This article provides a step-by-step guide on how to paint vinyl shutters with a brush. The process involves using a brush or roller depending on the size and style of the shutters, with a brush providing more control and precision. For larger shutters, a roller may be faster.
To paint shutters, start by painting the edges and corners of each shutter using a brush for better coverage and ensuring no areas are left unpainted. Apply the paint evenly, taking time to do so.
In the beginning, pour thoroughly mixed paint into a bucket and dip a quality 2″-2½” wide nylon/polyester brush into the paint. Use a good primer, a good Purdy brush, and a 3″ hand roller if needed for smaller spaces like shutters. Paint the louvers first with a 1/2- or 1-inch trim brush, then the frame with a 2-inch brush. Leave the shutter edges until last so you can periodically apply the paint.
When applying latex or oil-based house paint with a brush, fill gaps in the shutters. When the paint dries in-between these gaps, your shutter will no longer operate. Start with the backside of the shutters using a high-quality nylon polyester paintbrush and paint following the grain of the wood, working in thin, even coats.
When painting plantation shutters, use a brush or a small roller to reach all areas, especially the slats. Apply paint in thin, even coats, as the shutters are viewed from a distance and brushing won’t waste paint like spraying.
📹 How to paint your shutters – DIY Shutters
Www.diyshutters.co Painting our DIY Shutter kits is super easy. We recommend using your standard enamel spray paint found at …
Is it better to spray or brush paint shutters?
To paint shutters, spray them with canned spray paint or an airless power sprayer. However, if spraying is not possible, a brush can be used for a quality finish. Clean and scrape the shutters, then hang them from an open ceiling joist in the garage or stand them upright or lay them out on the floor. Keep the brush on the dry side to avoid runs, drips, and sticking problems. Paint the window side first to avoid missed runs. This method ensures a clean and visually appealing finish.
What is the best thing to paint shutters with?
When purchasing or painting plastic shutters, it’s crucial to follow the manufacturer’s guidelines for proper care. Some shutters may require primering or a specific type of paint. Most require high-quality, 100 acrylic paint. Darker colors can cause warping and ripple, so it’s best to consult the manufacturer’s guidelines or an exterior paint professional. Older shutters need thorough cleaning and usually require a primer before painting.
Always go with a primer when in doubt. When selecting a color, consider that the shutters typically match the color of the outside of the inside door, creating harmony in the house’s exterior color scheme.
Should you paint shutters with a brush or roller?
After completing the prep work, apply two coats of 100 acrylic exterior latex paint using a brush and roller. If painting a louvered shutter, consider renting an airless paint sprayer to get paint into cracks and crevices. Decorative shutters, made of vinyl or plastic, are meant for decoration and not functional parts of your home. Masking off the surrounding siding around them can help avoid removing them during repainting. However, vinyl shutters may not be suitable for repainting due to potential issues. It is essential to consider the specific type of shutter you have before repainting.
Can I paint my shutters without taking them down?
Painting shutters while they remain affixed to the residence can result in cost savings by circumventing labor costs, the potential for damage during transportation or storage, and the necessity for supplementary paint for touch-ups. Furthermore, this approach saves time by eliminating the necessity of removing each shutter, transporting them to an external location for painting, and subsequently returning them to the residence for installation.
What is the best way to paint indoor window shutters?
To paint shutters, use a water-based primer and spray paint in one direction to avoid drips and create a smooth finish. Open louvers at a 45-degree angle and spray in one continuous vertical motion. Repeat this step for the other side and tilt rod. Allow the primer to dry fully before applying the spray paint. Allow the shutters to dry completely before rehanging them and replacing all hardware and knobs. This process ensures a smooth finish and prevents drips.
How do you paint interior wood shutters with a brush?
Utilize a brush to apply paint to the shutter slats, commencing at the uppermost point and employing a lighter stroke to circumvent the introduction of unintended brushstrokes. Subsequently, the side edge of the shutter, where it meets the house body, should be painted, commencing at the top corner.
Should shutters be painted flat or gloss?
Gloss or semi-gloss paints are commonly used for trim and shutters, as they highlight details and can be used to emphasize shutters. Gutters, downspouts, and other elements should be painted similar colors to the siding to help them blend into the house. Shutters and window sashes are typically the darkest colors in the color scheme, helping them stand out and frame windows. It is crucial to choose the right paint for the surface, such as oil-based paint, as it bonds better to tin gutters.
Spring is a great time for exterior painting, as most paint won’t dry below 50 degrees, making it a pleasant day to be outside. When choosing color variations for trim, follow a simple rule: use darker colors toward the first floor and lighter ones towards the top of the house. If you need help picking colors or are unsure about the process, contact a professional for a consultation.
What kind of paint is best for shutters?
