Packaging tape grade refers to the construction of the tape, with varying levels of film and adhesive thickness. These grades deliver a range of different holding powers and tensile strengths. For lower tape grades, thinner backings are used. 3M adhesives are available in liquids, pastes, tapes, films, and shaped solids, each with characteristics to consider for application effectiveness and efficiency.
Scotch Exterior Surface Weatherproof Painter’s Tape is perfect for outdoor painting projects that can handle wind, rain, humidity, and direct sunlight. Different from standard 3M paper painter’s tape, Scotch Exterior Surface Weatherproof Painter’s Tape has physical properties and available sizes. Weathermate™ Construction Tape is made to create a tight bond on sheathing board and housewrap surfaces. Cross-linking PVA Glue is a type III exterior adhesive perfect for porous materials where extreme water resistance is required.
Exterior Gypsum Sheathing is a specialized performance panel consisting of a noncombustible, moisture-resistant core wrapped in glass mat facers on both the front and back surfaces and long edges. High-tack exterior grade cloth tape is designed to adhere to rough surfaces like brick and render, ideal for external surfaces. S470 is an exterior grade PVC joining tape, offering clean lines and easy unwind with no residue.
Scotch® Exterior Surface Painter’s Tape was developed for outdoor painting projects that need a tape that can handle wind, rain, humidity, and direct sunlight. The premium polyethylene film coated with a high-performance weather-resistant solvent acrylic adhesive is a powerful double-sided tape that holds up to 15 pounds and is weather-resistant for permanent mounting.
📹 Which Double-Sided Mounting Tape is Best? 3M VHB vs, Duck, Gorilla, Gorilla Clear, T-REX, Loctite
Double-sided mounting tape tested: LLPT, 3M VHB, Duck, Gorilla, Gorilla Clear, T-REX, Loctite, XFasten, and FixPro. Most brands …
What is the classification of tape?
The classification of adhesive tape can be divided into three main categories: substrate, application, and market percentage. Substrate refers to the material on which the tape is applied, such as BOPP, duct, or Kraft paper. Application encompasses the specific uses for which the tape is intended, including warning tapes, carpet tapes, and electrical tapes. Market percentage represents the proportion of the total tape market that is accounted for by ordinary tapes and special adhesive tapes. The applications of these tapes include, but are not limited to, warning tapes, carpet tapes, electrical tapes, protective film paper adhesive tape, wrapping film tape, sealing tape, and module tape.
Is normal tape waterproof?
Waterproof tapes are composed of backing materials coated with a robust adhesive, such as rubber or vinyl. These tapes are designed to prevent the loss of adhesive in wet applications, rendering them suitable for a multitude of applications.
Can 3M tape withstand rain?
3M™ ALL WEATHER Duct Tape is a weather-resistant duct tape that is capable of withstanding extreme conditions, including high temperatures, low temperatures, and precipitation, without exhibiting any signs of deterioration, such as peeling or cracking. The product is ideal for weatherproofing, patching outdoor equipment, and reinforcing tools. It conforms to any surface and allows for quick and easy application through hand tears. This duct tape provides a reliable hold in all weather conditions.
What are the types of tape?
PVC insulation tape is an adhesive electrical tape used for electrical phasing and wiring work. It is suitable for outdoor applications and can function in temperatures as low as -45°C. PVC insulation tape is available in various colors for differentiating between wires and is available in mixed color packs and non-adhesive options. Masking tape, also known as painters’ tape, is ideal for painting and decorating and is available in two roll lengths (25m and 50m) and four widths (19mm, 25mm, 38mm, 50mm).
It is manufactured from thin, easy-to-tear paper and is sometimes referred to as painters’ tape. The selection of tapes available today can be overwhelming, making it difficult to choose the right one for your needs.
What tape to use for exterior painting?
