Is Densglass Suitable For Interior Walls?

DensGlass® Sheathing, a commercial exterior board with a gold color, is known for its superior mold and moisture resistance compared to paper-faced sheathings. While it can be used for interior applications, it may not help insulate or make rooms cooler. DensArmor Plus Interior Guard is a better choice, but it cannot be used in cold climates. DensGlass is highly permeable, making it ideal for areas prone to high humidity.

Plywood and densglass can be used for wall sheathing and as underlayment for various purposes. However, DensGlass Sheathing is not intended for interior or exterior tile applications. For interior tile applications, consult the DensShield® Tile Backer brochure. DensGlass Sheathing should not be used in lieu of plywood where required and should not be applied below grade.

DensGlass Sheathing can be installed vertically or horizontally without sacrificing wall strength between studs. It also protects against dust and fibers, which may cause skin irritation. A contractor recommended using DensArmor interior gypsum wallboard instead of USG mold-resistant green board. DensGlass is excellent in residential units as a replacement for water or mold-resistant sheetrock and is less expensive than cement-based options.

DensGlass Sheathing and DensArmor Plus interior panels can be attached parallel or perpendicular to wood or metal framing, but use appropriate board orientation for specific fire assemblies and shear. DensGlass is not rated as a tile backer and is not rated as a tile backer.

What material is used for interior walls?

Drywall, a popular material in modern interior walls, is made of gypsum plaster between two thick sheets of paper and is affordable, easy to install, and fire-resistant. It offers a smooth surface that is easy to paint or wallpaper and can be repaired if damaged. Plaster, a traditional approach, was used for interior walls due to its soundproofing capabilities and smooth finish. It is harder and more durable than drywall but more expensive to install.

Modern plastering methods often involve a single coat over a special drywall called a blue board. Wood paneling and shiplap are alternatives to drywall and plaster that add character and warmth to a room. Wood paneling was popular in mid-century homes, while shiplap has recently made a comeback in the farmhouse-chic design trend.

What is DensGlass used for?

DensGlass® Sheathing, a popular substrate under brick, stone, stucco, siding, and EIFS, has a 30-year track record of providing protection against moisture during and after construction. It is suitable for a wide range of fire-rated and non-fire-rated building assemblies. DensGlass® Suite of products are industry-trusted, high-performing fiberglass mat gypsum panels suitable for wall, roof, ceiling, and floor projects. The company’s heritage in Gold is evident as the first manufacturer to create a fiberglass mat board and a relentless innovator of strength and moisture-resistant products for over 30 years.

DensGlass® Sheathing panels have scored a 10 for mold resistance under the ASTM D3273 test method, making it particularly suitable for soffits. In actual tests, DensGlass® Sheathing exceeded ASTM C1396 standards for humidified deflection by a factor of five times over the standard for paper-faced gypsum sheathing. The product specifications include thickness, width, length, weight, and humidity resistance.

Can DensGlass be used on roofs?

It is possible that roof system warranties may not apply when DensGlass Sheathing is used as a substrate. This is because some manufacturers may accept the use of DensGlass Sheathing if the membrane bonds satisfactorily, but not provide a warranty.

Can you hang DensGlass on a ceiling?

The use of DensGlass Sheathing is pervasive in the construction industry, employed in exterior walls, ceilings, and soffits due to its exemplary performance in a multitude of applications.

Can you use DensGlass for tile?

The DensShield® Tile Backer is available in two thicknesses, 1/4 inch (6. 4 mm) and 1/2 inch (12. 7 mm), and is suitable for floor applications. This is evidenced by its passing of the Robinson Floor Test, which is the industry standard for residential and light commercial ratings.

Can you screw into DensGlass?

The DensGlass sheathing should be attached to the framing using nails or screws, with the fasteners positioned at least 3/8″ away from the ends and edges of the sheathing.

What can I use for internal walls?

Internal walls can be made from timber, metal, or masonry. To support a new wall, it should be supported by a strong foundation, whether it is load-bearing or not. Timber or metal frame walls can be supported on existing floor joists by providing a double floor joist underneath or across the existing joists if they run parallel. If additional support is needed, it is advisable to consult a structural engineer or surveyor.

Masonry walls may require larger floor joists or a new beam. Concrete constructions may be difficult to determine their thickness and strength, so it is advisable to use the lightest possible construction.

What is the cheapest interior wall material?

Plywood is a popular choice for interior design due to its practicality and aesthetic appeal. Installation is easy, especially with a licensed contractor. Plywood is lighter and requires fewer screws, requiring less work. However, it is not very durable and may not last as long as other materials. Plywood is more likely to be damaged during strong impacts, so it requires careful movement. Plywood can be used as a drywall replacement in limited quantities, such as building accent walls. Wood has been used since the earliest days of building structures, and with biophilia still a major aspect of modern interior design, wood has not shown any signs of going out of style.

Where can I use DensGlass?

Due to its proven track record, DensGlass® Sheathing is a popular substrate for various building materials, including brick, stone, stucco, siding, and EIFS.

Can you use DensShield as drywall?

DensShield® Tile Backer is the first backer board with a built-in moisture barrier, designed to prevent damage to the sub-floor or wall cavity if moisture seeps through grouted tile. It is ideal for new construction, bathroom remodeling, pool areas, and other high humidity or wet areas. It is easier to handle than cement board and can be cut and installed like drywall without special tools or fasteners. DensShield Tile Backer conforms to the 2009 IBC/IRC Code for tile backer in wet areas and is available in convenient sizes, including 5/8″ Type X board for use in fire-rated assemblies.

Dens Solutions is industry trusted, high-performing fiberglass mat gypsum panels suitable for wall, roof, ceiling, and floor projects. It has scored a 10 in the ASTM D3273 test method, indicating no mold growth in a 4-week controlled laboratory test. When properly used with good design, handling, and construction practices, DensShield Tile Backer provides increased mold resistance compared to standard paper-faced wallboard products. The mold resistance of DensShield Tile Backer has been validated by UL Environmental.

Can DensGlass be used as a tile backer?

The popularity of DensShield Tile Backer can be attributed to its effectiveness in providing a moisture barrier and resistance properties for non-tiled walls and ceilings in a multitude of applications.