When purchasing or painting plastic shutters, it’s crucial to follow the manufacturer’s guidelines for proper care. Some shutters may require primering or a specific type of paint. Most require high-quality, 100 acrylic paint. Darker colors can cause warping and ripple, so it’s best to consult the manufacturer’s guidelines or an exterior paint professional. Older shutters need thorough cleaning and usually require a primer before painting.
Always go with a primer when in doubt. When selecting a color, consider that the shutters typically match the color of the outside of the inside door, creating harmony in the house’s exterior color scheme.
📹 how to paint vinyl shutters brushing vs. spraying how to DIY
Just an idea on how i did it.. thanks for watching.
Been a painter for over 30 years your conclusion for oil primer was spot on and between spray or brush both will work but I would put 2 thin coats on either method also looked like an hvlp sprayer you used if you had an airless thinning would not be required. Side note emulsa bond works great for addhearing to slippery/glossy surfaces like vinyl siding/shutters. If I wanted to I could cover those shutters in 1 coat with a brush it’s just a pain you have to keep your brush at the right angle every stroke as to not peal off paint but float it and it takes much longer. They look great tho your hired.
Spraying really kicks ass on louvered doors. Couple years ago I was going to repaint some louvered closet doors in my house that were already white, and I just tried a can of rust oleum white in a spray can and it worked awesome. Just gotta do it outside and let it dry before you bring it in. Your door looks great! Are you going to clear coat it?? hahaha
A person I have done work for before wants 22 shutters painted. I assume I will take them down but could leave them up as well. How many hours per shutter do you think this will take…. taking down, cleaning, scuffing up a bit, priming, painting, and putting them back up? Plus, she has the cost of the supplies. I am not sure I want this job. It might be better for her to buy new shutters which I can easily measure and replace.
Good article but to me it is too much headache brushing or pressure spraying the paint. I used the Rust-Oleum Universal Satin Black Spray Paint and Primer In One. The can is about $9 and I pained the face of two windows shuuters and still /2 full. Neat spraying not like the regupar paint spray can. Smooth spray. * Universal spray paint is a paint and primer in one that provides rust prevention, superior coverage and durability on any surface * Provides long lasting protection on interior/exterior surfaces including metal, wood, plastic, wicker and aluminum * Oil-based formula provides a durable protective coating with excellent resistance to abrasion, fading, chipping and dulling.
Wash with 30 Second Mold & Mildew Cleaner. Prime with SMART PRIME by Zinsser Rust-o-leum to brush on (or) spray. Unless you just buy PPG Pitt-Tech and apply 2 coats. California ALFLOR also another good direct vinyl acrylic paint choice 2 coats. As for spray options, Krylon Fusion is a quality top coat direct to plastic / vinyl product @ around $5 a can.
This was a great article. I suck at painting but have some paint projects I’m working on now. They’re all going badly. Was trying to paint some book shelves with that fake wood stuff. Textured like your shutters here. I bought an expensive primer that “sticks to anything”. That did not work at all for me. It was peeling easily like your first tests no matter how long I waited. Needs to be able to take books going in and out. Today I tried to paint some closet doors that look like your shutters here, but made of real wood. Used a brush. Well that was a mistake. Looks so bad. I hope the second coat with a spray paint will save it somewhat. But you did a great job with your project. Yeah on the article I can’t tell them apart. I know cameras can’t capture stuff like it is in real life.
Outstanding, I learned a lot about painting the vinyl shutters. I have the very same project and wanted to check out my painter. Because of your article, I now know the questions to ask. Will also go with that 2 coats since these shutters sit in the North Carolina afternoon sun. Has faded these shutters twice before. We thought it was because we used a dark burgundy color? What do you think? Thanks
Hey Chris, do you have any social media accounts you have some what daily post on. Like a ChrisCraft Facebook page, instagram, or snapchat ? Started perusal your articles while restoring my ride and got hooked on how great of a teacher you are. Would like to see more from you and wish you the best of luck brother!
Nice article, however……I noticed the Kilz spray can was labeled “interior” ……but I have found the Kilz exterior spray oil based product. Because most people don’t have a fancy sprayer system I would be interested in seeing how Krylon type spray cans would work on shutters. Yes I realize you are using a ( odd ) color paint, but if using a normal color off the shelf what kind of end result a person would get, I hate the thought of me hand brushing my 14 shutters.
Chris- Finding your article blew me away. I am repainting my 20 year old plastic shutters, exact size and manufacturer as yours, and using the same color/paint manufacturer as yours! The existing shutters were previously painted and were just cleaned and repainted. However I’m adding 4 new ones and I knew I needed to do more than just paint them. This article has saved me HOURS of experimentation. Only difference is I use a HVLP gun with a large tip for latex paints. Really spits out a lot of lightly thinned paint. Believe it or not… I will also be painting our front door the same color. Very well made article, thanks.