The Home Depot offers free repair help for a variety of appliances, including washing machines, dishwashers, and microwave installations. They use local, licensed, and background-checked technicians who can repair all makes and models of heating and cooling systems. However, they do not repair washing machines in-house but partner with other companies for repairs.
The Home Depot can also help diagnose and fix pressure washer issues, such as bad gas or blocked nozzles. They can repair a wide range of gas-powered tools and equipment, including mowers, trimmers, blowers, hedge trimmers, pressure washers, chain saws, lawn mowers, small engines, and more.
As of 01/20/2022, Home Depot is no longer accepting any Ryobi equipment for repairs and is experiencing closures of their repair centers. They have been selling, repairing, and replacing pressure washers, pressure washer pumps, and accessories since before Home Depot and Lowe’s were what they are. If you have a problem with your pressure washer while it is under warranty, home improvement centers will refer you to a different company.
Home Depot offers free shipping on qualified repair or replace outdoor power equipment products or buy online and pick up in-store. They service all types of machines and equipment, excluding throw away big box pressure washers. If you have a Home Depot $99 special that breaks, throw it away.
Repairs completed in 14 business days on eligible tools and batteries are available.
📹 Husky (Home Depot) 1500 pressure washer repair
I show how I repaired my old Husky (Home Depot) 1500 psi Electric pressure washer (power washer). I replaced a leaky pressure …
Can Karcher pressure washers be repaired?
Kärcher offers free repair services for devices from the Home and Garden range within their warranty period. The company uses specially trained service engineers with repair stations for each product group and a full stock of replacement parts on-site. Each machine undergoes a multi-point test and safety inspection in accordance with BGV A3. Kärcher’s approved repairs are carried out by trained technicians to the highest standards.
Does Home Depot fix tools?
While Home Depot stores do accept tool repair projects, it should be noted that not all have the ability to repair tools on-site. If a tool is taken to a store with a tool rental center, the repair process will take approximately two to three weeks. However, if the store does not have a tool rental center, the tool will be shipped to an offsite location, which will prolong the repair time to four to six weeks.
Why are pressure washers bad?
Power washing is a powerful method for removing dirt, mold, and mildew from your home’s exterior, but it can also cause damage if not done correctly. High pressure and heat can strip paint, damage siding, or harm the structure of your home. It’s crucial to use the right settings and techniques, or hire a professional with safety equipment. Pressure washing, on the other hand, can remove dirt and grime from your vehicle but should be used with a lower PSI setting and a wide spray nozzle, keeping the nozzle at least a foot away from the surface.
How do I get my pressure washer to work again?
To ensure a proper functioning of your electric washer, ensure that your garden hose and pressure hose are not kinked, leaking, or blocked. Turn on the water full-force and supply the correct amount of water as outlined in the owner’s manual. Remove the water inlet filter and check the trigger gun and nozzles for debris. If the washer still fluctuates from high to low pressure, it may be due to air trapped in the pump. To re-prime the pump, turn off the machine, disconnect the high-pressure water hose and trigger gun, and allow water to run through the pump for 20-30 seconds.
Turn off the water, reconnect the pressure hose and trigger gun, and try using the machine again. Low pressure in electric machines often indicates a leak in the lines or case, causing the machine to run harder or more often than it should.
Can I exchange a broken tool at Home Depot?
The Home Depot allows most merchandise to be returned within 90 days with proof of purchase, unless otherwise specified. However, the store may decline returns if the product is damaged by the customer or to prevent fraud or abuse. If the purchase was made with a Home Depot Credit Card, Pro Xtra Credit Card, or Commercial Account, 365 days from the date of purchase are allowed for a full refund. Perennials, trees, roses, and shrubs have a 1-year guarantee and can be returned for store credit.
What is the most common cause of a pressure washer going faulty?
Leaks in a pressure washer can cause inefficient operation and damage to the machine. Common leak points include hose connections, seals, and the pump itself. Tighten all connections and replace damaged seals or hoses. If the pump is leaking, professional servicing may be required. For replacement parts and professional servicing, visit Hotsy of Virginia. If the pressure washer won’t start, check for adequate fuel, oil level, and spark plug condition.
