The average cost for hardwood floor refinishing is between $1,098 to $2,653, with a national average of $1,869. Factors influencing the project price include the size, shape, and style of the floor. Sanding the main part of the hardwood floor with a drum or belt sander with 40-grit sandpaper is essential, maintaining about six inches of space around the perimeter of the wall.
The average cost to refinish hardwood floors is about $1,850, with a range of $1,150 to $2,500. The cost to refinish a floor usually costs $1,000 – $2,500, and the price ranges from $3 to $8 per square foot. Compared to the price of a new hardwood floor, this is a bargain.
The cost of sanding a wooden floor is on average between 25 and 35 euros per square meter, including materials and labor. Refinishing hardwood floors on your own typically costs between $215 and $600, including rental equipment like sanders ($80-$130/day). Nationally, the average cost for refinishing a hardwood floor is $1,883, within a typical range of $1,101 to $2,666.1.
The average cost to sand, restain, and refinish wood floors is $2 to $7 per square foot, with refinishing hardwood stairs costing $25 to $85 per step. On average, it’ll cost you between $3 and $6 per square foot to refinish these floors if it’s doable.
Mahogany is one of the hardest woods used, and most homeowners pay an average of around $4,500, but costs could vary between $2,500 and $7,300 depending on what species of wood you choose.
📹 Beginner Guide to Refinishing Hardwood Floors on a Budget (I Saved Over $4,000)
Step by step beginner guide to refinishing hardwood floors on a budget! Refinishing the floors myself saved me over $4000This …
How much does it cost to stain wood floors?
The cost of hardwood floor refinishing varies depending on the type of refinishing and the type of wood used. The average cost for a 200-square-foot space is around $1, 200, but this can vary significantly depending on factors like floor size, wood type, and the condition of the existing flooring. Refinishing hardwood floors can restore their luster and provide a fresh, revitalized aesthetic. Factors that impact hardwood floor refinishing projects include the type of refinishing, the cost of coating, staining, sanding, and topcoats. The cost figures in this article are based on 2024 reports from Fixr and HomeAdvisor. The guide provides recommendations for finding the right professional for your project.
Is it cheaper to re sand hardwood floors?
Refinishing hardwood floors is a cost-effective alternative to replacing and reinstalling them. It involves sanding down the first layer of wood, restaining, and sealing it to extend the life of your flooring. However, this process only applies to actual hardwood floors, as engineered and laminate floors have a shorter life. Refinishing can be done multiple times, but engineered floors can only withstand it once or twice, and laminate floors cannot be refinished.
The average cost for refinishing hardwood floors is around $1, 850, with a range of $1, 150 to $2, 500. The cost may increase if you have small spaces, such as closets or powder rooms, as sanding equipment is often larger and more difficult for professional refinishers to work in. Overall, refinishing hardwood floors can restore their surface for a fraction of the cost of replacing them after years of damage.
Is it worth it to refinish old hardwood floors?
Refinishing is a popular choice among homeowners seeking to restore floors to their original condition and quality. Nevertheless, there are instances when refinishing is not a viable option. This may occur when split or buckling planks with significant water damage necessitate a more thorough examination of the underlying frames and subfloors. Similarly, instances may arise when wiggle planks result in gaps between floorboards.
Can I stay in my house while floors are refinished?
Refinishing hardwood floors can be a rewarding experience, but homeowners often wonder if they can stay in their homes during the process. To ensure a smooth refinishing, homeowners should clear the area, secure openings, remove base moldings, manage dust, and ensure the room is vacant. This includes removing furniture, rugs, and other decor, and sealing vents and apertures with electrical tape. Base moldings should be removed for an even and comprehensive refinishing.
Hanging plastics around the refinishing zone can help limit dust spread. Furniture should be removed to ensure an unobstructed workspace, as leaving it within the workspace can impede the task and risk damage. If space is a constraint, temporary storage or relocation is recommended.
