To prepare and paint stucco, apply a cleaning solution to the surface at a downward angle using a 65-degree nozzle tip. Maintain a distance of 18 to 24 inches between the nozzle tip and the stucco surface and let it sit for 5 to 10 minutes. Keep the cleaning solution moist by using a wide nozzle sprayer. Back rolling is the act of using a roller to squeeze the paint into the voids and crevices in the stucco surface to create better penetration and adhesion.
When pressure washing exterior stucco, use a low-pressure spray to remove dirt and use a low-pressure spray to remove dirt. Most professionals use airless sprayers on full exteriors for speed, efficiency, and flawless results. For an even finish, back roll the paint while the paint is still wet. This forces paint into areas you want.
Painting stucco is always easiest when using a sprayer, but to get maximum protection and quality coverage, trusted house painters recommend back-rolling each coat or at least the first coat. Backrolling your paint on stucco gets the paint in all gaps, crevices, nooks, and crannies.
Back rolling is essential for stucco surfaces, especially rougher textures. A sprayer can put more paint on the wall, so not every surface needs to be back-rolled after spraying. Always use the biggest skin you can get, one inch or one and a quarter. Back-rolling right after spraying works the coating into the surface more efficiently than spraying alone, promoting better adhesion between the coating and the surface.
Spraying paint on stucco gives better penetration and coverage into all the crevices, as stucco is an uneven surface.
📹 Why You Need To Back Roll Stucco When Spray Painting
Homeowner Painting Tip: Spraying Stucco. Painting stucco is always easiest when using a sprayer to apply the paint. However to …
📹 should i backroll stucco when painting with an airless paint sprayer
CLICK HERE FOR “PAINT Business Start-up Guide”https://tymo.krtra.com/t/x3WbNZR1sm9c FaceBook Ad Strategy I …
What’s the point of spraying, which uses up to 50 percent more paint, including prep and masking everything, and backrolling? I painted my entire house using a good roller and didn’t have to deal with taping, masking, plastic and the cleanup of the machine and the wind conditions. My house has a heavy stucco texture also. Bottom line is leave the spraying to professionals, your cost will be 5x more than doing it yourself, but it’s a trade off. Why buy an expensive machine that you might use once and park it in your garage? Unless your painting a huge house with multiple rooms. Just my opinion