How To Make Ancient Wooden Outside Doors Draft-Proof?

To combat drafts around doors, apply weatherstripping to the sides and top of the door frame, install new door sweeps at the bottom of the door, check for gaps between the door and the threshold, and adjust the threshold if necessary. Consider adding a storm door for an extra layer of insulation. Before ordering weatherstripping, measure the gap between the door and jamb and the door and stop with the door closed. Choose weatherstripping for each side that’s big enough to fill the largest gap along its run (3/8-inch maximum).

Draught-proofing external doors can help cut energy costs by eliminating drafts and stabilizing indoor temperatures. Weatherstripping also makes your living space quieter and protects your home from draughts. To draught-proof a door, follow the steps below: Draught Strip Installation for Door Perimeter. Brush strips or hinged flap draught excluders are highly recommended for sealing gaps around the edges of your door. Self-adhesive foam draught strips are the most common DIY solution to draught proofing front doors, creating a seal at the closing edges of your door.

To seal the top and sides of an external door, use self-adhesive strips made of rubber, foam, or brush. Another option may be to have polycarbonate sheets made up and held in place with magnetic tape. Drive 30mm screws through the holes in the threshold into the wood. Run a thin line of silicone along the flat area underneath the door.

In addition to installing weatherstripping, consider upgrading your door by buying a purpose-made cover that drops a metal disc over the keyhole. Use a letterbox flap or brush, but remember to measure the gap. Finally, clean the door frame, remove existing seals and threshold, and install a new low-rise threshold at the door.