How Much Room Does An Inside Window Blind System Require?

This guide provides a step-by-step process for measuring inside-mount window blinds. Accurate measurements are crucial for a flawless fit and ensure that the factory makes your blind or shade to the exact measurements you provide. It is important to allow extra space for the head rail and mounting. Each type of blind is measured and mounted differently, so it is essential to follow these steps.

For inside-mounted blinds, measure the depth of the window frame to ensure there is enough space for the blinds to fit. Measure from the front of the window, first measuring the length of the glass, and if there is raised molding around the glass, measure from the inside of the molding to the outer edge. Add at least two or three inches to the length of the window.

Inside mount blinds provide a clean look for window treatments and can be installed inside the window frame. To measure inside mount blinds and shades, measure the width of the window horizontally in three places to the nearest 1/8 inch: top, middle, and bottom. A minimum of ¾” of window depth is required for installation brackets.

For 2-inch wood and metal blinds, a 2 ¾-inch depth is needed, while 2-inch faux wood blinds require a 2 ¾-inch depth. For 2″ horizontal blinds, such as faux wood blinds and wood blinds, a minimum of 1.5″ inches is required, and 3″ for a flush mount. Honeycomb shades require less space.

Depth is crucial when choosing inside mount blinds and shades as it determines the window treatment types and style options that will fit properly.

How much space do you need for inside mount blinds?

Inside mount blinds require a minimum of ¾” of window depth for bracket installation. If the depth is larger than ¾”, the blinds can be installed inside the window frame. If the depth is less than ¾”, they must be mounted outside the window frame to secure the brackets. A shallow depth results in unsecure blinds at high risk of falling. Outside mount blinds are mounted outside the window frame, providing a taller, more dramatic appearance.

There is no minimum depth for outside mount blinds as they are not mounted within the window frame. The shade fabric should be 1 3/4″ narrower than the measurement provided for brackets. If the material needs to cover a specific width, add 1 3/4″ to the desired fabric width.

How much room is needed for inside mount blinds?

Inside mount blinds are installed inside the window frame, providing a clean built-in look. The minimum depth for non-flush blinds is ¾ inches, while for a flush look, it is 3 inches. Solar and blackout shade fabric is approximately 1 ⅜ inches narrower than the ordering width to compensate for brackets and ensure proper function. If light gaps are a concern, consider outside mount or add side channels to eliminate light seepage. Inside mount blinds require a minimum of ¾” of window depth for bracket installation.

If the depth is larger than ¾”, blinds can still be installed inside the window frame. If the depth is less than ¾”, they must be mounted outside the window frame to secure the brackets. Outside mount blinds are mounted outside the window frame, providing a taller, more dramatic appearance. There is no minimum depth for outside mount blinds since they are not mounted within the window frame.

How much clearance do you need for perfect fit blinds?

In order to guarantee an optimal fit for the frame, it is advised that a clearance of a minimum of 25mm be maintained between the perimeter of the glass pane and any potential obstructions, such as handles and air vents.

How much clearance do you need for blinds?

In order to ascertain the optimal dimensions for the window, it is necessary to measure its width and height. In addition, an allowance of three inches should be made for the control of light and the maintenance of privacy. Extending the blinds outside the window will provide the necessary space for mounting, thereby creating the impression of a larger window and enhancing its overall appearance.

How to do an inside mount for window blinds?

It is recommended that the brackets be secured with small screws, which may result in a reduction of power if they are fixed into a recess. At this point, the permit should be pushed onto the brackets, thereby completing the installation process.

What is the rule of thumb for blinds?

To measure blinds length in an outside-mount application, determine the desired height above the window frame. A good rule of thumb is to go two to three inches above the window frame. Measure from that point down to the bottom edge of the windowsill and round to the nearest 1/8-inch. For an inside-mount application, take three measurements for length, as no window is completely square. Measure at the left side, in the center, and at the right side of the window. This will ensure your blinds fit correctly and create a more spacious feel.

How much should I subtract for inside mount blinds?

To measure the length of your window, measure the inside of the window frame in three places: the left side, middle, and right side. If you don’t want your blinds to rest on the windowsill, deduct a ¼ inch from the final number. Measure the point where you want the blinds to hang lower if your window doesn’t have a sill. Measure the depth of your window by measuring the upper window casing, as some blinds have minimum mounting requirements.

How should inside mount blinds fit?

Inside mount blinds should be installed 1/2″ to 1″ from the window frame’s edge, while flush mount blinds should be installed 2″ to 3″ from the frame’s edge. The distance from the frame depends on the size of the blinds, with smaller blinds typically installed 1/2″ to 1″ and larger ones 2″ to 3″. To install flush mount blinds, precise measurements of the inside window dimensions are required, and the blind is installed completely within the window frame.

How far into recess to fit blinds?

Three blinds are suitable for recessed fitted windows, provided the recess is at least 7. 5cm. Measure wall to wall and top to bottom in the alcove when fitting. Advantages include easy color retention, decorative items placement on the window sill, and creative expression. Disadvantages include creating an illusion of height and requiring an exact fitting for a blackout effect. Decorative items can be placed on the window sill, and the blinds can be adjusted to create a unique look. However, exact fittings may not provide the desired blackout effect.

How much space is needed for inside mount blinds?

The minimum depth required for inside mount blinds is 3/4 of an inch.

How much smaller should blinds be than the window inside mount per?

In order to ensure an optimal fit, inside-mounted blinds should be sized 1/4 to 3/8 inch smaller than the narrowest width measurement. Additionally, if the intention is to prevent the blinds from resting on the window sill, they should be sized ¼ inch smaller than the length of the window frame.