BEHR ULTRA™ paint is a stain-blocking paint and primer that offers excellent durability and hides in fewer coats. It is recommended to allow new stucco, plaster, and masonry to cure for 30 days before painting. BEHR ULTRA™ paint is suitable for repaired or uncoated surfaces, including woods with tannins (two primer coats required for redwood and cedar) and heavily stained areas. The most rated lifetime warranty on BM paint is 35 years, while SW duration has a lifetime warranty.
Beehr Premium Plus and Behr Ultra paint can provide coverage for between 250 and 400 sq. ft. per gallon, with the general recommendation to apply two coats. For heavy stains and woods containing tannins, allow 12-16 hours of dry time between coats. Cooler temperatures or higher humidity may prolong drying time. After 4 weeks, cured paint film may be cleaned with a mild, mild soap.
The Aura Exterior line is the brand’s top-of-the-line, ultra-premium exterior house paint, featuring exclusive Color Lock® technology for rich, full color and performance. Both paints are available in flat, satin, and semi-gloss finishes and cover between 250 and 400 sq. feet per gallon.
To apply BEHR ULTRA™ paint, ensure that air and surface temperatures are between 2°-32°C and will remain between 2°-32°C for at least 4 hours after applying. On average, wait about 4 hours between coats, but in areas with high humidity, it may take longer. Paint doesn’t fully cure for many days, so more coats can be applied after a few hours but it takes days to cure.
In conclusion, BEHR ULTRA™ paint is a durable and effective stain-blocking paint and primer that provides excellent durability and hides in fewer coats.
📹 Comparing 4 Types of Home Depot Paint (Don’t Waste Your $$$)
Need Answers or Advice for your DIY Project? BECOME A DIY MEMBER NOW!
When can I apply a second coat of Behr paint?
The BEHR PREMIUM ® Porch and Patio Floor Paint is a 100 acrylic latex, mildew-resistant finish for interior and exterior use. It will dry to touch in 1 hour, but it may take 4-6 hours before a second coat is needed. Certain colors may require multiple coats for complete coverage. Before use, ensure the surface is fully cured. For wood porches, refer to the video on how to apply BEHR Premium ® Porch and Patio Floor Paint.
How long do you have to wait for paint to dry before applying second coat?
After a first coat of paint is dry, it is safe to recoat it after four to six hours. Water-based paints should be recoated after three hours, while oil-based paints should be recoated after 24 hours. The paint’s label instructions can provide the best answer. The curing time is the time it takes for paint to harden completely, which can take up to a day for a second coat. It may take weeks for the paint to dry enough for washing or other use. While waiting weeks isn’t ideal, it is necessary to allow the paint to cure, depending on the humidity and temperature in the room.
Do I need two coats of paint on the exterior?
The number of exterior paint coats needed depends on factors such as paint quality, color, surface, and existing paint condition. For most projects, two coats are typically required, with the first serving as a base and the second ensuring an even finish. However, a third coat may be needed for darker colors or poorly shaped surfaces. Factors affecting the number of coats include the current paint color, surface type, and paint quality.
Rough surfaces like stucco or wood siding may require extra coats, while smoother surfaces like aluminum or vinyl siding may only need two coats. Professional painters generally apply two coats of paint for exterior projects to ensure better coverage, adhesion, and durability than a single coat.
How long does it take to recoat Behr Ultra?
It is recommended that the material be thinned with water at a rate of 1/2 pint per gallon if a sprayer is to be used, rather than a roller or brush. The drying time is 60 minutes at 77°F and 50% RH, 120 minutes for recoating, and four weeks for full curing, with the aforementioned times dependent on temperature, humidity, and film thickness.
How long does Behr Premium Plus exterior take to dry?
The product reaches a dry state within four hours when exposed to temperatures between 35 and 45 degrees Fahrenheit and humidity levels between 50 and 80 percent, with an eight-hour interval between coats. In the case of heavy stains and tannin-containing woods, a drying time of 12 to 16 hours is recommended. It should be noted that longer drying times are required in cooler temperatures and higher humidity.
How do you know if you need two coats of paint?
A minimum of two coats of paint is recommended for any wall or ceiling painting to ensure a seamless finish and durability. This is because only one coat can provide a beautiful, practical color. Some brands offer a scrubbable finish, such as Little Greene Intelligent Matt, Dulux Diamond Matt, or Tikkurila Optiva 5, which can provide a more durable finish. The number of coats depends on the material and previous color of the wall, such as adding primer or undercoat paint for unfinished drywall or adding another coat if the wall was previously painted a darker color.
Lower-quality paint may be tempted, but it may require more coats, cost more, and take longer to apply. A better-quality paint, like Little Greene paint, provides the desired pigmentation and coverage with fewer coats. In summary, two coats of paint is the ideal rule of thumb for any wall or ceiling painting project.
