The average household in the United States consumes approximately 893 kWh per month, or 30 kWh per day, depending on factors such as size, regional climate, and energy efficiency. Ultra-efficient homes combine state-of-the-art construction, appliances, and lighting with commercially available renewable energy systems like solar water heating and solar electricity. The average U.S. household consumes about 10,500 kilowatthours (kWh) of electricity per year, but electricity use varies widely across regions due to increased time spent at home and activities that consume energy.
Recent energy-efficiency facts and statistics show that with climate change becoming more of a concern, the demand for sustainable homes has increased in recent years. An assessment can help determine how much energy your home uses, where it is inefficient, and which problem areas and fixes you should prioritize to save energy and improve the comfort of your home.
Typical home energy improvements can result in a better building by identifying areas for improvement and implementing recommended measures from a home energy evaluation. Factors influencing the number of kWh a house uses include the size of the household, regional climate, and energy efficiency. On average, a household consumes around 800 to 1,000 kWh of electricity per month, totaling approximately 9,600 to 12,000 kWh annually.
Renovating a house costs per square or cubic meter, and the Buildings Performance Institute Europe considers minor renovations as 0-30 of final energy consumption.
📹 5 Tips for Electricians working in Residential Remodels
Service electricians and remodel construction electricians often go hand-in-hand. It is crucial to know and understand how …
How much electricity does a 3 bedroom house use per day in the UK?
The average daily electricity usage for different house sizes is crucial for energy cost calculations. Low-flat or 1-bedroom houses have an average usage of 4. 93kWh per day, medium-sized houses have an average usage of 2. 74%, and high-sized homes have an average usage of 11. 78kWh per day. Understanding these utility averages helps compare usage to historical averages and the UK average, making energy cost calculations more meaningful.
What cost the most when renovating a house?
The average cost of home renovation projects in 2021 was $18, 000, with the highest spending among recent homebuyers ($30, 000). The median national spend was $18, 000, with the 90th percentile being $100, 000. The highest renovation spend was among short-term homeowners ($19, 000) and long-term homeowners ($15, 000). HomeAdvisor found most renovation costs to fall between $17, 947 and $78, 308, with a national average of $48, 049.
A 2022 study by the National Association of Home Builders found that buyers of new homes spend an average of $12, 000 on renovations, $5, 000 on furnishings, and $4, 000 on appliances within the first year of ownership.
How much does it cost to renovate a house in the Netherlands?
A house renovation cost can be calculated in two ways: total price for a project or per square meter. On average, the cost is between 750 and 1500 euros per square meter. The cost depends on factors such as the quality and condition of the home. The main components that determine the cost of a home renovation include electricity, which may not meet current requirements in old houses. Installing solar panels or smart home facilities may require new circuits, which may require permission from the municipality. This can cost up to 10, 000 euros.
Heating is another significant cost, but modern facilities like a new boiler and radiators can save money on the energy bill. An HR boiler pays for itself, especially if the heating is outdated. Smart home extensions, such as smart radiators, can also help reduce energy consumption. By using a self-learning system, energy consumption is kept to a minimum, resulting in costs above 10, 000 euros for renovating your home.
Is 40 kWh per day a lot?
The average electricity usage for a 3, 000+ square foot home is over 42 kWh per day, which is twice the average usage of homes less than 1, 000 square feet. The median home size in the US is 2, 000 square feet, with an average of 30-33 kWh per day. While 40 kWh per day is higher than the average household consumption of 29 kWh, it is normal for homes with 3, 000+ square feet and five or more members, especially in the South.
What is the most expensive thing when renovating a house?
The kitchen, bathroom, basement, and other entertainment areas are the most expensive parts of a home remodel. These areas can transform a living space into a more functional and aesthetically pleasing environment, but they also require significant financial investment. Understanding which parts of a remodel are the most expensive can help homeowners plan and budget more effectively. Structural changes and repairs, particularly those involving the foundation, are one of the most costly aspects of a remodel. Repairing or reinforcing a foundation and removing or altering load-bearing walls requires professional expertise and can significantly increase costs.
How much electric power does a house use?
The Energy Information Administration (EIA) reports that the average American home uses 10, 791 kilowatt-hours (kWh) of electricity per year, or 29, 130 watt-hours per day. This can be divided by 24 hours to get an average of 1, 214 watts (W) to power a home throughout the day. The wattage requirement of a home is highly dependent on the time of day and location, with power needs ranging from several thousand watts at one point to a few hundred watts at another.
The number of watts needed to run a home depends on various factors, such as the type of appliances used throughout the day, the weather, and the time of day. By the time you’re asleep, your home will likely be using the least amount of energy it has used all day.
