Thinning paint for use in a spray gun is not necessarily difficult, but there are different ways to do it depending on the type of paint and sprayer you are using. To thin paint for use in a sprayer, you can use a paint thinner or reducer specifically designed for the type of paint you are using. Water can also be used to thin water-based paints.
Thinning latex paint is most likely necessary if you choose to use a paint sprayer. If you do choose to use a paint sprayer, you will need to thin the latex paint to get a fine spray. It can also take some practice to use an airless paint sprayer if you haven’t used one before. Add ½ cup (118 milliliters) of water for every gallon of paint and mix thoroughly. Check the thickness by running the paint through a funnel. If it flows freely through the funnel, you know the paint is thinned.
For airless sprayers, you should not need to thin paint as they work with oil-based paint and thinner paints, such as water-based latex, can clog the sprayer. Most water-based paints can be thinned using a product like Wagner Paint Easy, which is called a latex paint conditioner. Generally, you shouldn’t exceed 1 pint per gal.
If you do choose to use a paint sprayer, you will need to thin the latex paint to get a fine spray. Latex paints are made of new synthetic resins that are compatible with water, have a thinner consistency, and are wet enough for use in a spray gun. For airless sprayers, latex paint only needs to be thinned by about 10-15, or 1/8-1/4 cups of water per gallon of paint. The best ratio for thinning emulsion ready for spraying is 70/30, with some painters preferring an 80/20 ratio.
📹 How to Thin Paint for Paint Sprayer
This video demonstrates how to thin paint for a paint sprayer. The presenter uses a 3:1 ratio of paint to water as a starting point and then adjusts the viscosity by adding more water until the paint runs out of a viscosity cup in 25-40 seconds. The video concludes with filtering the paint and getting ready to spray.
📹 How Much Should I Thin My Paint For A Spray Gun
This video provides a simple method for determining the ideal consistency of paint for a spray gun. The speaker explains how to achieve a “melted milkshake” consistency by using a paint stick to test the paint’s drip rate.The goal is to find a consistency that allows the paint to flow smoothly through the sprayer while still adhering to the surface.
Add comment