Do you have to wait 2 hours between paint coats?
After a first coat of paint is dry, it is safe to recoat it after four to six hours. Water-based paints should be recoated after three hours, while oil-based paints should be recoated after 24 hours. The paint’s label instructions can provide the best answer. The curing time is the time it takes for paint to harden completely, which can take up to a day for a second coat. It may take weeks for the paint to dry enough for washing or other use. While waiting weeks isn’t ideal, it is necessary to allow the paint to cure, depending on the humidity and temperature in the room.
How long does Behr Premium Plus Ultra take to dry between coats?
The drying time for the paint film is one hour at 25 degrees Celsius and 50% humidity. Recoating can be performed in two hours, although longer drying times are required in cooler temperatures and higher humidity.
Does Behr Ultra need two coats?
This text provides a detailed guide on how to properly apply BEHR ULTRA™ paint to surfaces, including countersink nailheads, remove rust, loose or peeling paint, repair imperfections, wash off dirt, grease, and chalk, and remove mildew stains. The product is used as a primer for repaired or uncoated surfaces, including woods with tannins and heavily stained areas. The first primer coat locks in stains, and if necessary, a second coat is applied. A tinted primer coat is recommended for drastic color changes or deep colors.
The product should be applied on dry substrates between 35°-90°F (2°-32°C) and will remain between these temperatures for at least 4 hours after application. It is not recommended to paint when rain or heavy condensation is expected. The product should be stirred occasionally and mixed to ensure color and sheen uniformity. For semi-smooth surfaces, a high-quality nap roller cover, nylon/polyester brush, or airless sprayer is recommended. For rough surfaces, a high-quality 3/4-1″ nap roller cover is recommended.
Certain colors may require multiple coats for complete hide. Dry paint film can be cleaned with a mild, non-abrasive liquid detergent after 4 weeks. The product is mildew resistant and should not be used on floors.
Can you paint second coat same day?
Latex paint, a water-based option, is a popular choice for environmentally conscious individuals due to its faster drying and curing time than oil-based paint. It comes in different finishes like matte, eggshell, semi-gloss, and high-gloss, and the recoat time varies. Flat paints typically dry faster than glossy paint, while eggshell and semi-gloss are in the middle. A minimum of 24 hours is required for a second coat.
📹 Home Depot Behr Marquee vs. Ultra vs. Premium Plus
In this video I tested Behr Marquee, Ultra, and Premium Plus paints from Home Depot to determine which ones had the best …
I used Behr Premium Plus on our basement reno. Satin sheen, and “Cotton gray” as the color. We applied 2 coats of kilz2 over a knockdown texture. Then 2 coats of the Behr paint. Two 5-gallon buckets was more than enough for about 1200 sqft of basement. My initial impressions where that the paint was very thick, but spread really well with a 1/2″ nap roller, and back rolling. I did not notice any splatter, but I do work slow and careful than a professional might to avoid messes. After 2-years the walls looks great! If they get dirty, simply wipe clean with a damp soft cloth or maybe a mild cleaner. We love the color so much that we decided to use the exact same paint upstairs to cover the off-white ugly stuff. What is amazing is that we purchased these paints 2 years apart, and I can use the new paint to touch up the 2-year old paint downstairs! For the upstairs, I applied a single coat of Kilz 2 to help block stains, flashing from hole repairs, etc. Only needed one 5-gallon bucket this time around to cover a living room, kitchen, and hallway with two coats. I’ve had zero issues with the Premium Plus from Behr. The “thickness” you mentioned does subside after it cures. This is not to say it’s a superior product to SW, just giving my experience with it as a DIYer. Thanks for the content!
I’m gonna have to call you out on this one: if the stain is going to bleed, you can’t rush it drying so much. I’m not talking about your first coat, but you need to check for marker a day or two later. Bleeding takes time, that paint is still shiny (clearly not dry yet!). There’s no reason you couldn’t have done this test with a little YouTube magic and checked it the next day. Two of my all-time favourite paints: ProMar 400 specifically for ceilings. It’s not a premium product, but if you have an open or semi open concept house, that stuff is incredible to touch up. We have a hotel maintenance contract and have lots of side-lit ceilings that are sometimes 200-300’ long in the hallways, being able to do a spot repair is probably our single most important property. It scuffs easily and can’t be cleaned, but that doesn’t really matter on a ceiling. Besides, if it does get dirty you can easily paint over it. The other one you’ll have a hard time talking me out of is BM Advance for cabinets and trim. The stuff is like liquid butter. You do need to watch the dry time, it really does need 16 hours before recoating or the alkyd components reactivate and it turns into a sticky mess. But if you follow the can, that stuff is beautiful to paint with, leaves a fantastic finish, and is extremely durable
Love this, especially the shots at the end showing the texture. If you do something like this comparing other brands, I’d love to see what a close up of your go to paint looks like so I can better learn what to look for and what it should look like. I think in other articles you have said more solids in the paint is a good thing? Hence not washing what you sand off in between coats. But in this case, the higher end Behr paints are too thick? Or is it just a different thing? Also can’t wait for the butcher block counter article!! I am planning on doing that same project soon.