How many days does it take to sand and stain hardwood floors?
Wood floors, known for their timeless charm, may lose their luster over time and require refinishing. The average hardwood floor refinishing project is around 800 square feet and takes 3-5 days to complete. The process involves several steps, including moving furniture, covering cabinetry with plastic, and preparing the space for a slightly dusty work environment. The process depends on various factors and depends on the specific needs of the project.
How much wood does sanding remove?
The amount of stock an abrasive can remove depends on the grit size. A three-head sander can remove around 1/32″ of material in one pass, depending on the amount of stock needed and the final grit finish. To calculate the number of heads needed, consider the stock removal and final grit finish. The abrasive belt speed is crucial for optimal performance and stock removal rate. The SFPM (slicing speed) refers to the relative velocity between the abrasive belt and the workpiece surface. A faster belt results in a higher cut rate, so it should be run as high as possible for each application to increase production while generating minimal heat.
How many mm does floor sanding remove?
The company specializes in sanding boards, removing less than one millimeter from the top, allowing for multiple sessions over its lifetime. The process starts with coarser grits for worn surfaces and progresses to finer grits for a flawless finish. The sanding sequence ranges from grit 24 to 150, ensuring uniformity and precision. The company also offers a unique wood dust and resin blend for gaps under three millimeters, but recommends sliver filling for suspended floors for long-lasting results.
How much does it cost to have a floor professionally sanded in the UK?
Wooden flooring restoration typically costs between £4 and £25 per square metre, depending on the type of restoration needed. Sanding a 10 square metre space costs £120 to £160, while sanding a 30 square metre room costs £360 to £480. For a complete floor refurbishment, sanding and oiled costs £18 to £23 per m2, while sanding and varnishing costs £15 to £20 per square metre. Other options include staining to improve wood color and gap filling costs between £4 and £25 per m2.
Can you sand a floor too much?
Over-sanding can lead to significant wood loss, so it’s crucial to consider the depth and duration of refinishing. If the issue persists or you’re concerned about potential damage, consult a professional flooring contractor for further guidance. Visible marks can also arise during refinishing, often caused by improper technique or a malfunctioning sander. To fix these marks, identify the affected areas, re-refinish using a slightly lower grit of sandpaper perpendicular to the marks, gradually increase the grit, vacuum and wipe down the refinished area, and inspect the floor to ensure the visible marks have been successfully removed. If necessary, repeat the refinishing process with higher grits until the surface is smooth and uniform.
How much wood does floor sanding remove?
It is possible for flooring professionals to sand wood up to 1/16 of an inch with coarse paper. However, it should be noted that some engineered floors may not be able to withstand multiple heavy-duty sandings due to the thinner surface veneer. Furthermore, the process of refinishing such floors on multiple occasions may result in wear-through.
Can you walk on hardwood floors after sanding?
It is important to note that floor finishes are more susceptible to scuffing and scratching until they have undergone a sufficient curing period. It is recommended that stocking feet be walked on the floor for a period of approximately three to four hours, and that furniture be placed back on the floor for a period of approximately 48 hours without dragging.
📹 Refinishing HARDWOOD FLOORS|6 things you MUST know before refinishing HARDWOOD FLOORS
There are many things to consider when professionally refinishing your HARDWOOD FLOORS. Wonder what type of …
Had a company give me and my wife a quote of 4,5000 and change to do our downstairs and upstairs hallway and bedrooms.Much like yourself we live in a older historic home and we have plenty of work the home needs so to save money so it can be put towards other projects were thinking of just doing a screen and recoat ourselves.Great how to article and your floors turned out really nice also.
Refinishing floor in 2024 in Illinois costs about $2.50sf. including 2 coats varnish and extra $1.20sf. for stain color. However if the floor is less than 300sf. flooring company will charge you extra. Tip. if you use water based finish you should use sealer first than minimum 2 coats water based finish.