Scotch Exterior Surface Painter’s Tape is a waterproof, outdoor/indoor painter’s tape suitable for rain, wind, and sun. There are various specialty painter’s tape products available, with no universal best tape. The choice depends on the specific project and needs. Blue painter’s tape is recommended for protection, while green painter’s tape offers extra protection. White and yellow painter’s tape are also suitable. Some important considerations when using painter’s tape include the brand, its usage, and FAQs.
What tape works best outside?
Duct tape is a robust adhesive suitable for use in all weather conditions, whereas PVC electrical tape, composed of premium-grade plasticized PVC film, is suitable for outdoor applications. The primary use of this material is by electricians for the application of protective jackets to cables, wires, labels, and the execution of repairs. This renders it suitable for use in all weather conditions.
What types of tape are waterproof?
Tape Jungle offers a wide range of waterproof tapes, including duct tape, electrical tapes, gaffer tapes, Teflon tapes, silicone tapes, non-slip surface tapes, marine tapes, and reflective conspicuity tapes. These tapes are suitable for various projects and repairs, from creating weatherproof seals on equipment at work to stocking up on duct tape for home use. They are highly durable and can withstand harsh elements such as high heat, cold, and pressure.
Waterproof tapes are made from a combination of manufacturing processes, adhesives, and the material of the tape itself. Many are made of vinyl or polyethylene, which are highly durable and can withstand the elements. Industrial grade rubber- or acrylic-based adhesives provide extra security, ensuring the seal won’t dissolve or lose stickiness due to moisture exposure.
The reasons behind making a tape waterproof are not a one-size-fits-all solution, but rather based on various factors. By choosing the right waterproof tape for your needs, you can ensure safety and visibility in the workplace.
What is contractor grade tape for?
Scotch® Contractor Grade Masking Tape is a high-adhesive, one-day clean removal tape suitable for non-damageable surfaces such as vinyl, carpet, and wood. The tape adheres to surfaces for up to three days and can be removed without leaving any residual adhesive. The product is ideal for use on vinyl, carpet, metal, and plastic, and provides the necessary protection for job completion.
How long does 3M tape last outside?
The study demonstrates that 3M™ Extreme Sealing Tapes can withstand UV radiation for a period of 3-5 years when subjected to high levels of UV intensity and for a period of 4-9 years when exposed to mild UV intensity, provided that the tapes are applied correctly.
What are the different grades of tape measure?
Class I and Class II tape measures are based on their accuracy and margin of error. Class I tape measures have the smallest window of error, with an error margin of 1. 1 mm over a 10 m length. Class II tape measures have a margin of error around 2. 3 mm over 10 m. The difference in accuracy between the two is influenced by the situation and professional opinion. Most people opt for the more accurate tape measurer to ensure accurate calculations. Class II tape measures still provide accurate measurements suitable for construction work and other tasks, while class I tapes are suitable for those working in fields with higher detail.
📹 Scotch Rough Surface Painter’s Tape Review
Designed for use on concrete, brick, stucco, and rough wood 5-day clean removal leaves behind no damage or sticky residue …
Thank you for suggesting this article idea and please let me know which brands you’d like tested in the next round. Thanks, Todd Products Tested In This article (in no particular order): XFasten: amzn.to/32cdEWU Duck: amzn.to/3j2cMLb LLPT: Currently Unavailable Loctite: amzn.to/3l9s3f6 T-REX: amzn.to/31l2iRo Gorilla: amzn.to/2CPqy4D
I need to mount something under my headlight and it’s metal and the headlight material is plastic… for some reason I was hoping you made a article on double sided tape…. and here we are. So glad you do these! You are one of the few people on YouTube that puts the time in and gives a non biased results. I love it! You rock!
Here’s a very important variable you left out…. heat. I used the 30lb Gorilla Glue on an LED light strip in my garage (under a cabinet). The tape ran the entire 6 foot length of light strip. The light strip maybe weighed 5lbs total and was only an inch wide. It held great over the winter but in the summer when the garage reached a temperature of about 25 degrees celsius to 30 degrees celsius the tape let go. Pretty important factor given my application was well within the expected uses of this product.