How much power does a house use in 24 hours?
Home size significantly impacts energy consumption, with larger buildings consuming more energy for heating, cooling, and lighting. The average American home is around 2, 000 square feet and uses 30-33 kWh per day. Household size also affects energy consumption, with large households using personal and household appliances more frequently, leading to higher costs. Building materials, such as wood and brick, have different thermal properties that determine their insulation. Wood and brick are poor thermal conductors, preventing heat from entering or escaping the home, while bricks have high thermal capacity and temperature lag, reducing heat flow from outside to inside.
What consumes the most electricity in a home?
Long Island’s electricity rates are set to transition to new Time-of-Day (TOD) rates starting in 2024, aiming to better align costs with high demand periods. However, this could lead to higher utility bills during busy times of the day. Household items such as cooling and heating, water heaters, washers and dryers, lighting, refrigerators, electric ovens, and TVs and DVDs consume the most electricity. To reduce consumption and keep bills low, it is essential to understand the biggest users of electricity in the home and consider investing in a solar power system as a permanent alternative.
What runs your electric bill up the most?
Heating and cooling are the most expensive energy users in the home, accounting for around 40% of your electric bill. Other major users include washers, dryers, ovens, and stoves. Electronic devices like laptops and TVs are relatively inexpensive to run, but they can add up quickly. Unplugging appliances can save electricity as many devices continue to use power even when not in use. Many items have a small circuit ready to trigger when pressed, and those with built-in clocks or settings memory can use power every moment of the day. According to the US Department of Energy, taking the time to unplug appliances could save $100-$200.
What renovations can you do for $100000?
A budget of $100, 000 allows for the completion of a variety of projects, including a kitchen renovation with new cabinetry, countertops, and appliances; a full bathroom remodel with upgraded fixtures, finishes, and tiling; and room additions.
How many kWh per month is normal?
The average residential home in the U. S. uses around 900 kWh of electricity per month, which can vary depending on factors such as local climate, number of people, and house size. The kilowatt-hours (kWh) used by a home determine its monthly electric bill. Understanding the kWh usage can help plan for your bill, identify areas for energy reduction, and determine the size of your solar system. Knowing the kWh usage can also help determine the best solar system size. By understanding the kWh usage, you can save money on your electricity bills and maintain a sustainable lifestyle.
📹 Residential Kitchen Remodel – Electrical Code Requirements – How Many Circuits Are Required? Part 1
Remodeling a kitchen requires you to update the electrical in that area. It is not as simple as just putting things back the way they …
I remember one time I was tracing out wiring in front of a panel to find certain circuits and make a junction box. The GC perusal me said that he thought I was a damn good electrician. I told him thanks, I worked hard to get my license and was proud of it. I then immediately grabbed the wrong wire and ended up cutting a hot wire, ruining my Klein side cutters. I just turned around and told the GC he isn’t any good at judging electricians. Objectively, it was one of the funniest moments of my career. Subjectively, it was pretty embarrassing.
You’ve came a Long way from 300k or 320k subscribers! Great job bro. You inspire me in my field of plastering! I got a few years of apprenticeship and a couple in the field by myself. 😂no journeyman… I guess he trusted me enough 😅 lol great job bro. I’ve been perusal since the beginning in your garage cutting out your own drywall lol. 🎉
was on a job years ago and got a call for an automatic generator running even though the power was on. Was told the electricians and the GC had already left for the weekend so let yourself in the back door. Usually I find a blown fuse for utility monitoring and I’d be done in 5 minutes, but not the case here. The gen set wants to see 240 volts in order to go back to sleep. Anything else and it wants to power the house. (partial house in this case) I start poking at wires and find they are all hot. (head scratching now) I check from neutral to each leg and find 120 volts… then I walk around to clear my head and find the oven and stove are not working. (customer is home now) They also tell me the AC is not working. Hey, I’m the generator guy, not the electrician or AC tech. (although I was in a previous life) The customer also mentions the new 320 amp service was finished up today… and the light bulb over my head goes on. Back at the panel I find all the hot legs are hot but I can’t find 240 volts anywhere unless the gen set was running. Out at the meter (metered main with a pair of 200 amp breakers) I find bug lugs all nicely done and branched off to each breaker… BUT…. L1 is going to both terminals on one breaker and L2 is going to the other breaker. IOW, each double breaker was switching a single leg. I had 240 volts between those breakers but that was it. Every other 240 volt appliance was being fed with two wires from the same leg, unless the gen set was running. The transfer switch was supplying 240 volts to some items when it ran and that isolated the improper utility fed.
