How To Reset A Kwikset Exterior Door Lock’S Pin Code?

To change the access code on Kwikset locks, follow these steps:

1. Keep the door open.
2. Enter Master code.
3. Press the Lock button once.
4. Press the Program button for the number of times corresponding to the programmed user code position.
5. If you cannot remember the user code position, perform a factory reset Kwikset lock to delete all codes associated with the lock.
6. Enter new user code.
7. Repeat the programming steps to enable User Codes.
8. Add One-Time Use Code: Up to 10 One-time User Codes can be saved.
9. Change the Default Mastercode: Make sure the door is open and in the unlocked position.
10. Enter the default MasterCode 0 – 0.

To reset all Kwikset Keypads and Smart locks to the factory settings, press and hold the Reset button for 5 seconds until three long beeps are heard.

\n

1. Enter the default Programming Code (O-O-O-0).
2. Press the Enter arrow.
3. Manually put the bolt in the extended (lock) position.
4. Press the PROGRAM button once, enter your new 4-8 digit code, and then press the Lock button.
5. Push and hold the reset button for 10 seconds until the lock beeps.
6. Unplug the Battery Pack.
7. Reinsert the battery pack and press and hold the Program Button.
8. Hold the button continuously for 30 seconds until a beeping sound is heard and the status LED flashes red.
9. Press the Program button once.

In summary, changing access codes on Kwikset locks is a simple process that can be done manually or through a factory reset.