How To Apply Texture Paint On Interior Walls?

Textured walls can be created by dipping a sponge in paint and blotting it on the wall, or using a wall texture like chalk wash, concrete, or rust effect. Textured paint is an alternative to traditional flat paint that can conceal dirt and flaws and create a unique design on the walls. It can be achieved before the paint is applied or during the application process. Texture grades range from very fine to coarse.

To add a physical texture to your walls, you will need to know how to texture walls with paint additives or a pre-textured paint. To do this, follow these steps:

1. Assess the wall texture.
2. Clean and repair the walls.
3. Tape the edges.
4. Prime the wall.
5. If you are unsure if the current paint is water-based, glossy, or both, apply a primer. For best results when painting textured walls, start off at the edges and cut inwards.

To add texture to your walls using wallpaper, joint compound, textured paint, and faux finishes, follow this DIY guide from True Value.

When applying textured walls, apply a coat of primer in “W” shaped strokes for maximum coverage. Use a good paint brush for faster and more efficient work.

In summary, adding texture to your walls can be achieved through various methods such as drywall compound, joint compound, and tactile wallpaper. To achieve the desired look, follow these steps and use the right tools and materials.

What kind of paint roller to use on textured walls?

The selection of roller covers depends on surface texture and environmental factors like temperature and humidity. For uniform interior surfaces like drywall, cabinets, and metal, use roller covers with smaller nap sizes like ¼-inch WhiteDove™ for a smooth finish. For walls, ceilings, paneling, lightly textured walls, decks, concrete, and textured ceilings, use ½-inch nap. For outdoor jobs or rough interior surfaces like cinder block, rough wood, and brick, use roller covers with higher nap like 1-inch GoldenEagle ™ for greater paint pickup and faster application. Woven roller covers are most compatible with paints and primers with glossier sheens, while knit roller covers are best for oil- or water-based paints due to their open fabric construction.

What is the best primer for textured walls?

Drywall primers are essential for different surfaces. Latex-based primers like Sherwin Williams’ “Premium Wood and Wall” Primer/Sealer are suitable for smooth or textured interior surfaces. Oil-based primers like KILZ’s Original Multi-Surface Stain Blocking Interior Oil-Based Primer are suitable for textured surfaces like popcorn ceilings. Porous surfaces like drywall joint compound and masonry require a primer that can penetrate and seal. High-quality primers like KILZ Adhesion High-Bonding Interior/Exterior Latex Primer are ideal for surfaces that are difficult to paint.

How do you finish textured paint with a roller?

To add texture to paint, use a paint roller with thick, shaggy fibers. Apply a base coat, let it dry, then roll on a second thick layer of paint. Clean the roller and roll over it again to create a subtle textured finish.

For a textured wall, apply a base coat, let it dry, then apply a second thick coat. Use a brush to create a pattern across the top, using coarse bristle paint brushes for a subtle wood grain effect.

Add texture to paint with a sponge or cloth. Dab on the second coat of paint using a large sponge or scrunched-up cloth after the base coat is dry. If the first coat is thin or streaky, apply two layers of base coat to ensure even coverage.

Can you use a roller with textured paint?

Looped plastic naps, used on rollers like the Wooster specialist roller, create a decorative stucco effect when using thick, textured paints with compound additives like sand, joint compound, or limestone. These rollers are best for rougher surfaces. To achieve the desired textured finish, homeowners should choose a paint specifically designed to leave behind texture. The best textured paint depends on the desired finish and the surface porosity.

There are various options, including grainy, clay, stone-like, or chalky limewash paint formulations. Mixing additives into standard paint can also create a heavier texture and minimize the need for additional coats. Perlite can also be added to achieve a sandy texture.

Is it better to spray or roll textured walls?

Spray painting provides a uniform finish on textured walls due to its capacity to effectively reach into crevices and uneven areas, which rollers are less adept at doing. However, it may prove challenging to achieve a uniform finish on textured walls with intricate textures and deep recesses, or when attempting to paint patterns. Furthermore, the control of overspray may be more difficult to manage. It is essential to implement the appropriate precautions to regulate the dispersion of paint and safeguard adjacent surfaces from unintentional coating.

Are textured walls harder to paint?

Painting textured walls, such as stucco, knockdown, and orange peel, can be challenging due to the intricacies of the surface. Traditional paint brushes struggle to penetrate these peaks, valleys, and nooks, resulting in bare patches. However, with proper preparation, paint product, execution, and patience, a high-quality finish can be achieved.

1. Assess the wall texture. Different textures require different approaches to painting. Heavy stucco may require extra preparation, while lighter walls may require less.

2. Choose the right paint product. The right paint product will help you achieve a professional finish. For example, heavy stucco may require more preparation, while lighter walls may require less.

3. Follow the step-by-step guide for painting textured walls. By following these steps, you can achieve a professional-looking paint job every time.

What sheen of paint is best for textured walls?

To paint textured walls, choose the right paint product, such as latex or oil-based paints with easy-to-maintain finishes like satin or semi-gloss sheen. Apply the paint using an angled brush to reach into the nooks and crannies of the wall for solid coverage. After finishing the edges, use a ¾’ to 1′ roller to paint the rest of the wall in small sections, working in a “W” motion. It may take multiple coats to achieve the desired coverage and look.

Follow the paint guidelines on the back of the can and let each coat dry completely before applying the next coat. Remember to follow the paint guidelines on the back of the can for the specific product used.

Does wall texture go on before primer?

It is recommended that the texture shirt be primed after the application of paint, as it has the potential to absorb more paint and may exhibit a different appearance if there is bare drywall behind it.

Can you paint directly over texture?

Priming is crucial for painting over textured walls as it helps in adhesion and acts as an initial coat. A deep-pile roller is used to cover tricky spaces. Painting over textured walls requires more paint than smooth surfaces, so it is recommended to purchase twice as much paint as usual. Apply generously and plan for two coats total.

Some areas may not blend with the rest of the wall, but this is normal. Take the time to examine the initial results in different lighting setups and angles. If you miss anything or notice any area is lacking, use leftover paint to touch up those spots. This ensures a smoother surface and prevents paint from running out during the process.

What is the best paint brush for textured walls?

Black China Bristle brushes are ideal for textured surfaces due to their stiffness and durability. However, they are not suitable for rough surfaces due to the risk of breaking the tips off natural bristle brushes. A synthetic nylon brush is recommended for this application, even with oil-based coatings, due to its high durability and resistance to wear. The Wooster Brush Company offers quality brushes for various coatings, but different brushes excel in specific applications.