How To Disassemble A Holiday Tree With House Accents?

To disassemble a pre-lit Christmas tree, follow these steps:

1. Connect the light strings of the tree together and plug the adapter into a wall outlet. If the tree comes with a foot pedal, step on the On/Off button. Place the Tree Stand (F) flat on the floor and insert one Pole Section (E), with big end down, into the tree.

2. Before disassembling the tree, unplug it and remove all ornaments and decorations. Do not pull on the cord when unplugging the tree. Gently lift the tree top straight up to remove from the center section and fold all branches towards the pole. Repeat this step for the center and bottom tree sections.

3. Remove the top section by twisting back and forth slightly to loosen the connection. There may be small light connectors between each section of the tree. Unplug these after loosening the top section.

4. Place the top section in the storage box or container that you plan to use. Disassemble the middle of the pre-lit tree by following the instructions provided in the Home Accents Holiday TG90M5311L03 manual.

In case the item still doesn’t work, contact SVI Customer Service at 1-855-428-3921, email [email protected], or call Home Accents Holiday.

\n

1. Before disassembling the tree, make sure to remove all ornaments and decorations as they can become crushed as branches pile on top of each other in storage. Spray WD-40 into the point where the poles meet, let it soak in, and then try wiggling the tree apart.