To replace a Toyota exterior door handle, follow these steps: 1) Order an OEM replacement exterior door handle. 2) Gather necessary tools, 3) Remove the door panel, 4) Install the new door handle, and 5) Put everything back together.
For a 2014-2019 Toyota Corolla, follow these steps: 1) Identify your Corolla’s model and year to ensure the new handle fits properly. 2) Choose between an OEM handle for a guaranteed match or an aftermarket replacement. 3) Choose a compatible replacement handle for your Corolla model year. 4) Find these at your local auto parts store or online.
For a 2016 Toyota Corolla, use a screwdriver to pry open the switch panel and pull it forward. The switch panel should be disconnected. 5) Remove the Phillips screw in the inside door and remove the 2 10mm head bolts from the door handle. 6) Remove the rod on the door handles.
In summary, replacing a Toyota exterior door handle requires identifying the model and year, choosing an OEM handle, and removing the switch panel. It is recommended to use an OEM replacement handle for the best results.
📹 Toyota Corolla 1995–2002How to Replace Rear Outside Door Handle
Toyota Corolla 1995–2002 How to Replace Rear Outside Door Handle ❱❱How to instal android app …
📹 2014-2019 Toyota Corolla REAR Outer Door Handle Replacement
2014-2019 Toyota Corolla FRONT Door Handle replacement: https://youtu.be/-1Meq8HiadY DEWALT Mechanics Tool Set, SAE …
I tried following your article to replace my exterior left rear door handle. I tried for hours this past week. I Couldn’t access the left bolt to remove the handle. So I broke off the handle from the outside. But I couldn’t get to the bolt for reinstallation. Finally figured out that I didn’t have the circular hole in my door, not the one you had in your article. Circular indentation where the hole should have been cut. Is it common for Corollas of the same year to have door templates different?