I’d love to see a revisit to this, taking higher heat into account, such as a car interior. Looking for some replacement tape for my quad lock wireless charging mount after the included tape (I thought it was supposed to be 3M VHB) gave loose after just a few months, as soon as the heat started picking up.
I’ve tried TONS of different double sided tape as I’m a truck driver, and double sided tape is what I use to attach dashcam mounts to the windshield. The only 2 that haven’t failed is the clear 3M, and the black 3M. Some last longer than others but nothing lasted more than 3 months except for the two mentioned. Which outlasted the windshields. Same process each time. Cleaned both mount and windshield with acetone. As such those two are the same ones that have been holding gopro mounts on my truck, and on my racecar.
Bought the LLPT tape after perusal this test. Great adhesion at first but the stickiness completely died within two weeks. I used the tape to adhere a flat wooden plaque to a flat wooden desk. In two weeks the plaque just fell off and the residual tape film had no stickiness to it at all. It was as if the glue in the film was absorbed into the wood. Failed miserably. Amazon refunded without question.
I’d really like to see 3M VHB tape with primer tested on glass and aluminum. The 3M primer really does make a massive difference, without the primer it might barely stick to a surface but after priming it’s almost impossible to remove! I work in construction as a glazier and use it all the time so it’d be cool to see some testing done with it.
Great review overall. The information is good for my purposes. I have a small issue with the testing or maybe it’s just another test category to consider because it all depends on how you are going to use the product. I noticed on the vertical pull tests, especially on the metal, that the two pieces always separated away from the bottom. With that in mind, “how does it apply to reality?” … I say to myself. An object stuck to a wall will most always separate from the top first because of gravity pulling down, and you would need to rely on the tape to support both the total weight of the object as it pulls outward but that will be greatly diminished by how much surface area of tape it needs to slide downwards on. This brings me to the important test, that is related and I would have wanted to see … The test where the two surfaces slide apart parallel from each other, rather than tear away from each other. Using your metal vertical pull test as sn example, I would like to see a perfect pull vertically without separation first from the bottom. This means that the cable needs to be perfectly centered and perhaps add a slightly loose wedge both sides (like a track) to keep the pieces in parallel to the track. My prediction would be that the tapes strength will be very much higher for all across the board. Thanks again. Geat review.
Hello, I wanted to comment on how incredibly helpful your article was to my Philips Hue Lightstrip mounting project. I can’t drill the mounting brackets into metal and really needed something sticky to hold up multiple lightstrips. The 3M tape absolutely did the trick despite all my worries. Your research saved me a ton of time and money and this article should get more traction for people doing mounting projects. THANK YOU!
I’ve just re-watched this and I have some observations and a request: 1. The VHB tape was very consistent across the tests. On the metal tests, it failed in the way that it should according to my knowledge of the VHB technology. 2. The wood test failures were largely the fact that the adhesives had not bonded to the wood – they failed mostly from surface contact. The wood at the lumber yards is handled after being machined and the surfaces are not ideal for bonding. They often have traces of oils and other materials. Likewise, the end cuts from the circular saw have strands of fibers at various lengths that are not good for bonding. The Chinesium tape appears to have done better in this test largely because I believe it has more solvent than the other tapes based on appearance. I would suggest sanding the bonding areas with 120 grit sandpaper to clean and smooth them. After sanding, wipe with acetone or denatured alcohol to remove the sanding fines and allow to dry. Then bond and apply a 10lb/5kg weight or other clamping force and then test. If my assumptions are correct, doing this with the VHB tape will produce a much better result that can be indicative without rerunning the entire testing batch. VHB is used to bond the glass window assemblies’ aluminum frames to the steel structure where it handles the thermal expansion differences between the two. Amazing stuff. I use it on many things – just not wood.
