TypeSauto.com offers a variety of LED lighting kits, including the Instant Plug and Glow™ 96″ LED Lighting Kit, which features two 12″ and two 36″ LED light strips, four 48″ extension wires, and multiple power options. The TYPE S App-Controlled 120″ Smart Exterior Trim Lighting Kit comes with color-changing LED lights and an easy-to-use app for a custom lighting experience.
The Smart LED Exterior Lighting Kit from TYPE S includes multicolor LED light strips and a smart hub controller for a custom lighting experience. The kit can be applied almost anywhere and can be expanded up to 12ft. It is suitable for cars, boats, trucks, SUV’s, RV’s, and motorcycles.
TypeS Auto LED Lighting Kits provide easy installation and complete customization, allowing you to fit out your car faster. The kit includes power adaptors, cables, and the TYPE S Plug and Glow™ App-Controlled 24″ and 48″ Smart LED Kit, which allows you to customize and control interior vehicle lighting with the tap of your finger.
Installing the adhesive white LED light kit is easy. For the TYPE S Plug and Glow™ Hyperbright™ 24-inch LED Kit, plug the lights into the provided adapter, trim it down to fit your car, peel away the adhesive backing, and press the strip into place for a few seconds before releasing. The kit is made of flexible rubber tubing and comes backed with 3M VHB adhesive tape for secure mounting.
Installing the Smart Hub requires 12V power only, choosing your desired location for the hub, cleaning the surface thoroughly with isopropyl, and replacing the bulb.
📹 Type S Plug and Glow Interior Light Kit Installation
In this video, we explain the installation of Type S Plug and Glow Interior Lights. Add some character to your ride with the Instant …
How hard is it to install underglow?
Installing LED Under Car Lights is a simple process that involves securing each strip to the outer edges of the vehicle underside and extending the wires up to the engine bay to power them. Before proceeding, clean the areas to be attached, including the underside of the front/rear bumpers and side skirts. If you have a hydraulic jack, it increases efficiency as you can jack up the car for more access to the underside.
The set of LED strips has been redesigned to allow for either individual installation by routing each wire to the module box in the engine bay or by connecting the strips together with their respective adapters. All four pieces have interconnecting adapters, allowing them to receive power from the battery without the need for an extension cord.
How to connect to type S hub?
It is recommended that an additional fuse be installed in order to ensure the safety of the lighting circuit. This can be purchased from a local automotive parts supplier. The lights will power on with the included hardwire.
Why won’t my LEDs connect to my phone?
Bluetooth LED controllers can sometimes malfunction or break, causing issues like connectivity problems, app problems, and lights not working. These issues can be caused by distance from the device, interference, or damaged Bluetooth antennas. However, most Bluetooth LED controllers can be easily fixed through DIY projects. To troubleshoot these issues, check connections, try a different power source, update firmware and app, reset the controller, test for interference, and replace batteries. Ultimately, the goal is to ensure your LED light strips work properly and work seamlessly with your phone or tablet.
Why won’t my LED lights turn on when I plug them in?
The malfunction of the LEDs is likely attributable to a defective power supply. In the event that multiple power supplies are employed, it is recommended that a different one be utilized on the identical strip. If the device functions as intended, it can be concluded that the power supply is defective and requires replacement. The RGB/W LEDs are exhibiting a low red glow due to a 12V power supply being connected to 24V LED strips.
Why won’t my type S LED lights work?
It is possible that the Smart Hub is experiencing difficulties as a result of an inadequate power supply, an incorrect password entered into the application, or a disruption in the power supply. To resolve these issues, it is recommended that the power connection be checked, that the status of the Smart Hub LED be observed, and that the password be reset.
Is underglow safe?
LED or neon underglow lights for cars are legal in some US states, but with safety restrictions. Blue, red, and green lights are generally prohibited, along with flashing effects. Most states allow showing off sick underglows away from public areas and highways. Modifying a car can raise insurance rates, so it’s important to have the right auto insurance guidance. Way offers the best coverage and offers unbeatable deals on city and airport parking, auto insurance, auto refinance, car wash, gas discounts, EV charging, and more. Use Way+ services for the best service all around.
What does Type S stand for?