If these are in order, the problem could lie with the carburetor or ignition system. Cleaning the carburetor and replacing a defective spark plug can solve starting issues. Pulsating pressure is typically caused by air in the pump or an inconsistent water supply. Run the machine without the nozzle attached and ensure stable and uninterrupted water supply. Contact Hotsy of Virginia for pump inspection and repair services.
How do you fix a pressure washer that loses pressure?
The unloader valve is a crucial part of a pressure washer, diverting water from the pump to the bypass when the pressure washer is not spraying. If you notice a drop in water pressure, check the nozzles for wear or tear. If they are okay, adjust the unloader valve to increase pressure. Adjust the valve in small increments, testing the pressure between each adjustment. Ensure the washer is running and the spray is activated while making the adjustments.
Avoid making the water pressure too high to avoid damaging the unloader valve and other internal components. If you cannot identify the cause of the low-pressure issue, take your pressure washer to a local Husqvarna dealer for repair.
What is the average life of a pressure washer?
Homeowners typically use pressure washers for less than 50 hours per year, with a machine rated for 500 hours lasting up to 10 years if properly maintained. For job use, a machine rated for 2, 000 hours or more is recommended. A 13 HP petrol pressure washer is faster and lasts longer than a small electric unit. Plan for future attachments and ensure the pressure washer has enough power to support them. If you have any questions, feel free to contact us via phone or email.
Why did power washer stop working?
Pressure washers are susceptible to malfunctioning due to a multitude of factors, including engine-related issues caused by the accumulation of old fuel, low water pressure resulting from clogs, kinks, or hose complications, and the presence of leaks, which may indicate damage or the deterioration of valves. In the event of an engine malfunction, it is possible that the carburetor may be clogged, which would result in low water pressure due to the presence of clogs, kinks, or hose issues.
What is the most common problem with pressure washers?
The most common pressure washer problem is a loss of pressure, which can be caused by leaving the trigger off for an extended period, allowing bypass water to get too hot. To assess a malfunction, customers should check for proper inlet flow/volume, proper electrical service, and unrestricted flow on the pressure side. Technicians should always do a complete visual and operational inspection of the machine before working on any unit.
This helps diagnose problems or determine where to start. Simple things to look for include low psi, no burn, water supply, and won’t run. By taking a few minutes to fully inspect the unit, technicians can diagnose and determine the problem’s location.
Is it worth repairing a power washer?
A pressure washer pump can be fixed, often addressing common issues like worn-out seals, damaged valves, or clogged inlet screens. These problems can be addressed through repairs, saving the cost of purchasing a new pump. However, deciding whether to rebuild a pressure washer pump depends on several factors. First, assess the extent of the damage, as minor damage can be repaired. Second, consider the pump’s age, as relatively new pumps may be worth investing in replacement parts instead of a new pump.
Finally, weigh the cost of replacement parts against the cost of a new pump. If expensive replacement parts are available, a new pump may be more cost-effective. For high-quality pumps used in an industrial setting, rebuilding can be a cost-effective and efficient solution. Proper maintenance is crucial for extending the pump’s lifespan and ensuring optimal performance.
📹 Sun Joe Pressure Washer Repair – Won’t Turn on and Spray
My Sun Joe pressure washer turned on for about 15 seconds then wouldn’t spray or start again. Here is how I fixed it. My Amazon …
I’ve probably got a dozen of these machines (mostly the full size) and I’ve learned the extreme importance of keeping a screen filter in the inlet and the second thing is to keep the pump from freezing in the winter with water in it. The screen is of utmost importance to keep those check valves working.
I fix pressure washers for a living and right away I saw that your pump had a lot of chlorine/calcium buildup in it and it could be the reason why the pump isn’t stopping when you release the trigger. You should’ve taken ALL the CHECK VALVES OUT and cleaned the inside of the pump completely with CLR cleaner or some other mild acid. Good article but NOT REALLY helpful!! I may post a article of how I fixed a customers Husky 1550 power washer once.
I know this is old but I need some help. I have a husky 1750. The thing worked great.. One day out of curiosity, I changed the wand to a second wand that came with it. I put it back together, no pressure.. Hmm.. I take it back apart, put the original wand back on,still no pressure. If I press the trigger with the machine on, I get a light stream of water, absolutley no pressure. Any ideas?