I’ve painted rentals as cleaning prices of walls were almost in the same range, so had the chance to test out different paints for durability and fade longevity (they all splatter to some degree, there’s never a situation where less splatter will save the day). Was surprised as Behr Marquee was just as good (better in some areas, less so in others) as SW Emerald and BM Regal/Aura. Don’t know if Dynasty is worth it as Marquee really stood up to what I would expect from a pricier paint. I have noticed a lot of professional painters using Behr’s Premium Plus for their value priced jobs recently as well, so I would say Behr is a good paint brand at this point. That said, I do prefer to use BM as it smells the best, thinking about it I kind of want to go huff some now.
dude I work in the paint dept at HD. Your throwing shade on the number one paint in Canada (consumer reports), having all those 5 gal empty pails in the background with a licensed name on it wouldn’t have any biased meaning behind it would it? Oh and btw, your not telling the truth about the price. Its comparable.
Ive used BM, SW, PPG and behr. I use behr to paint 2 interior houses, chicken coop, shed, and oudoor stairs and exterior doors. Much more durable then the expensive stuff. PPG is great interior. SW paint has paper clumps throughout it and splatters like crazy. Behr and PPG is great long term. Dont like Behr stain. Dont use it. Agree behr finish can look ‘plastic’ but it’s durable!
as someone who has used 4 or 5 dozen gallons of behr paints in my multiple homes and rental units, I have something to add, when it comes to dark, deep or blood red, none of these paints are one coat, more like 3 coats (dynasty is the worst!!!) and I think the dynasty line is overpriced BS and have done direct comparisons with the marquee, always finding zero reasons for the additional cost, for reds I prefer the P&P line with 3 coats, and I prefer the marquee for non-reds, and marquee for high use areas like kitchens, bathrooms, etc and the P&P for bedrooms and closets, I don’t have kids but I’m personally like a bull covered in lube trying to escape a china closet and quite messy myself and both of my favorite lines allow me to easily clean up all kinds of adult style stains and spills just fine, plus I always keep a little extra on hand for stain coverage when tenants move out of one of my rental units or when my wife throws a glass of red wine at me (always when I have it coming lol) oh and one other thing, I always put two coats of Kiltz primer on new drywall before ever attempting to put color on the wall, I find this necessary for a good finish and single coat coverage, and I often put a second coat on even with one coat paints because I’m ocd and there is always a holiday I missed somewhere that I’ll notice later when its dry and its to late to recoat easily. (a holiday is a spot you missed or thin spot that shows up( later, its called a holiday because you must have been on one for a second while you were supposed to covering that spot, lol)
I’ve painted every house I’ve lived in – starting as a teen. Cost is a factor. Coverage and ease of application are factots. Washability became a factor due to having kids. The biggest factor is wearability; how does the product hold up over time. That’s not something you can address in a demo, but your feedback based on experience would be useful. Rooms get repainted, but hallways and stairwells may be redone less frequently.
Notice to everyone: Behr Paint is affordable. Please think again. He is in Canada thats why its costing him so much money. If you live in the USA its a $50 per gallon. Do more research. Love your articles but this is highly disingenuous. You are in Canada, Behr Paint cost $100 for you. In the USA its $58, though most people like me get it for $50. State that when you talk about its price to be more transparent and genuine.
Like your content but I say buy what works for you. Restored two houses, used B. Moore products in house #1 interior and exterior. Lost count of coats covering the exterior primer coat (except with in the interior where two coats usually worked.) Used Behr Marquee in house two with coverage of exterior (dark over light) using two coats. Interior colors were dark over light colors mostly with one coat. I cut my labor time in half with the Behr products. I value time more than the cost of the product. House two was sold, still live in house #1 and need to freshen the exterior with the same shade (exact color match) result being a superior paint job over the Moore paint. One coat! Both products were equally expensive at the time of painting but for me the real savings came with the time saved.
I’m a professional painter and I believe that Behr Marquee is the best paint on the market. Yes, it’s thinner than other paints. I found that it covers better than any of them, including the Sherwin Williams and the Benjamin Moores–both of which are great brands. I find the thinner Marquee is much easier to work with for cutting in.
I will not allow the customer to spec the paint. Too many disappointing results and arguments. I get my jobs through referrals. I go to an actual name brand paint company store where professionals buy their paint for a reason. Right now Sherwin Williams is my 1st choice. And yes quality paint is expensive but labor is more expensive and reputation is priceless.