The Type S designation signifies a performance-oriented design philosophy, necessitating that all Type S models adhere to exacting standards for enhanced acceleration, deceleration, and maneuverability.
Is type S faster than type R?
Despite a slight reduction in power, the Civic Type R demonstrates comparable performance on the test track, including a similar quarter-mile run time, due to the use of Pilot Sport Cup 2 tires and slightly stickier factory-installed rubber.
Why type S and not type R?
The Type S model superseded the Type R, offering a more contemporary array of features. During the period between 1997 and 2001, the Type R was utilized for the Acura Integra Type R, representing a performance vehicle.
How to pair type S LED lights?
In order to set the password for the Smart Hub, it is first necessary to ensure that the Bluetooth function of the mobile device in question is turned off. Alternatively, the reset button on the Smart Hub Controller can be pressed for a period of three seconds, or the car battery can be disconnected. It is then necessary to follow the instructions displayed on the screen in order to set the password. It should be noted that changing the password without connecting to the Smart Hub may result in an invalid password being generated the next time the app and Smart Hub are activated.
How much is an underglow install?
The financial outlay for a professional underglow kit installation can range from $250 to $600, contingent upon the specific kit and the duration of the installation. The majority of mechanics charge an hourly rate of $100, therefore it is reasonable to expect to pay a minimum of $100 in addition to the cost of the kit. Despite the financial outlay involved, the installation of an underglow can result in savings of over $800 per annum, which may be offset against the cost of the installation through a reduction in the insurance premium.
📹 Type S Exterior Smart Light Kit Installation
We walk you through a basic installation of the Type S Exterior Light Kit on a Dodge Challenger. Part # : LM55878-1 For more …
If you guys do an app update, it’d be great to offer a sensitivity function for the music setting. I have a big system and if I turn it up, the lights pretty much flicker but stay on. The hub is mounted behind my dash so basically as far away from the speakers as possible. If theres already some tips people have figured out for this issue, I’m all ears. Thx.
damn type S auto im disappointed I buy the 2 LED strip starter kit for 50 dollars just for rainbow music mode assuming there would be a rainbow color option on top of the solid color that you can pick from the color wheel but nope the only way you get rainbow is the prism mode, while I know the dirt cheap ones on amazon will do exactly that and actually come with 4 strips for $15 with everything needed included why not have that as an option I know they’re capable of it like shit it said have 8 presets favorited why bother if you wanna change the color and modes swapping favorites is as easy as just picking a new one on the app. I thought it was like a razer multi color mouse or keyboard where you pick what colors you want to be on the rotation so for example you could have only red blue and purple on a loop, then you pick fade or strobe, not just lame solid colors that cheap ones would do for a third the price and double the LEDs while the device itself is completely capable of doing that, and if the hardware is too limited to be able to pick your own colors to put on a loop its definitely capable of having a rainbow color option at least for the music mode. Its sad because I like these and think they’re better than the cheaper ones, but missing out on the one thing I wanted from it is a huge letdown but still good LEDs definitely wouldn’t recommend them due to the price and limitation, but definitely better build quality than the cheap ones and I immediately would recommend them and probably buy 2 more strips for my back seat if the TYPE S app made it possible for rainbow music mode, they’d be a steal if you could pick what colors to loop, but until then I get one color music mode or just prism mode
Ok, so the other day, I was able to change the modes of my led smart hub in by car. It switched to music mode just fine, then I put them back to prismatic. Problem is when I access the app even when Bluetooth is activated, I can’t switch from prismatic, the smart hub is just stuck there. I can’t just choose glow or music, anything for that matter. The blue light in the box is flashing if that makes a difference.
I hope you guys see this and take it to heart, I want to purchase all the lighting systems you have so that I can control my lights with just one app. Wish the type s app was just that each time you add a part of the system it becomes a new “zone” instead of open the app select the brain type control that back out select a new brain type control that and so on. Why not just one menu to control it all? Why not use the same hub for interior and under lights? Why not use the same water resistant plugs as the fog lights? And why sell the under lighting kit with just two 36 inch strips when every other under lighting kit comes with four? Don’t get me wrong I have the fogs and fell in love with them the second the turned on the first time, they look beautiful. But for people like me who really enjoy having all the after market lights there should be some continuity between the systems. So as soon as you buy one they can all be expanded to work with each other.