Great article… Also, if you don’t have the options mentioned here, to solve extending a HR circuit that’s too short, you can also place a J-box in an “accessible ” attic (keyword – “accessible”) as long as it’s above the insulation. If accessibility is an issue and that’s the only option, I usually request the GC to cut me in a removable drywall capped scuttle hole hidden away in a closet ceiling. I agree with using of a “surface mounted” fixture outlet as a j-box, I just rather avoid splicing extra circuits in them (if possible) because dropping a fixture when trouble-shooting is pain in the …..
I rewired several single family homes into duplex apartments and had to identify what circuit breakers were feeding circuits on second floor so used a radio. Had one goofy customer wanted me to give another electrician a map of all the circuits I spent a hour on identifying so they could give an estimate. Sure no problem. Just give me $75 for my work. So glad that last 25 years as a sparky only did commercial work.
12:16 FIRST OFF, right on, b/c in “MOST CASES” you’ll have homeowners (and kids) walk thru at end if every day Secondly, loving this vid, b/c remodels is most of my work, Thx for the vid, was really awesome; and 100% agree that every trade needs to CLEAN everyday (and doesn’t mean deep clean during demo stage, but binning your old food, drinks, and sweeping up areas etc….making site “clean” and organizing tools just a great way to start next day, imo)✌🏻
We did a kitchen remodel a couple of months ago, and my boss (over 30 years experience in the field) said it was the worst kitchen he has ever seen. There was not a single wire that wasn’t spliced inside the wall. Romex splice into type UF, spliced into cloth wire. The old GE panel was a joke. It was so jam packed we refused to bring any of our new circuits into it, so we installed a sub-panel (which serves as my avatar picture). That kitchen still gives me nightmares and is the driving reason why I will build a house instead of buy one.
QUESTION – How do you get energy both physically and mentally after a long day at work (in the trades). For example I have idea/things that I want or plan to do after work. But due to the nature of being an apprentice, with a physically and mentally demanding job with early starts… I almost crash once I get home and want to sleep after dinner. I really lack the energy, or I can barely focus… It’s quite sad, especially when earning below minimum wage (apprentice wage). Hope you can answer! Thanks 🙂
Used to work with a guy that when we go back to put in the devices after the drywall was up, he take his trash from stripping the wires and throw it in the wall as he went along. Several of us guy told him it was a pretty shitty practice to do it but he always said “they will never know”. One day the owner of the company came to check on the job and caught him throwing some romex sheathing and the paper in the wall. Owner told him that’s not how we do things here and fired him right there.
Speaking as a carpenter who has many times been in the position of having to demo structure before the wiring has been moved, I appreciate your perspective. I was always taught to look out for the guy that comes behind you. (Treat then how you would want to be if you were that next guy.). To that end, I try to leave the wires as long as possible and neatly rolled up if I have to remove devices or boxes. I also always label them as best I can with a sharpie or tape with identification on it. That said, it still has to be a headache to sort it all out. In fact, I know it is because I’ve also worked as an electrician in the past or been the one doing it in lieu of an electrician. Point is, always do your best to make the job easier for the next trade or for yourself when you get to that part.
I will never use existing wire in a remodel/teardown if I do not have too (MAYBEEEE some HRs)…I usually like to donate it to my local scrapyard…They do this CRAZY shit with the copper wire that turns it into money…And then I have the boss by us all new wire….I don’t trust other peoples splices/joints…Esp when I see others strip wire with linesman but have NO IDEA how much force to use and SNAP goes the conductor! Edit: I have to add, worst case scenario when doing a re-model is the Rock guys aren’t touching ANY OF THE ROOMS YOU HAVE TO RE-wire and keeping that existing rock IN THE ROOMS YOU HAVE TO RE-wire…You think it wouldn’t happen bc it’s common sense, right? NOPE! I have seen complete, upside down re-models were no wiring what so ever was happening in all the re-modeled rooms and a TON in existing rooms where they weren’t putting up any new sheet rock…YEP!
Nice article, thx! – I’m a builder in MI, mostly $1m+, & had to respond to your comment re: clean up. I’m amazed at the mess the electricians leave behind on our projects & this is across the board (almost every elec. sub I’ve used) They’ll come in, even on the finish and leave a mess in their wake; screws, wire, etc on FF – and yes, I b…h. Feels like it’s almost learned behavior; Get the sense there’s a bit of arrogance there, like “hey, I’m an electrician, cleaning up is beneath me”.