Thanks for the article! taking the time to watch it made me think about how it was surging, those checks are dirty letting the high pressure bleed back to the low pressure garden hose side the valve you replaced that has the arm on it is the motor shut off for when the wand valve slams closed it will need adjusting.
mine is actually leaking oil, coming out the bottom somewhere (yes it’s electric). not profusely but i can see a little slick on the water. started doing it last year but still (kind of) worked. hooked it up last weekend to spray out the garage floor. now it’s tripping the circuit too. p.s. the automatic shutoff stopped working on mine too not long after i bought it.
Next time clean out the die cast casing which has developed internal water corrosion. I use steel wool twisted around a nail and inserted into the casing with a drill. Its not so aggressive and cleans it well. Step 2 -Silicone grease, used by plumbers to lubricate single handle faucet valves! Put it back together and your only out the cost of the grease
i bought one of these new back betweeb 2002 and 2005 Im guessing . I just pulled it out of storage and its still sealed in its orig box as i never used it. How did that replacement parts workout. Was it easier/cheaper to replace as you did or would you have replaced it with newer and higher pressure. This clip was back in 2015 and youthought it was 8 yrs old then. Youve probably replaced or repaired again? Did you get higher pressure? is more pressure significantly better?
Don’t know if you will see this, but I have a Husky 1650, and the clear plastic tube that attaches after the pump, just before the pressure-side outlet (to the spay hose) has broken the fitting where it attaches to the tank on the side (by the wheels). I cannot find anything anywhere about what this does nor whether the machine can be run without it. I clamped the clear plastic hose shut, hooked up the water and turned the unit on – it tripped the GFCI immediately. Any idea what that clear plastic tube connects and how to fix it?
you are awesome! my electric pressure washer stopped working after two hours of cleaning. This is my third year with it. I tried the manufacturer but no longer exists. was about to throw it out and buy a new one when i thought of you tube! the first helper i watched took the whole thing apart and found the problem. so there i went! all those screws!! put it back together and still didn’t work. was really discouraged, about to give up and decided to try one more helper–YOU!! am so happy i found you. changed the nozzle and it works!! saved me $$$ and gave me such a boost! I am a 74 yr old woman who keeps up her own house and love learning to fix things. you tube has made such a difference!!
Thanks! You just saved me a week’s headache and the prospect of “sending it out for repair!” Your article was spot on, and the explanation and demonstration was great. Turns out my rusted nozzle was the issue. That’s the problem with these non-constant systems. The use back-pressure to determine if you’re squeezing the handle and there’s back pressure they don’t run the pump until it’s alleviated. A clogged has nozzle appears the same to the pump. That’s not really that big of a deal because running a pump motor against a static water load isn’t going to compress the water (at normal temperatures) and will just overheat the motor.
So glad I found your article. Same problem and I would not have thought the issue could be a rusted nozzle. Thank you! I still have an issue with some leaking at the hose connection and/or connector to stem on unit, even after replacing the original plastic connector with a brass one. If you happen to have a suggestion for that I would be very interested.
My man my Sun Joe wasn’t working today,, not only did you help me but I put away the sun joe for the winter with the same nozzle you did. After perusal your article and went back outside and looked at the nozzle same as your and rusted like yours, pulled that nozzle off and it fired right up … I was getting ready to send you a check for $10,000 but I felt in my heart you would rather have a like and Sub.
I literally messaged with an agent tonight and they said it was just broken. Turned out that when I removed the nozzle, the metal piece stayed on and I hadn’t noticed. I watched your article, double checked, noticed the metal piece and that it was in fact rusted like yours, removed it, and the unit started working again. Thank you for saving me a few hundred on a new one!
You saved me a lot of time and money. I watched your walkthrough and figured out the challenge was exactly as you determined. I can’t believe stainless steel was not used but that aside amazing knowledge was passed on to others. Best part about the internet. You made the world a better place. Thanks!
