Outdoor paints, also known as exterior paints, are designed to withstand various weather conditions and surface challenges. They often contain three main components: paint additives, insulating powders, and stucco. When redoing a ceiling with popcorn, homeowners must choose between spray paint or tear it down. Insulating powders, which contain microspheres, can be stirred into the paint.
Popcorn ceilings are made from a textured surface, which is applied with a hopper or texture machine and can be rolled on. Sherwin Williams offers a texture machine for this purpose. To create a smooth, sand, and popcorn finish, use a loaded roller and paint over it with “ceiling white” paint. If the ceiling hasn’t been painted in 10 years, it will soak up the paint.
When choosing an exterior paint, homeowners must select the right paint additives, such as insulating powders and microspheres. Using a sample of the original stucco can help match the paint with the paint. Exterior latex paint can be mixed with the paint and rolled on, resulting in a smoother finish.
In summary, outdoor paints are essential for enhancing curb appeal and protecting a home from harsh weather conditions. However, popcorn ceilings can be cleaned using a thick roller and ceiling white paint. It is recommended to apply two coats of popcorn ceilings and avoid rerolling the same spot more than twice.
📹 Paint Your Popcorn Ceiling (With THIS Tool)
Need Answers or Advice for your DIY Project? BECOME A DIY MEMBER NOW! Become a DIY Member by Clicking the Link Here: …
What are the pros and cons of popcorn ceiling paint?
Popcorn ceilings are a popular style for absorbing sound but can be difficult to paint and clean due to their texture. They can also mask imperfections. However, the biggest drawback is the presence of asbestos in the textured surface. Asbestos, used before 1978 for its flexibility, strength, and heat-resistant qualities, was banned by federal law in the late 1970s due to its carcinogenic properties.
Asbestos can cause mesothelioma, lung cancer, and asbestosis. Modernizing popcorn ceilings can be done through scraping, drywall, plaster, and paint. However, it is important to be cautious when painting popcorn ceilings to avoid potential health risks.
Is painting popcorn ceiling a good idea?
Painting popcorn ceilings is a modernizing technique that preserves texture and can give your ceiling a new life. However, it is a temporary fix if you are concerned about asbestos. Wearing proper protective gear, such as a dust mask and eyewear, and removing dust between ridges is essential. Popcorn ceilings need to be primed before painting to ensure proper paint adhesion. If stained, a stain-blocking primer can help prevent old stains from bleeding through. An oil-based primer is recommended to prevent water absorption and pull paint off the wall.
How long does it take for popcorn paint to dry?
It is recommended that the paint be allowed to dry to the touch and be handled after it has been recoated in a dry environment. The recoating process should be completed in 10 to 15 minutes, and the surface should be allowed to dry for a minimum of 24 hours before painting.
What is popcorn painting?
A popcorn ceiling, also known as a stipple ceiling or acoustic ceiling, is a ceiling with a bumpy surface created by tiny particles of vermiculite or polystyrene, providing sound-deadening properties. It was the standard for bedroom and residential hallway ceilings due to its bright, white appearance, ability to hide imperfections, and acoustic characteristics. In contrast, kitchen and living room ceilings are typically finished in smoother skip-trowel or orange peel texture for durability and ease of cleaning.
Popcorn ceilings were often filled with white asbestos fibers before the Clean Air Act banned asbestos in ceiling treatments in the United States. However, existing inventories of asbestos-bearing texturing materials were exempt from the ban, allowing asbestos to be found in popcorn ceilings applied through the 1980s. Textured ceilings remain common in residential construction in the United States, but their popularity has diminished significantly since the mid-2000s due to a trend towards more modern, clean-lined design features. Textured ceilings are generally less reflective of natural light, may harbor more dust and allergens, and may be more difficult to patch and touch up after drywall repair.
How do you paint a roof with popcorn?
To paint a popcorn ceiling, first test for asbestos, protect the room, clean the ceiling, cut in two inches with a paintbrush, test for previous finishes, load the roller with paint, apply the paint in a thin, even coat, and let the first coat dry. This is a simple and cost-effective way to refresh an older popcorn ceiling, which were popular between the 1930s and 1990s for hiding ceiling flaws and soundproofing between floors.
However, popcorn ceilings have since gone out of style, with most new builds opting for flat ceilings instead. Having popcorn ceilings in a home can decrease its value. For more information on how to paint a popcorn ceiling, read our guide.
What is the easiest way to paint a popcorn ceiling?