I think some of the tensile strength tests were affected by the blocks tilting as they were pulled apart. Because each block only had a single pin, they could swivel a bit, turning some of the tensile force into shearing. Maybe using two pins per block would keep the tape line more level for future tensile tests. Anyway, this is a great article as always! Your articles have informed a number of my recent purchasing decisions. Since discovering your website, I always check if you’ve tested whatever I’m looking to buy. One thing I’d love to see you test or review would be torque wrenches! I have one that is rated from 20–100 ft.-lbs, but I need one that can do 10–15 ft.-lbs for car repair stuff. I hear horror stories about torque wrenches being wildly out of calibration leading to snapped bolts and damaged engine blocks.
Ooh. Before even perusal, I wonder if we’ll find out which ones are suitable for high Temps as well as temperature swings! Edit: looks like we didn’t see anything about temperature, maybe we’ll get a follow up testing how these do in an application such as hanging a decoration on a front door. The glass storm door can trap heat and then you have a swing in temperature swing once the sun sets, as well as testing how winter temperatures affect these. Great article as always though!
Interesting. I have 3M moulding tape from my local auto parrs store, and I use it for anything that I need a strong two-sided tape for. It is strong. It is interesting if it is a repackaged version of the one you tested. Good work. Appreciate the effort you out into these. Awesome. Just know that You are making a difference is separating the wheat from the chaff for us in all these products out there.
Surprising how much the wood tests varied sometimes by 1 sample being nearly twice as much as another from the same roll.Can only assume its down to varying grain patterns/moisture content etc in each tape’s 3 test pieces. Prob only the metal tests should be used as a comparison being much more consistent…..great review as always
There is two different 3M’s I am told, industrial and commercial. Maybe look into that? Also now you need to remove all that tape have to tested adhesive removers like Goo Gone, Goof Off and my favorite Rapid Remover? When they don’t work then there are those erasers that mount on the end of your drill.
I used TSSART Double Sided Woodworking Tape to stick together two pieces of wood to made side of a wooden school bus toy for my niece and it worked exceptionally well. Not having used such tape before and thinking weak adhesion used a couple of 4 in strips (width of tape = 2 in). Did it hold, liked to never got them separated. Cost is 0.16 $/ft
I use 2 sided tape to Attach Hutches to desks, basically to prevent them from sliding off, when the bond is too much, it delaminates the desk and destroys it. Other uses are trim pieces that I never to disassemble. so even the lowest performers have their places on certain job. So beneficial to know which is the strongest and weakest. Thanks!!!
My Application: Re-mounting Window Vent Visors on Car It’d be useful to know how well they hold up at temperature extremes (both 🔥hot🔥 & ❄️cold❄️). I first noticed the mounting tape on my car began to fail after sitting out in the sun on a very hot day. Another failed over the winter, as I was brushing snow off the car. One other variable to consider in the future: Ensure the exact same amount of force is used when “firmly holding surfaces” together. Maybe use a heavy object on top to press them together or rearrange your scale to hold compression at a set amount of lbs/newtons/etc.
I always go 3M. It’s like they have a skunk works for adhesives. In some of these tests they may not have come out on top, but what you cant test here, is how long does the adhesive last? 3M I trust will last for years if applied correctly. Some of these others may dry out and peel up in a month or two for all we know. I’ve seen it happen with cheap velcro tape vs the real deal.
For mounting wireless cameras, it would have been cool to see how well these tapes held to brick (although tensile strength might be hard with brick due to cracking and breaking). Now, with wireless products and a lot of people renting, looking for mounting solutions that are not restricted like drilling or taking a chance at cracking brick are needed. I have even started seeing people using double stick weather proof mounting tape attached to 3M INDUSTRIAL grade velcro (strong hold for light cameras, weatherproof but still removable, although theft could be a concern.) Cure time could also make a big difference, maybe letting bonds sit 72 hrs first before testing would have been more real world. Still, a BRILLIANT, THOROUGH, PRACTICAL and Non-Biased review ! I sincerely hope you make solid money on the Youtube algorithm payout so you can continue to make great content rich articles for the public !
WOW LLPT! That out of that way, thank you for this article. What an amazingly THOROUGH, yet no-frills, ‘just he facts, ma’am’, article. Nice. I wondered whether double-sided tape will hold up a full-sized wall mural without looking terrible. Not sure about the looking terrible part, but think I found which one would hold it up best.