Same Problem. Somehow it worked. What I happened to do after perusal vid.: 1. The night before: Plugged into working GFCI outlet unit would not turn on. 2. Took a small shop repurposed hair dryer to check house GFCI to ensure it was working. 3. Sprayed prongs with contact cleaner. 4. Tried to power up unit, no go. 5. Next morning: Detached all hoses and used garden hose to clean them out and also water inlet and outlet to/on the unit. After the fact, should have but didn’t think of it cleaning the water inlet filter. 6. Unit would not turn on. 7. Took a break for 30 minutes. Started looking on Amazon for a unit replacement GFCI. 8. Went outside, plugged unit into short shop extension cord (3-Prong) as I had done the night before. The red light came on the power washer plug. I didn’t even press the Reset or Test. The unit turned on. Ok great. 9. Detached the short shop extension cord (instead of getting on my knees, I had it in my deck box for my Bluetooth speaker) and then plugged directly into GFCI wall outlet. 10. The unit turned on and then I began to power wash. 11. After power washing turned off unit then turned it back on again to placate me. It turned on. Thanks for the article. I’m not sure how these units were engineered and the relationship of cleaning out the hoses and in-out water parts in relation to the units GFCI plug, but I believe your article helped me out. Thanks very much.
This is phenomenal info. I tried to use my Sun Joe today and it turned on, and immediately shut off. I took off the nozzle tip to see that it was completely rusted over. Switched out the tip and it’s working like a charm. Now to soak the rusted one in vinegar. Thanks so much this article is a lifesaver
Thank you so much!! I was very frustrated because I only used the machine for one year, but I forgot to remove the nozzle and it got rust. I had no idea that could be the problem. I clean a little bit with WD-40 to remove the rust and it finally came out, then I put the nozzle in white vinegar and it had a lot of black particles inside. As soon as I cleaned everything it worked right away!! Thanks!!
Unfortunately, this didn’t work for me. I was using my pressure washer for about 2 hours. I stopped to take a break and it no longer worked. No clogged hose or rusty tip. The water runs through the hose just fine, it just won’t turn on. Sigh. I guess I’ll be buying a new one. I have had this one since 2018, so I guess I got my money’s worth.
Damn! I wish I would have seen this before I bought a new GFCI plug. After the new plug didn’t fix the problem, I unscrewed the hose from the washer, pressed the trigger on the gun to let out any pressure, and voila, it worked! My next step was to buy a new pressure washer. At least this article saved me from making that mistake! Thanks!
Well, my washer came on for about 2 minutes, then it stopped. I did the reset on the plug-in, and also made sure there was power on the line. All good. I tried to restart the sun joe, but no sound no lights! as we say in France…. I did use it a week ago, and all was working. For one week, it just sat in the storage, disconnected from water, of course, and waited for me to return. And now, it won’t turn on. It is not clogged, that is certain. Any other ideas? Thanks!
I bought one and worked for maybe 2 hours then quit. I have checked everything evidently the GFCI plug seems to be the issue..Had to order it no one here sells it. If that does not work I trash it and move forward to a better more quality pressure washer. Just researching issues on youtube my page is filled up with links. If it were a good product there would not be all these articles showing you how to fix it.
Let me tell you how you just helped me…..I swear I’m smart. I am visiting my mom. I told her I’d wash the boat and dock. I have a gas washer. She has electric. The motor kept shutting off. Yeah……because it’s electric. I spent 30 minutes tracing power issues. About to take it apart and check for a short. I watched the article and realized “oh yeah….it’s electric. Only runs when the trigger is pulled. So not the intent of you article but still helped. Haha.
This was very helpful, thank you. The troubleshooting guide in the owner’s manual mentions nothing about this. It says to change the fuse, and then doesn’t say how to do that. I came here looking for just that when I came across this article. I changed the nozzle and, voila! It worked. I had left a nozzle on over the winter and it rusted over. Only problem is… there was so much pressure built up in the hose that when I released the nozzle it shot off like a bullet and I never found it! Good thing I had the good sense to point it away from me… I definitely could’ve lost an eye! Thanks again.