Using an airless paint sprayer for textured ceiling painting can save time, preserve the appearance, and provide uniform coverage. However, it is crucial to take proper safety precautions when operating spray equipment, such as wearing protective gear like gloves, safety glasses, goggles, spray sock, hat, proper footwear, dust masks, and respirators. Adequate ventilation is essential, and appliances should be turned off when painting near them. The specific instructions and safety procedures for the spray equipment should be followed.
Suggested tools and equipment include a Graco, Magnum, or TrueCoat Paint Sprayer, paint, spray tips, empty buckets for priming and cleanup, stir sticks, paint strainer bag, tarps, drop cloths, masking tape, paint brush, Magnum tip extension, pressure roller kit, additional airless hose sections, spray shield, pump armor storage fluid, cleaning rags, and stiff nylon brushes. Safety and protection equipment such as safety glasses, goggles, dust masks, and a spray sock or hat should be used to cover the head.
What is the best popcorn paint?
Popcorn ceilings can be painted with interior acrylic-latex paint, with flat or matte sheens for light bounce reduction. Eggshell, satin, or semi-gloss paint sheens are recommended for moisture protection. Popcorn ceiling options include painting, covering with thin drywall or wood planks, or removing the texture with warm water and a scraper. Painting is the least expensive and safest way to cover asbestos, while covering adds thickness and weight. Removing the texture with warm water and a scraper is messy but returns the ceiling to a flat state, but avoid if the texture coating contains asbestos.
How do you remove popcorn paint?
To remove a painted popcorn ceiling, spray a mixture of vinegar and water on the ceiling surface and use a 4-inch utility knife/type scraper. Popcorn ceilings, popular in the mid-70s and 80s, were installed to provide sound absorption or hide flaws and imperfections. If you have an older home with popcorn ceilings, you can remove them by covering them with new material like drywall, paneling, or decorative tin tiles. You can also remove the popcorn ceiling entirely.
Before proceeding, test the material for hazards, as any acoustic texture material manufactured before 1980 may contain asbestos. Disturbing asbestos can cause fibers to become airborne and trapped in the lungs, leading to serious health risks. Ensure that you understand the project before proceeding with it.
How do you cover popcorn paint?
Popcorn ceilings, a relic of the suburban housing boom of the 1960s and 70s, are often considered stylish in home decor. They were used in hallways and bedrooms for acoustic absorption or to hide flaws in ceiling construction. Skim coat and paint are the fastest and cheapest options for covering popcorn ceilings, providing a fresh, smooth surface for a new coat of paint. Tongue and groove ceiling plans, gypsum or drywall, can also be used to cover popcorn ceilings, saving time and money. Popcorn ceilings are not a timeless feature, but they can be a stylish addition to any room.
How do you fix popcorn paint?
The speaker employs a popcorn ceiling patch in lieu of spray popcorn paint, which is unwieldy and resembles oatmeal when lightly agitated following its initial dispensation.
Why would popcorn ceiling fall off after painting?
The application of latex over a popcorn ceiling can result in the degradation of the adhesive bond between the texture and substrate, leading to the detachment of the material from the ceiling. In such cases, the application of an alkyd primer can typically serve to mitigate the issue.
📹 Watch This Before You Paint Your House’s Exterior – Spencer Colgan
In this video, I suggest to you that you use a bonding agent on the exterior of the house that you are painting.
bag the entire room, all the walls at the ceiling line, with 99″ plastic, and spray the entire ceiling with flat, use an airless sprayer. I found this so much easier, and you avoid any problems that could occur when you apply the paint with a sleeve and a brush. You also avoid any lap marks or lines by spraying instead of rolling it
Hey Jeff, I just want to take a second to thank you sooo much for these articles. I have been able to take what I have learned from your articles and go down to florida and volunteer with a non-profit organization and help people get back on their feet whether it be demo work or helping them rebuild their homes. So thanks a ton and keep up the good work!
I repaired the popcorn ceiling in my spare bedroom. I used a roller and Dunn Edward’s primer and it actually matched the original color of the ceiling! Yes, it took about 3 gallons of primer to finish off the room. On a separate note, a roofing contractor put his foot through my other bedroom ceiling (condo) so they hired another contractor to repair the hole in the ceiling and painted it. He used a spray gun and it turned out krappy, but better than what was there before. My father was a painter and I learned from him not to use a spray gun if you can help it.
