Does The Interior Of Ames Blue Max Work?

Ames® Blue Max is a highly elastomeric liquid rubber that is ideal for interior and exterior waterproofing of basement walls and foundations. It is suitable for poured concrete, tar coated walls, brick or block walls, interior and exterior basement walls, pressure treated plywood, sheet metal, plastic, and precast. The product is water-based, strong, and highly adhesive, with 1200 elongation that moves with the surface to resist cracking and peeling. It is recommended to apply two gallons per 100 sq. ft. or two coats as needed for walls, and three gallons per 100 sq. ft. on interior wall surfaces.

Blue Max is slightly tacky and may be top coated on roofs with Ames’ Maximum-Stretch, and on basements. It is certified for not only interior wall application but also exterior below grade, handling wood, concrete, and masonry surfaces with the same aggressive, tough bond. It goes on a light blue color and dries to a darker blue before proceeding with the next coat. Ames® Blue Max Regular Grade and Block and Wall Liquid Rubber can be applied with a paint brush, a push broom, a low nap roller with a long handle, or a paint brush.

Ames Blue Max White is a strong and highly adhesive elastomeric liquid rubber waterproofer with 900 elongation that resists cracking and peeling. It is suitable for roofs, interior, and exterior walls. It is high in solids and dries to a tough 1200 elastic membrane that resists cracking and peeling. It flows into cracks and crevices as a liquid sealant and is suitable for damp basement walls.

In summary, Ames Blue Max is a versatile and effective liquid waterproofer that can be used on both interior and exterior surfaces. It is suitable for damp basement walls and can be applied using various tools such as paint brushes, push brooms, low nap rollers, or other tools.

Can you tile over blue Max?

The Super Elasto Barrier is a 100% liquid rubber waterproof coating, while the Blue Max is a liquid rubber and acrylic coating with a higher adhesive quality and the ability to tile over it.

How to use Blue Max?

Ames’ Blue Max is a water-based liquid rubber that offers protection against hurricanes and storm damage. It is easy to apply and can be cleaned up with water. Ames Research Laboratories, Inc. has recently released testing on a new technology that can protect structures before and after hurricanes. The impervious science technology breaks the barrier, sealing and protecting wood, siding, wafer wood, and plywood. Ames Blue Max is impervious and keeps moisture and bacteria out, making it an ideal choice for hurricane areas.

How long does it take for Blue Max to dry?

The issue should be addressed in situ for a minimum of 28 days.

Can you tile on top of waterproofing?

Re-tiling an existing waterproofing layer doesn’t require an additional one. Check for drummy tiles by tapping them with a screwdriver, remove hollow tiles, re-glue them down, and grind down high spots. Clean the floor and walls thoroughly, apply primer to the existing tiles’ surface, allowing new adhesive to bond with the old tiles. After the primer dries, tile is ready. If you have further questions or need further assistance, please don’t hesitate to contact us.

Can you use waterproof paint inside?

This article provides an overview of waterproof paint, a popular choice for interior painting due to its affordability and ease of application. However, DIY painting is not recommended unless you have sufficient experience and knowledge. DIY projects can potentially cause more harm than good to your home. It is recommended to seek professional help from reputable painters, especially when dealing with waterproof paint, as it has unique properties compared to regular paint.

Can you paint on top of water seal?

To apply Thompson’s WaterSeal® Clear Multi-Surface Waterproofer, ensure surface and air temperatures are around 50°F during application and remain above 40°F for 48 hours after application. Do not apply if rain is forecasted within 24 hours of application. Perform the splash test by sprinkling water on various sections of the surface to be sealed. If water absorbs and darkens the color of the surface within five seconds, it is considered ready to be treated. Cover plants and shrubs, move all objects that could come in contact with overspray, and remove wet overspray with water or paint thinner or mineral spirits.

Protect the product from freezing and store below 32°F. In case of accidental freezing, call The Thompson’s Company Help Line. Surface preparation involves cleaning surfaces free of mildew, dust, dirt, oil, soot, grease, and other contaminants. Allow the surface to dry thoroughly before application, preferably 2 days for wood and 3 or more days for concrete or masonry. Do not mix with other waterproofing products; variations in the final appearance may result. Concrete/Stucco must be completely cured (minimum of thirty days) and dry. Shake contents well before use and apply by brush, roller, dipping, or sprayer.

Drying time will vary depending on the substrate, temperature, and humidity. Perform the splash test once a year to see if reapplication is necessary. Vertical and horizontal surfaces will experience color changes at different rates. Clean brushes and equipment with soap and water.

Is it OK to tile over existing floor tiles?

Tiling over old tiles can be done, but it may cause issues with the original tiles, such as looseness, and make it difficult to install fixtures and fittings. BJD Building and Roofing advises stripping back to the original wall finish and re-skimming the plaster as part of achieving a good finish. They suggest taking off extra thickness when tiling around shower fittings for a few hours of work.

Alternatives to tiling include bathroom tiles, which are hardwearing, easy to clean, and come in a range of colors, sizes, textures, and shapes to match your décor. However, it is important to strip back to the original wall finish and take off any extra plaster when stripping the tiles.

Can I paint over blue Max?

To ensure optimal adhesion and performance, it is essential to prepare the surface by ensuring it is free of contaminants, particularly loose materials. Following the application of two or three coats, the product may be painted over with a quality latex paint after approximately seven days.

Can liquid rubber be used on concrete?

Liquid Rubber is a versatile coating that can be used for waterproofing, air barrier, and corrosion protection. It can adhere to various surfaces, including concrete, stone, metal, bitumen, wood, PVC, metals, and zinc. Once applied, the compound forms a flexible, seamless, elastomeric waterproof membrane, eliminating joins and allowing for use in unconventional locations like underneath bridges or on building sides. This elastomeric membrane allows for a seamless and effective waterproofing solution.

How to apply ames block and wall?

It is recommended that a vapor barrier be applied with two coats of Block and Wall, or an alternative material may be used if the application is below grade. The material should be applied with a paint roller, brush, or sprayer at a rate of one gallon per 100 square feet.