I’d been experiencing the strange and frustrating pulsating after the unit was away for the winter, and t nj ought something was really wrong with mine. Soaked the nozzle in vinegar for about 10 minutes and Q-tipped it; also poked it from the inside with the sharp end of a corn holder. All’s perfect now. THANK YOU for posting this; you’ve done us a great service.
excellent info. the thing worked great, cleaned my house, walkways, the business, and was totally satisfied with the performance and the price. then i pulled it out and it did what you described, i was thinking, cheap stuff made to last one season! then you showed up under sunjoe pressure washer troubleshooting. it was money! soaking the tips. thanks.
I have the exact same unit, the exact same nozzle, and the exact same story about putting it away working but now broken. Would only run for a second or two. I watched this article, thought no way I have some kind of thermal fuse / electrical problem, However 100% this was the fix! You were right.Thank you!
So I had the same problem… two days ago. Funny, but your article was the first that popped up when I googled but I was convinced that mine was an electrical problem. Mucho elbow grease scrubbing the deck that had three years of moss, and a call to Sun Joe (who diagnosed that it was the leaking hose attachment and couldn’t wait to get off the phone!) later to troubleshoot and my frustration built. I watched article after article and finally watched your article again because it kept popping up. I still thought it wasn’t “your” issue but walked through your very clear and thorough steps. It was indeed that very issue!!!!! Thanks so very much for this post as I so was not looking forward to buying a new pressure washer, especially as I’d only used mine twice!
Thank you so much.! You are brilliant. Ours quit and after buying 2 new pressures hoses, we were considering buying a new pressure washer. I then turned to YouTube. I found your article and went out and took off the nozzle and low and behold all gunk all came out of the wand. We turned it on and low and behold….fixed. We will put all of our nozzles in vinegar to clean. Thank you so much.
That is interesting. Your pressure washer turns on when there is demand for water. Most older units have a bypass valve that recirculates the high pressure water and maybe some pumps bring the pump pistons to a neutral state. That makes sense as it should save some electricity even though starting currents are higher than running currents. Full watch and a thumbs up!
Like most everyone commenting, you saved my butt! I dragged my power washer a few hundred miles to help a relative and it wouldn’t work. I was so frustrated and then I found this article. Just like you said, the nozzle was clogged. Problem solved- my aunt thanks you for getting her deck cleaned up for spring!
Thank you for posting this! I went to the Sun Joy website and the troubleshooting all involved electrical. I was convinced something was wrong with the plug. I replaced it and it still wouldn’t work. I then looked on YouTube and found your article. The crusty nozzle was the problem. No where on the website did it say if it will not turn on, it might be too much pressure. It instructed me to check the fuse, whatever that meant. It doesn’t have a fuse.
OK, I unplugged the output hose and water and soap shot out. Didn’t work. Disconnected the trigger and put water through it. That’s ok. The tube looks clear. All the tips look good. Connected the water to the washer with just the output hose. Water came through fine.Put everything back together using a different tip and turned it on. Yeah, it turned on….until I turned the water back on and pulled the trigger. It died again within about 5 seconds. Any other thoughts? I’ll put all the tips in vinegar to see if that helps.
Hi Rob! I’ve got one of those and it has served me well, too. One oddity is the reset button on the plug. Right out of the box, that has always acted strangely, but only on startup. About 50% of the time, I have to hit the button after plugging it in (regardless of whether there’s water pressure or not). No rhyme or reason that I can see….just a quirk! BTW, I finally got my 2M base antenna situation squared away! Now, it’s on to erecting an OCF dipole for HF! 🙂 73 W1NLJ
Well, now you’re my favorite person in the world, at least for the moment anyway. I, too, took my Sun Joe XPS 4000 out of winter storage, plugged it into power and heard it come on for the 1/2 second I bumped the trigger. So, great!! It survived several months storage in oceanfront salt air environment of the Outer Banks that destroys anything and everything containing metal. Hooked up the water hose, turned on water and…… nothing. Motor would not start. The only Google answers I could find indicated that I had apparently destroyed the motor and or pump in that 1/2 second bump. So, finding no other answers and in exasperation that the machine had only lasted less than one year, I was resigned to having to buy a replacement…… and with time pressure to get one in hand as well. Then I remember that there are often geniuses on YouTube, and in no time found you. My problem was exactly what you had discovered, a rust sealed nozzle. Thank you very much from a new subscriber. Logical, clear, thinking article, with no excess nonsense. Very nice.