I stood on a portable aluminum ladder, used a medium roller, and painted it like I would any other ceiling, using and overlapping crisscross pattern. No problems, turned out beautifully. Most people can’t paint a ceiling steadily from the floor, unless it’s 7.5 feet or lower. My ceilings are slightly over 8 feet tall. That said, it’s easier for a homeowner, who isn’t a professional painter doing it everyday, to use a ladder. At least, that’s my experience, having remodelled 3 homes during my lifetime.
If you damp the roller ( soak in water and wrap it with your fingers the ok sign and run it across to drain out as much water as possible) your paint edges are smooth and flowing. It gets few minutes slower to dry and that’s great to overlap edges without seeing streak lines. I did that on my ceiling with just one coat, no visible streak lines. This is how fine artists do on canvas.
As a professional I refuse to do them. Almost every time I get large patches that become detached from the surface and goop up the roller as well as fall to the floor. The loose areas are probably already to drop and waiting to get a bit wet to make a mess. I have sprayed them before with perfect results but just find it easier to move on to another job.
I just did it!🙈😖 i applied white waterbased primer with the wrong roller on the popcorn ceiling in my room and it looks horrible🤦♀️ I still have hope it will look beter after paint and with the right roller. I hope i can find this foam roller here But what do you mean spray it if we mess it up? Spray with what?
Friendly tip! Hey Jeff, I would make it much easier cutting up their quick using the Gooseneck paint brush on a pole. Walk around the room in 10 seconds. Eliminates going up and down a ladder. I prefer 20 mil. One full roller will only get a span of 1 x 6. Don’t go over the same area or else it will peel off. Foam rollers clog up with stipple. Cheers! Don
Great article Jeff! I use those foam roller 20 years ago! Never like them. The loose stipple eventually fill the roller after a while. Paint pick up is less having to go to the tray more often. I prefer a 20 to 25 mil sleeve. Holds tons of paint. I just finished 2 bedroom ceilings today! Rooms 12×20 rolled one half then the other half. I agree, I only use FLAT paint for my ceilings! Cheers! Love your articles! The Gooseneck Guy!
I hate those “popcorn” ceilings. Our house came with it, and for years we dealt with it with cobwebs in the texture, dirt, dust, and raining down the “popcorn” crap. Finally was able to start a remodel and paint job to our rooms, and started to paint it with a roller, didn’t like how it was looking with the “popcorn’ still there, and decided to remove it. I took a simple 14 inch sheetrock blade that screwed to an extension, a spray bottle of water, and sprayed lightly, scraped, and took the junk off. A little Kilz primer, then flat white paint. Goodbye crap “popcorn”.
How do you get all of this stuff done? I work a fairly standard 40 hours. And try to work nights and weekends on projects around the house. I’m just constantly tired (mentally and physically) and can’t get enough done. Now with the cold (Wisconsin) and the dark I’m getting less done. I’m fairly young, in good shape, and handy. How do people find time and energy to get stuff done?
There is a danger to painting popcorn ceilings. Years ago, I painted them until one day i found the entire dining room ceiling hanging down in large strips. I painted, like usual, but a day or 2 later it was catastrophe! Now if you hate popcorn ceilings why then it can be a cheap way to remove popcorn ceilings! With the Internet now a thing, I learned that if you put too much latex on, the ceiling gets too wet and dissolves the bond between the texture and the drywall. There is a primer you can use to negate this I have just learned. Learned because it is time once again to face those ceilings.
I used the foam roller on my ceiling along with the recommended paint for a textured ceiling, guess what the ceiling turned brown, the texture fell off the next day, solution, I had to remove all the texture, lucky for me the joints were well done so, I painted the ceiling and to hell with a textured ceiling, who ever came up with it should be in jail.
Hi Jeff, thank you for this article. I will be starting popcorn ceiling painting soon. I did not find any link to slit foam roller. In Amazon, there is not much options to select from. Can you please provide the link and NAP size of the roller. I will be using either ProMar 200 or Spec Rite; both FLAT sheen. Please advise.
What about an unprimed unpainted popcorn ceiling? I knew going in that I was going to use more paint because it hasn’t been previously primed or painted. The issue I’m having is roller marks like crazy. Even after the second coat. I used a foam split roller and rolled in both directions and still have roller marks. You can only see the mark when looking at the ceiling from one direction. Looking from the other direction the ceiling looks fine. What do I do now? Should a 3rd coat fix it?
Far too complicated and too much work for me! My feelings will just stay yellowed and dirty until the day comes that I can pay to have somebody come in and take this nasty crap off of the ceilings completely! This was the worst idea anybody ever had for ceilings!! This junk is a nightmare to say the least!