Coolaroo Outdoor Living Shade Retention Tips?

To install Coolaroo Spring Operated Outdoor Roller Shades, roll out the fabric across your structure and loosely pull it into position, leaving about 300mm (12″) overhang all around. Fix one of the longer edges first, or the edge closest to your house, and start at one end, applying medium tension as you move along.

To re-tension cordless Spring Roller Shades, adjust the tension of the springs. Follow these steps to easily set up your new Simple Lift Outdoor Roller Shade after installation. To mount your shade from the top or ceiling, follow these steps.

For Coolaroo Spring Operated Outdoor Roller Shades, use the instruction manual online. To mount your shade from the top or ceiling, follow these steps. For Coolaroo Exterior Roller Sun Shade installation instructions, follow these steps.

To install the shade, pull it apart first, put all mounting brackets up, and take one of the top rod end caps off and hold in place. Measure across to ensure proper installation.

For stock Shades, use the chart to determine the placement of screws. Install the Crank unit and Idle end unit brackets, as shown in the video.