I grew up in a 1903 house with pine floors. We had dark blue carpeting everywhere (came with the house) till I was 18 then took up the carpeting and the floors were in great shape to we didn’t refinish them. They needed refinishing by the time we moved around 14 years later. Pine doesn’t hold up well. Pretty though.
I have parquet flooring in my new house but the previous owner didn’t like it so he applied many layers of stain to hide the parquet making the floor look painted. I considered attempting to refinish it myself since I don’t like the current look and he did a poor job. Do you think this process could work to remove stain that has been applied so heavily?
How are you going to gloss over the removal of the carpet glue!? I pulled the carpet out of my basement, which was glued to real linoleum, and the Mrs and I tried every kind of scraper we could get our hands on, didn’t work, tried various chemical floor strippers, didn’t work. The only thing that worked was baby oil and scrapers. It had to soak over night and it took a week to do it. 1,800 square feet of linoleum was cleaned this way. Neat thing was we found a 20 something foot long shuffle board layout in the linoleum floor! We’re onto the sanding of the hardwood upstairs now, built in ‘56 every room but the kitchen and bathroom.
Please help! How do you we keep the roller from leaving tiny bubbles in the finish? We’re having a tough time. My wife and I did a great job on stripping the floor to the bare wood BUT cannot get the sealer go on evenly. If we do, we have bubbles. The floor is splotchy right now. I have to re-rent a floor machine to sand the finish coat back off.
I varnished my unfinished wooden floor with oil varnish and it turned the floor yellow. I hated it as the wood looked beautiful pale. I tried sanding it out and it didn’t work. Is there anything I can do to bring it back to its original colour? I only found out about Decorators varnish dead flat after I had applied the oil varnish. I’m gutted.
as you did do a pretty good job in general, man! people! please do not listen to somebody on the internet tell you, you can stain at the 100 grit stage. you’ll regret every bit of work you just did and redo it. 100 grit cut is nowhere near enough. specially 80 grit cut with the edger. you’ll see every single swirl
Nice work! I would like to refinish my 2 hardwood floors at some point, both are OLD but in great condition. 1 of floors has a tiny bit of carpet pad residue, neither look like they have much if any clear top coat, both floors have stain that matches the baseboards and window trim and the stain still looks pretty good, neither floors looks like it has filler as I can see gaps between the wood pieces, I also noticed that both floors have a few creaks (I believe the creaks are maybe caused by wood piece slightly flexing when one end is stepped on).
I am a professional floor refinisher and I thought you did a very fine and accurate article on the subject. I am glad to see that you presented the facts vs the biased opinion. Top notch information. The only thing I would add is the out gasing of chemicals during the curing time. The reason I use the Bona product is because of the fact that it is 100% cured in 3 days. So it is only out gasing chemicals for 3 days vs 1 to 2 weeks for other water based finishes. Even though there is not much odor to the finish it does have chemicals that I can not pronounce. So my recommendation to my clients is that the may want to vacate the premises during the curing time as well. Especially if they are sensitive to that sort of thing. Also I recommend scrap leather cut out and attached with contact cement to movable furniture. Like dining room chairs. Felt is very hard to keep attached to movable chairs and when it does come off. Oops now you have a scratch.
Nice overview. I’m about to tackle my 1970s kitchen I’m remodeling. The oak floors turned an ugly orange/amber color, just in the kitchen and front hallway. Both have some minor water damage from typical traffic (poly has lifted up a bit)… not bad considering the house is nearly 50 years old and never had a floor re-finish job. The rest of the house has a med-brown color and has lasted great with no need to re-do. I’m leaning towards a natural color or very light brown to contrast the family room, dining and living room darker color.
Thank you – very helpful article! I’m curious – if the rugs can leave an impression and you have to wait a couple of weeks for it to cure, what should one do if they’re moving into a house for the first time after refinishing. It will be only about a week after refinishing and there will be stacks of boxes and furniture set down that might not be in the right place right away. What should I do?