How To Mount Shutters Outside On Aluminum Siding?

This guide provides step-by-step instructions on installing exterior window shutters for a simple exterior makeover. Shutter installation is an easy way to enhance curb appeal and can be done using plastic exterior shutter fasteners, also known as locks or plugs. To install shutters, drill pilot holes and fasten the shutters to the home’s exterior using the correct pair of shutters for each window. The guide also provides instructions on installing Perfect Shutters’ Decorative Duraprene Vinyl Shutters, specifically for louver and raised panel styles.

There are two methods of installing vinyl exterior shutters: using non-corrosive metal screws and using vinyl spikes. For brick, six 3″ deck screws and corresponding plastic anchors per shutter are needed. For vinyl and aluminum siding, drill a clearance hole through the siding only, not into the wall. Place the shutter back on the wall.

To install shutters on brick, remove the old shutters, measure the window size, use a pencil to mark the placement of the shutter hangers, and make holes in the vinyl. This DIY project can be a two-person job, so ask for help if needed.

Should I use shutter spikes or screws?

Two methods for installing vinyl exterior shutters are available: the use of non-corrosive metal screws or vinyl spikes. The utilization of screws is employed for the affixation of shutters to soft siding, whereas spikes serve to secure them to hard surfaces. It is imperative to adhere to the instructions provided for vinyl shutters in order to obtain precise specifications for pricing and ordering. The decorative shutter should be placed face up on a flat work surface.

Can you put shutters on metal siding?

Window treatments can be functional or aesthetic, providing additional protection against elements. Worldwide Steel Buildings offers design experts to help plan the best location and number of shutters for your metal building, from barndominiums to pole barns. They can help you create the perfect look by incorporating shutters into your metal building kit. Contact their steel building specialists for more information on shutters and other accessories.

How do you attach shutters to Aluminum siding?

To install louver and raised panel shutters, lay the shutter face up on a clean, soft, flat surface. Drill a ¼ inch diameter hole through the rail and in line with the holes in the tops, bottoms, and middle of the center cross member. Position the shutter on the house next to the window and mark the mounting hole locations on the building. Remove the shutter and drill a 1/8 inch diameter hole through the siding and into the wall at least 1¾ inches deep at the marks.

For Vinyl and Aluminum siding, drill a clearance hole through the siding only. Place the shutter back on the house and fasten it to the wall using the painted head screws provided. Be careful not to damage the screw head and not to over tighten it, as this will dimple the rail. Repeat this process for all remaining shutter panels. The mounting screws should go through the shutters and into the building.

How do you anchor shutters?

When installing vinyl shutters, it is advisable to leave a gap of approximately 1/4 inch between the window trim and the shutter, in order to accommodate future expansion and contraction.

How are exterior shutters attached?

Exterior shutters are installed on 2-3 hinges that sit atop “pintels” screwed into the window frame. Pintels come in three sizes: siding, brick, and rock. The wrong pintel may prevent the shutters from offset the right distance and keep them from lying flush on the house. Two hinges are enough for shutters up to 47″ height, but for extra tall shutters up to 95″ height, three hinges/shutter are needed for additional support.

The first step is to attach the shutter hinges to the back of the shutter, with each shutter having a mirror partner. It is recommended to flush the top and bottom hinges with the shutter to ensure correct pintel alignment. Next, secure the exterior shutter to the home by securing the first pintel into the window first, then slide the shutter into the first pintel, place the second pintel through the hinge, and screw into the windows reveal.

An S-Shaped piece called a shutter stay or shutter dog is used to hold the shutter open, installed in the bottom opposite corner directly to the home. For brick or rock, use lag anchors, while for siding, pre-drill a smaller 1/4″ hole and tighten the shutter dog in place.

Lastly, install a hidden metal L-bracket in the top opposite corner of the shutter to secure it to the home and keep the shutter open. Screw the metal bracket into the siding first with a 2″ screw, then drive a 2″ screw down into the top of the shutter.

Can you install shutters yourself?

The installation of shutters is a relatively straightforward process, even for those with no prior experience of DIY. The majority of customers are able to complete the installation of their shutters within a period of 60 minutes. To install, one must first select the appropriate window type and then download a step-by-step installation guide. In order to achieve a flawless appearance, it may be necessary to apply caulking. In the event of applying touch-up paint, it is recommended to gently wipe the surface of the shutter with the paint, particularly if a Limewash finish has been ordered.

How do you attach something to aluminum siding?

There are three methods to hang decorations on your house: a siding hook, a suction cup, or a wire hook. The most efficient method involves slipping the top of the hook underneath a piece of siding and wriggling it to “snap” it onto the bottom of the siding. The suction cup can be attached to the side of the house, cleaned and dried, and then pressed firmly to the siding. The hook should be left for a day before adding decorations.

The wire hook, made from the vinyl soffit trim, can be attached to the trim to hang items directly or attach fishing line to hang decorations lower on the walls. This method is suitable for hanging small items or string lights. It is important to choose a metal that won’t rust and ensure the hooks are not damaged.

What holds shutters in place?

Shutter dogs, also referred to as shutter holdbacks or shutter tiebacks, are designed with the purpose of securing window shutters to the wall when in an open position.

What screws are used for shutters?

Colour matched screws are standard 2 ½ inch steel screws with painted heads that match your shutters. They are supplied with white colour matched screws for white shutters. To install them, mark the locations for drilling and fixing the shutters, drill a hole smaller than the screw head, drill a hole that is the right size and depth to accommodate the wall anchor, position the shutter back on the building, and tighten the screws. These screws are not permanent, unlike shutter spikes, and are particularly useful for painted walls that require periodic maintenance.

What can you put over metal siding?

Stucco Flex is a spray-on option for a flat stucco appearance on corrugated metal siding or foam boards. Insulated stucco panels provide a durable and insulated finish in a variety of color options. The exterior of a steel building is of significant importance, as it plays a pivotal role in shaping the overall impression and integration within the surrounding context. Given the plethora of available options, it can be challenging to determine the optimal starting point.

When should you not use exterior shutters?

Shutters are not necessary for every window, as they should cover the entire window when closed. Double-mulled, picture, bay, and most dormer windows should not have shutters. If shutters aren’t affordable, adding shutter hardware can be a simple detail. Mismatched windows can appear sloppy, especially with differing muntin patterns. Some muntin patterns are endemic to certain architectural styles, so “Prairie” muntins should be avoided unless the house is of the Craftsman, Arts and Crafts, or Prairie style. Adding shutter hardware can add a touch of elegance to a house.