Handyman here I watch ur article all the time, I have learn a lot from them. I’m in California and wanted to know how is a house divided up in regards to home runs. Most of what I do in regards to electrical is replace outlet, and move them if needed, relocate light fixtures, mainly in bathrooms and kitchen. One of the things that bug me is a building code that allows electrical wires to be pushed into the back of the outlet. Most of the outlets I replace have scorched marks behind the outlet. I would bet there has been a few house fires caused by this. Please talk about the use of extension cord. I see a lot of the used in homes with large families in a 3 bedroom house. I explained the dangers of electrocution and house fire from a over heated cord. Thanks
I’m doing a full remodel on the house we are moving into. There are three separate main panels in this 1952 cement block house. I’ve decided to completely rewire but not kill many of old circuits until I’m done. It looks like every time they wanted to add something they just sliced in at the drop & added a new panel. I’m just about convinced that the cement block construction is the only reason it didn’t burn down ages ago. I’m enjoying your website. It, some code books, & a few other websites are helping me get ready for this project. I am no electrician but was raised by one & I’m looking forward to the work, minus the crawling around in the attic part.
This is why i love my country’s electrical system, i do remodels all the time i can swoop in cut everything away and make it to my hearts contempt, we lay pvc pipes to boxes in the middle of the room behind a ceiling light. Which on their turn go to the fuse boxes. Way easier to modify later on down the line
Dustin… you’re good at what you do, you also bring back into us old farts some reminders. If I test out old work, I always keep decent lengths of scrap wire around because well, hey, will come into use somewhere and will save going and buying 250 ft rolls of 14/2 or 3…….or 12/2, or 3. You should do some stand up, hilarious.
The one time I went through and just cut everything out was during a full rewire and remodel of a building and nothing was being saved so first step I did was pull the electric meter and disconnect the overhead service drop from utility company triplex. That way I knew everything was dead and I didn’t accidentally cut through a live conductor. Then I took a sledgehammer to the wall that the panel was mounted in as it was coming out and then went through with the big loppers and just cut all the wires at the top of the panel
I’m a DIY homeowner who does some electrical work. I’m enjoying learning more from your site–including where my limits lie! I have some very nice tools tradespeople have left behind when the job is done. I always call and let them know but the great bulk of the time, they never come to get them. So, there’s an odd advantage to the homeowner from those tradespeople who do not pick up after themselves!
I was amused at your cleanup comment., I was a chief photographer for a newspaper in North Carolina in the early ’70s. I got the OK from the publisher to do some major remodels of the darkrooms. When the job was just about done, I asked some of the tradesfolks if they were going to leave that mess behind. “Kid,” one of them said (I was called “kid” until I was nearly 30), I’m not sure how much you make, but I bet I’m paid a lot more an hour than you are.” I grabbed a broom and a dustpan.
I’m so stumped by trying to re do the lights in my garage. There’s no power at the switch, and the exterior garage light is wired in line off the first light. It’s all 12/2 so I can’t figure out how they had so much stuff running together. With multiple switches for most of the lights and a garage door opener and separate light coming from a junction box with the light on its own switch. I have it cobbled together were I have the exterior light switch working but the rest of the lights have to be turned on and off at the breaker, and the second garage door opener is just disconnected. The home is from the 70’s maybe that’s why I’m so confused. I’ve never been this stumped before I’ve never encountered anything so convoluted before. I’m not an electrician. What I do know is from decades of being a carpenter and a few years of HVAC experience.
Question please? My mobile home got hit by lightning. Had the meter box replaced and 11 electrical outlets and one breaker. One side is still weak, and the lights are dim. Turn microwave on and the TV goes out. Is there a junction box for both sides. I can’t get an electrician to come out. They are all afraid of going under house.
Be respectful to the sheetrock repair people and owners of property. Just don’t go blowing hole past studs for no damn reason. Plumbers are the worst. They just blow out huge holes with there hammers and say F** the owner and repair costs. Don’t do this. Be respectful. I know because I do also sheetrock repairing.
I installed a whole house fan a few months ago in our (unfinished) attic, and I had to move a couple of home run conductors out of the way because they were over the spot I needed to install the fan. One HR was a regular 120v line and the other was the 240v going to the AC compressor. I cut the conductors, ran the service sides to junction boxes and connected it to a new length of romex which I ran to secondary junction boxes and connected the cut load sides to the new length of romex. I of course used the same gauge romex as the existing conductors, used properly rated wire nuts, and clamps in the knockouts. Was it okay that I made those joins in junction boxes in the attic and not in devices that you could access from within the single story house?
I am considering buying a home and some abando crazies that stole the outside weather head, feeder, and socket by cutting all the wires short and at the panel box inside the property they cut all the wires going right inside the panel box. What would you do In this situation other than make a s$:( ton of junction boxes before the panel box?