I will say that Gorilla’s tape sticks well under water. I used it to tape magnets to a smooth plastic fish finder transducer. I magnetically attach a transducer to the bottom of my kayak. I tried to remove the magnets from the transducer after a season of being under water and the manets just didnt want to come off. They broke as I tried to pry them off. The Gorilla hold up great under water. My only gripe is getting double stick tape to stick to the very smooth and slick surfaces of my kayak. Nothing seems to hold to that . Just peels right off no matter how well I clean it with degreaser and rubbing alcohol.
Thanks for putting together this comparison test. I’m looking for something to mount “no trespassing” signs on my company property, and it looks like I have a variety of mounting tapes to choose from, but my only concern is how these will hold up in winter weather when we get below zero temperatures.
Thanks, this is another great one! One of my biggest challenges now is finding a semi permanent double sided tape that will hold a lightweight dash cam camera to the windshield. I continuously experiment and I have not had any luck. Would you please consider doing an update to include connecting Devices to a windshield?
could you redo this same article but test how they perform in freeze/thaw cycle, and when do they fail holding a standard weight, especially when the back is exposed to UV and heat? Reasoning: a windshield mounted weight exposes the tape to sheer forces over a wide temperature range (0F in winter and 200F +UV in summer
Can you please suggest a good double sided tape for my basement concrete wall? I want to stick adhesive hooks on that double sided tape to fix my projector screen. I was told that adhesive hooks will fall off after 3 months when directly sticked to the concrete wall. Your thoughts and recommendations will really help.
I would giving this a try and use a vice to smash the 2 pieces to gather to get a maximin contact meshing and see if you get a different result also let them sit for a day sounds weard but the bond is beter. I have multiple times I used immense pressure on the 2 different contact surfaces this caused a near-permanent bond! and I use the 3M Scotch 1 in. x 11.1 yds. Permanent Double Sided Extreme Mounting Tape 30LBS per 1 X 1 inch and it is pretty permanent Id say a hole roled could probably lift a car. And this stuff just at home depot lol I usually mess up what is put it on when trying to remove it. But This is a very good article I thuroly enjoy your break downs and test. I would be more than happy to buy you a role of this tape I use to test for your self.
Well, based on this I bought a roll of LLPT about 16 months ago…and have regretted it ever since. First of all, it is absolutely terrible for sticking things to a wall, unless the wall is very smooth and very hard…your metal to metal test was NOT a good representation of anything less than “very smooth surfaces”. Then there is the mess it leaves…very difficult to remove it when you take something down, as it then is always splitting down the foam media, and you have to spend a lot of time getting the sticky black foam off both sides. I want a tape that will stay cohesive, not something that makes me clean off a mess from both sides. 16 months later: The things that I did manage to get this stuff to work on have failed over time, one after another. And the mess in getting this stuff off of the remaining side is unbelievable: Desolv-it, alcohol, and TONS of labor! I threw out the remaining roll of this crap…DO NOT BUY IT!!!!!!
Hi projectfarm. I just wanted you to know that i really appreciate everything you uploading. I am so happy that you have no sponsor that i watch every ad to the end to give you the more money you deserve. Well, this is my way to help, in the moment that i can donate you’ll be the first that gets the donation. Really appreciate and love your hard work, please never stop!!!
I tried Gorilla extra strong double sided tape to mount a small bake controller, and it fell off the next morning, same thing with the 3M tape, just fell off what a waste of money. I then went to Harbor freight and bought their cheap double sided tape and its been a whole week and it’s still holding good. Don’t pay top dollar for the name brand tape.
