi-point locking system, and sliding bolt lock. These locks are essential for protecting your home and your valuables, and choosing the right type of lock is crucial for ensuring the safety of your home and your belongings. Whether you’re a homeowner or a security enthusiast, this guide will help you lock down knowledge faster than a bolt is fired into place.
📹 Exterior Door Knob and Deadbolt Installation
Chapters 0:00 Intro 0:49 Remove Old Hardware 2:33 Overview of New Hardware 5:01 Installing New Strike Plates 8:42 Installing …
Thank you for this awesome article. The printed instructions are usually not clear. I had to change the deadbolt set when the lock on the knob was sticking and not working consistently. As a single woman I am happy and proud when I can do these things myself! Appreciate your article to help us get our projects done!
The knob/locking portion came off right away, but the old deadbolt where the key goes with the spoke that goes into the hole wouldn’t separate from the mechanism or the door. I think it’s just old and stuck and if I whack it with a hammer it should come out, but I was wondering if that sound right before I hit anything. Can someone help?
Why wouldn’t you explain the complications of when the inside door knob want just slide on and then the problem with lining the holes together. I wish I would have never saw this article and just paid someone to do it for me you made it look so easy like I could really do it but you didn’t explain everything
This is the second home in which youtube.com/post/Ugkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU we’ve replaced our “regular” doorbell with a Ring article doorbell and we really enjoy it. It is very easy to install and it works very well, with a clear picture through the app and good in-home use (we added the chime, which is also easy to install and doesn’t require another thought to use).
You should really revise this article to mention the importance of aligning your strike plate so the dead latch engages properly and that the dead bolt fully extends. If the dead bolt doesn’t fully extend and the dead latch isn’t PRESSED IN by the strike plate, they can simply be pushed in and totally bypassed. VERY EASY and detrimental mistakes.
A security upgrade that you could do is replacing the short wood screws in the hinges with 2 1/2 inch or 3 inch long screws. This gives a lot more strength to the door. I also do this for both strike plates on the door jam, when short screws are provided with the doorknob / deadbolt set. When doing this for the hinges, just replace one screw at a time. If there is a glass window on a door, I install security film on the glass on both sides. when the glass is struck, it just spiderwebs and is difficult to smash out. BTW … I would clean that filthy door before replacing the knob and deadbolt. That’s just my preference ha ha ha.
DEADBOLTS ARE ESSENTIAL FOR SAFETY! I locked myself out of my house and asked my neighbor if he could help me in any way. I did not have the deadbolt locked. He cut a piece of plastic from a 2 litre soda bottle, slid it into the slot between door and frame and slid it quickly down past the lock. My jaw hit the ground when I saw how quickly and easily my door flew open. Quite unnerving. Deadbolt installed the next day!
Great tip not to use a power screwdriver. I decided to leave the old hardware on the door jamb to avoid chiseling. Of course, the dead bolt cylinder has to line up with the old opening. Taking your time is key. Don’t start the job an hour before you and the wife are leaving for dinner reservations. Thanks for a great visual to watch right before you start the job.
Because the front door has a window, easily broken, and an arm can go in and turn the deadbolt and door handle knob, the deadbolt lock should be a double-key deadbolt lock. The original lock was missing a screw. I would surmise that any locksmith would have provided an appropriate screw. A two dollar repair part for what you presented for much more expense. If a door has no window, the inside deadbolt knob you presented is OK. On the otherhand, if the existing deadbold mechanism (the part inside the door that goes into the door jam) is defective, that too, can be replaced. I am a homeowner, not a locksmith, and I would do the repair attempt first, and then the replacement. By the way, the way you did the replacement is well done.
Another good article Scott! Big tip! When tightening the screws to the lockset, or the dead bolt, use a #1 Phillips. I’ve put in a ton of these and I’ve found the #1 to work better. I even saw where your screwdriver slipped off the screw in your article Scott. I don’t know why, it just works. Try it, you’ll see, of course, YMMV. Stay safe and Healthy! 👍👍👍😁✌🏻🇺🇸
For anyone having an issue with their door latch or deadbolt, property maintenance or DYiers, there is a new solution that replaces Glue, Sticks, Putty, or that ugly metal sleeve that goes over your door. ReSecure Latch sits INSIDE the door bore hole, alongside the latch, and the supplied screws thread into it. Works with many of the top brands like Kwikset, Defiant, Yale, and others. After perusal the many articles Funny Carpenter has on DYi repairs, come check out how it works. Hopefully one day to have in inside box stores like Depot and Lowes. Reply
When you screwed on the handle plate, the knob was deflecting the screwdriver, making it awkward to engage the screw heads directly straight on. There is a risk that the screwdriver will slip off and damage the finish of the faceplate, and also rub against the handle itself, marking it. Were you working with a brand where the knob itself cannot be removed? It’s also a reason for not using a power drill as you did on the top lock at 10:18. I notice that when testing the handle at 13:13 the handle turns in both directions. My builder just fitted a new Schlage regent combi entrance set to a new door. The knobs will turn only in one direction – towards the strike plate. This is of course inconvenient. Could he have fitted it incorrectly, or is that the way it’s designed?
So i watched and older article of yours and was wondering if you could tell me what type of screwdriver that is you were using to tighten the screws on the outlets. Also you were talking about how there is no “right” way to install an outlet with the ground up or ground down, well im not sure if its a actual code or not but I was told by an older electrician that you always want to install an outlet with the ground facing up so if you have a cord plugged in and it gets stepped on or ran over etc. etc. then it wont break off the ground terminal on your cord that you have plugged into the outlet. thanks.
NEVER use a phillips-head screw for anything! No wonder you have trouble with stripping heads: phillips heads are INTENTIONALLY DESIGNED to cam out. This was a useful thing for a decade or two, nearly a century ago, on production lines, before better alternatives were invented, and also were the first thing to market that lacked the slot’s tendency to slide out the side of the screw head, but we’ve had much better options since before most of the people here’s parent’s were born. STOP buying them! Every time you buy a phillips-head screw, not only are you screwing yourself over, but you’re also delaying the process of other, better options increasing in availability, which screws over people like me who often need the less common options that are harder to find non-phillips versions of.