I keep trying to watch articles on this website but I can’t exactly put my finger on it but I can’t ever finish a article of yours you probably have important information but it seems like you ramble alot and explain the same thing multiple times and it gets boring I’m not sure if you have a script but I think that would help or maybe you want the longer articles so you keep the rambling whatever the case just know it is off putting
Make sure you are paid in full before having power or meter installed. Twice had customers try to beat me out of last payment then attempted to go over my head to have the meter installed. Best was installed 4 meters for a triplex apartment. Guy never gave me a second check after I had 4 meter sockets and 4 panels installed so I took the panel & meter covers home and canceled permit. Luckily at that time panel manufacturer changed the design
It amazes me that you would even have to mention about cleaning up after yourself. I think I learned that back in kindergarten. Personal experience, flooring and plumbing guys have been the worst. Leaving razors all over the place and cutting random size holes that they don’t patch or tell anyone about. Just blows my mind. I do property maintenance btw.
+1 on clean up after yourself. personally had contractors work on my house and the boss comes by for payment and i’ve taken him to the work area and said… this isn’t cool man. background: my first profession was bodyman, or collision repair specialist (ugh), that was a family profession. one thing my grandfather taught me was, don’t move the seat or mess with anything in the car that you are working on, unless you have to to do the repair. that’s not your space, it’s the customer’s, leave it as they left it with you.
If customers request shoe coverings. For $29 buy a pair of kick-ons. They are fast on and off because you slide them on and off your boots. Heck with those blue booty crap. I have had them for years and customers love them. Kick-ons have their own web page. Last pair I bought was from Amazon but the currently don’t have large.
I lined up all wires and three switches for light in my leaving room and two switches for a kitchen and I was about to hook up them to power it turns out a wire with power had two hot wires and ground . In order to alleviate stress I torn down two walls and ripped an oil tank out. It did not solve the problem, how would it ? After taking to a neighbor and googling I learned about loop switch and that hot wire used to be a part of it . I still do not know what I am doing but my next step will be to open outlet box where I believe that wire connected
I had about half of my electric redone back in 2016. I had knob and tube in half my house and I paid to have a company re-do all of this. They ABSOLUTELY did NOT clean up after themselves. In fact, they made HUGE messes pretty much everyday and I cleaned up after them pretty much everyday. The only benefit is I gained a whole lot of electrical supplies that they left behind. But it was just a really awful (overall) experience. I only wish they had gone through the Dustin Stelzter professionalism courses!
I got into a huge remodel last year, I didn’t know what I was getting myself into. It ate my lunch. I got 90% of the work done but had to tell the guy to find another electrician to finish up. It was killing me and wasn’t fair to him because I couldn’t be there 5 days a week to keep up with his other contractors and keep him on schedule with his inspections. The amount I told him I’d charge him was half(or less) than I should have changed him and I got paid 1/3 of the amount I should have.
I know it’s like “I’m just going to be back here in the morning so why clean up,” but, while some customers share that thinking, most see leaving a mess as a sign of a hack electrician. Even when the customer says “O, leave that mess. I’ll clean that up,” I insist on cleaning it to AT LEAST the level that it was at before I started working. On the other hand, I’m also sure to only clean up any mess that I’ve made myself through the work. I’m not there to tidy up for people or clean up after another contractor. Some contractors count on “the clean guy” to bail them out.
My best tip is to find a job in heavy commercial to heavy commercial. You will need a whole lot of prior experience or be able to ace a pretty darned difficult pre-employment test on code, math, geometry and strange workmanship practices, like concentric bends, bus assemblies, load calculations, and using expensive materials that you have never seen before in your life.
I worked with a electrical company for a while and this remodeling contractor would call us for miscellaneous stuff like this except usually it was one time to see the house and it was for final assembly, maybe we would have one or two labeled wires and it was funny after the first couple of these jobs, he would still expect us to be “quick and cheap” but leave us a massive amount of mess to untangle and sort out with walls in the way of seeing what was there 😂😢
I’m in the IBEW and currently I’m working at a industrial job site. Don’t really like it since all I know so far (a year in) is to bend pipe and pull wire. Hence I start my apprenticeship this September. I’m thinking on going residential because honestly wiring things up is more interesting to me than just bending conduit everyday.
I’m a DIYer, and trying my best to follow codes. I’m used to seeing the yellow jacketed 12/2, but I’m also seeing both a blue and gray jacket 12/2 at my Home DePot. I’m reading the label, but didn’t see what the difference was for. Also, the home I’m working on has black jacket 12/2 wire in it with a 20 amp breaker. Would I be fine connecting in a box and continuing with the yellow jacketed wire to new outlets.