Size Of Mag Lock For An External Door?

Maglocks are 12-24VDC powered electromagnets used for commercial and institutional applications. They are durable, budget-friendly, and fail-safe electronic locks that use a magnetic mechanism and armature plate. Most doors are secured with a 1200-1500 pound maglock, which depends on constant power to remain secure. To maximize the holding force of the magnet, the door maglock and armature plate need to be in full alignment.

Maglocks can be used on large iron and wooden gates, as well as other external doors. The holding force required depends on the door’s use, and the size of the magnet can vary depending on the door’s purpose. There are three common holding-force sizes for maglocks: 600, 1200, 1500 lbs, 180, 280, and 545kg.

Stainless steel magnetic locks are ideal for use on hollow metal steel doors, storefront aluminum doors, commercial wood doors, and more. Weatherproof maglocks are ideal for outside applications, with a strong holding force of up to 545Kg (1200lbs) and are suitable for gates and barriers. IP67-rated SecureMyDoor IP67 weather-resistant external magnetic locks are suitable for door openings with a height greater than 1955mm measured from the bottom of the lock once fitted.

Indoor options are available in single or double-sided configurations. The 2023 product catalogue details the various models and brands of magnetic locks, including the 600WP magnet, 600WP armature, and 1200WP magnet.

Are front door locks standard size?

Standard door measurements include the lock bore, which is 2-1/8″, and the backset, which is the distance from the door’s edge to the lock bore’s center. Standard backsets include 2-3/8″ and 2-3/4″, while other backsets include 2″, used by National and Lori Lock, and 5″ used by Weiser, Weslock, Kwikset, and others. Extensions for some brands, like Schlage, can extend the latch to have the lock located in the center of the door. When replacing locks, the latch backset must match the holes bored in the door.

Lock spacing is also important, with two standards for spacing between the bottom lock and the deadbolt: 5-1/2″ and 6″ from the centers of the two holes. Specialty locks may use other combinations of spacing. The best choice for adding a deadbolt lock is one of standard measurement.

How do I choose a lock size?

To replace your first lock, measure the door from its outside edge to its center and then from its inside edge to its center. If the first two measurements are equal, you will need an equal cylinder lock. Choosing the right replacement lock can be confusing, especially for first-time buyers or experienced homeowners. This guide provides all the information needed to help you choose the correct type of lock and determine the right brand for your door.

First, identify the type of lock your door needs by checking for the manufacturer stamp on the face of the lock. This will narrow down the number of options available from the vast number of door locks available on the market. After reading this guide, replacing your lock should be swift and simple.

What is the standard lock on a front door?

Euro cylinder locks are a popular type of lock commonly used in modern homes, particularly for uPVC and composite doors. They are often used with multi-point locking systems and mortice deadlocks on timber or aluminum doors. To identify if your door is a euro cylinder lock, look for signs such as a handle or escutcheon, a lock that looks like the pictures above, and a lock in a protective surround. Euro cylinder locks are commonly found on external front doors, external back doors, and internal doors, which can be used in offices, schools, and hospitals.

Advantages of having a euro cylinder lock include preventing lock snapping, drilling, bumping, or picking, making it easy to operate, easily changing to a higher security standard, and being keyed alike or master keyed, reducing the number of keys required.

What size front door lock do I need?

In order to ascertain the dimensions of a lock, it is necessary to measure the distance between the edge of the door and the center of the handle or knob. This will yield an approximate measurement of the backset, which can assist in the identification of the type of lock or latch.

What is the strength of a magnetic door lock?

Electromagnetic locks are single door locks with dynamic holding force capacities of 600 lbs. and 1200 lbs. respectively. They are not suitable for high security applications due to the potential for power disruption. However, they can be implemented with a magnetic bond sensor and a power supply with a battery backup capability for specialized higher security applications. Electromagnetic locks are ideal for emergency exit doors with fire safety applications as they have no moving parts and are less likely to fail.

The strength of electromagnetic locks is comparable to conventional door locks and they are less expensive to operate than light bulbs. A separate release button is typically installed near the door, which has a timer that keeps the lock unlocked for 15 or 30 seconds in accordance with NFPA fire codes. A second release is required by fire codes.

The first modern direct-pull electromagnetic lock was designed by Sumner “Irving” Saphirstein in 1969 for initial installation at the Montreal Forum. He initially proposed using a linear stack of door holders as an electromagnetic lock, which he believed could be packaged and adapted for fail-safe applications. After a successful prototype and installation, Saphirstein continued to evolve and improve the design, establishing the Locknetics company to develop accessories and control circuits for electromagnetic locks.

How do I know what size padlock I need?

The padlock has a width of 30 millimeters and provides 30 millimeters of available clearance within the shackle. The next measurement is the clearance height.

Are all exterior door locks the same size?

Cylindrical locksets are characterized by a standard hole size of 2 1/8″ and are widely utilized in residential settings. The standard backset is 2 3/8″ or 2 3/4″, with the former being more prevalent. The majority of locksets are equipped with an adjustable latch, irrespective of the specific type.

Do magnetic locks work on doors?

Mag locks are versatile security solutions suitable for both interior and exterior doors, including emergency exits, delayed egress, and controlled egress doors. They can be integrated with access control systems, used as fail-safe doors, panic bars, traffic control doors, exterior entry points, and security gates. They offer a reliable security solution for commercial environments, making them a valuable choice for various applications.

How to determine door lock size?

The mount on top was drilled to accommodate a 2-inch and 3/8-inch bolt. When a tape measure with a threaded rod was pulled across, the center of the hole was found to measure 2 inches.

How do you fit a maglock to a door?

To install a magnetic lock, drill holes in the wall and door to screw in the lock and run wires through the wall to connect it to a permanent power source. The Schlage 400 series maglock is recommended as a good all-around lock. Installation instructions follow the same format: drill holes, mount brackets, run wires, power up, and test.

Testing the lock is crucial. Connect power and test its unlocking capabilities with your access system. When powered, the lock should hold the door closed tightly, and when cut, the lock should open. The Schlage 400 series maglock is a good all-around lock, and detailed installation diagrams can be found on this page for all configurations. Testing the lock is essential to ensure proper unlocking and ensure the lock is functioning properly.

What is the standard size of a door lock?

The standard dimensions for a door include the lock bore, which is typically 2-1/8 inches. In the past, doors were constructed with smaller bores, but contemporary locks are designed to accommodate the standard bore.