Thanks again for another great article. Not surprised the 3m was better on metal. I use that stuff by the yard at work and it never fails to impress. They make at least a dozen formulations based on temperature and material to be bonded. McMaster has them all. Oh, and if you’re needing to bond wood with tape… no, you’re not. That’s a lab construct. lol
Larry in FL 1.0 out of 5 stars WORST DOUBLE SIDED TAPE EVER!!!!!! Reviewed in the United States on November 27, 2019 Size: 1 Inch x 50 FtVerified Purchase I ran across this stuff on a tape comparison on the YouTube website “Project Farm” (a GREAT website!), and took a chance. This turned out to be a massive mistake! The stuff will NOT stick to anything that is not perfectly smooth (think metal and glass); totally useless on, for example, walls. Bu the real issue is that when it does stick, and then subsequently fail (and it ALWAYS fails!), then the remaining side is impossible to get off without the foam core splitting and leaving a huge mess on the surface. Expect to spend 5+ minutes with Desolv-It, alcohol and scrapers (fingernails for delicate surfaces!) trying to get this crap off! I threw out the entire roll. A complete waste of money!
Your shear strength test is a failure because your device pivots causing a lateral motion at the bottom which introduces a tensile stress. In order for it to be a true shear test, the forces must be purely perpendicular to the test subject, which is not happening here. This is a constructive criticism, as I value and respect your work. Wes Baumguardner, B.S. Construction Science, Texas A&M University, College Station, TX.
OK,OK. Let me decipher all your fancy speak and jive talk. I’m trying to understand this…🤦♂️ So you are telling us that LLP Double sided tape is the answer to catching a bigfoot👽? Nice! Now in your professional opinion, what tape should I use to catch a Dogman🐺 ( werewolf type creature, AKA Anubis like thing, upright walking canine, or as referred to by US Forest “A bear attack wink,wink””).💊🤩 “N” I was just kidding about the jive talk.
Keep up the great articles…I seem to need stuff lately that PF has done a test. Again, though, I have issue with the test methodology, focusing on brand versus tape type, just like your test focusing on brand of duct tape instead of comparing same or nearly similar duct tape types (e.g. 17mil to 17mil rather than 17mil vs 5mil). In particular 3M VHB. As you noted about some of the tapes not performing as well on porous wood material, 3M VHB is not intended for porous wood. If you are using porous wood, then it needs to be sealed for 3M VHB to work properly. 3M VHB also needs the surfaces to be prepared correctly, cleaning with 50:50 mix of isopropyl alcohol and water before applying the tape (and/or using primer depending on which VHB). Wrong application and preparation are two reasons why people end up believing 3M VHB isn’t good tape. The stuff literally is like a weld when used/applied correctly.
Im looking to hang a 120″ projection screen frame (approx 9′ x 5′) weighing in at about 35lbs. The wall is plaster over concrete. The mount kit contains 4 wall mounting brackets. A bracket will be positioned 6″ down from each side of the top of the screen frame and 6″ up from each side of the bottom of the frame. Which Tape would you suggest would be best for this solution. Thanks.
I purchased the LLPT tape brand and it works great. However, it fails under extreme conditions. If too hot, the adhesive strength literally goes down to zero. It cannot be used above a certain temperature. I’d like to see a follow up test to see how these tapes perform under hot and cold conditions. Would be nice to see how these tapes hold up if used for exterior applications.
I watched this because I’ve been seeing people who have used VHB tape to mount solar panels to their van or RV and I’d like to do the same thing instead of drilling holes in my roof. It seems like LLPT is the better one to go with for my needs. Would that be accurate? I’m no Rosey the Riveter…just a feminine woman who wants to put my solar panels on my van home roof. 💯
You do a great test and thanks.Just a hint for a better outcome. Metal surfaces should not be grinded for a better mechanical strength but definitely should be clean with alcohol and dried. Also the environment to be applied should be considered. By default metal including aluminum are not completely smooth even when appear to be. I had the opportunity to make same test with 3M VHB 305 and other similar brands you presented. LLP waoo. Cheap and good!
Want to stick a piece of tread plate to the front of my camper with this double sided tape. Which do you think I should get for this application. I may also use sheet metal screws I. The corners just for piece of mind. What should I use that I should be able to find locally. Gorilla Double sided tape or something else?