I noticed that if you choose a one coat listed color, it works just as well with there economical paint to preform as one coat. Some colors pigments are just naturally transparent and will not be listed as one coat. Its about the pigments, not what behr can you use. Regarding sharpies, due to there ingredients, they will keep leaching through paint even if it appears covered at the moment, even days. It’s better to try to remove as much as possible with alcohol first or a Magic erasers which are great for removing many different types of stains. Better then covering it to then keep painting over it.
Wrong on the price and the finish. It doesn’t matter if you you use Premium Plus or Ultra or Marquis for the washability. What matters is if you use Flat finish or Eggshell enamel. You should know that. Also your pricing is way off. Premium Plus is under $30. Ultra is about $34. Marquis is under $50.
I have no idea where you got your pricing info from, but that is NOT correct. You can even go online and see – Per gallon: Premium Plus Flat: $28.98 ULTRA Flat: $36.98 MARQUEE Flat: $49.98 DYNASTY Flat: $59.98 I’m a former HD Paint Department employee, and I am a bit biased towards Behr. Marquee is my personal fave due to the coverage. Dynasty is waaaay too think for my taste, though. There are some caviats to the “one coat coverage” claims that are not often discussed by associates… The paint will absolutely cover in one coat, BUT, ONLY if you use one of the one-coat guarantee colors. If you use a color that is not part of that collection, it is not guaranteed to cover in one coat. Here’s the “retail rule” that anyone who has ever worked in specialty retail will tell you: RTFL! Read. The. F*#@ing. Label!
It appears that you’re using Behr Premium Eggshell, the photo example you used is flat. The Eggshell retails at $31.98… not $50, The flat retails at $28. If you did in fact use the flat, yes it’s not enamel but the rest of the premium line is. Behr Scuff Defense Eggshell retails at $39, not $66. You can actually scrub the shit out of it. It is washable. Marquee Eggshell retails at $52.. not $80. Your can was thin but 97% of users complain that it’s too thick. Dynasty Eggshell.. retails at $62, it does not cost $100. I’m confused by this.
Super late to the party, but this is really cool to see. My Dad always swore by Benjamin Moore and Sherman Williams. In our house, I bought two different colors from Benjamin Moore, and then one dynasty from Behr. All were eggshell. The champion cobalt (dark blue) from Benjamin Moore drove me up the wall it was so thick. The sort of aqua highlighter blue (not my choice) BM paint was pretty nice to use. I used Vine Leaf from Behr (darkish forest green) and I loved how it rolled and cut with a brush. I used shipwreck in satin in the bathroom, which is a similar but more grey I think blue than you’re using here, and it had a bit of a technical issue (little volcano crater things, but not fish eye). Beyond that issue though, it was great. I don’t have a background in painting. These were some of the first real paint jobs I did. I fully realize I could be doing something wrong. But I couldn’t wrap my head around everyone online saying how bad Behr was to my experience with high end paint literally in the same week as the Behr paint. Your comment on paint sagging is interesting, are those walls textured? Do you think it would be as apparent on textured walls? Mine are and perhaps that’s part of why they seem similar, finish wise? Lastly, I will say this. I went into it fully expecting two coats no matter what I painted with. It’s interesting seeing how one cost could be achieved if you know what you’re doing and have that skill. Thanks for the article. It’s a nice reality check to see someone change their mind with new information.
🎯 Key points for quick navigation: 00:00:05 🎨 The speaker, a professional painter for almost 30 years, disliked Behr paint based on past experience but is testing four of their product lines to see if they’ve improved. 00:00:28 💸 Behr’s paint pricing ranges from $50 to $100 per gallon, with significant changes in their marketing approach. 00:00:43 🖌️ The paints claim to be stain blockers; the test will determine if they can cover common stains like marker lines. 00:02:20 🧪 Initial tests show that Behr paints splatter significantly, suggesting a need to work slowly to avoid mess. 00:03:41 🔍 The paint thickness and coverage vary; the speaker examines the paint’s ability to block stains and discusses the differences between products. 00:06:47 🚫 Some Behr paints need thinning to use with a sprayer, unlike other brands that don’t require this. 00:08:00 🧼 Premium Plus paint is less messy and covers well but is not washable or scrubbable, making it a budget-friendly option at $50 per gallon. 00:10:32 ✨ Higher-tier Behr paints offer more durability and washability, with prices increasing up to $100 per gallon. 00:13:37 🔍 Despite claims, the stain-blocking feature does not work well with markers; the speaker recommends using an oil-based stain blocker instead. 00:18:40 🖌️ Behr paints are thick and require using a thinner roller and stiff brush for better results; this may differ from traditional paint application methods.