What Type Of Nails Are Used On The Outside Fascia Board?

Copper nails are resistant to corrosion and suitable for attaching wooden fascia boards, especially in coastal areas where salt air might cause rust. Roofing nails come in various materials, including aluminum, stainless steel, and galvanized steel. The size of the nails depends on the thickness of the fascia board and the size of the rafter ends. Hardie Trim recommends using a minimum 6d siding corrosion-resistant nail when attaching its fascia boards to wood frame construction. Large trim pieces should use 15-gauge nails for attaching wide or heavy exterior trim, such as fascia boards or window casings.

When installing exterior doors, carpentry nails should be used to tack the ends of the fascia board into the rafters. Uninstall the gutter system from the fascia board and locate the new fascia boards with a nail gun. Place two nails on top of one another every few feet, securing each one to a roof rafter board. Make sure the boards are level before using high-quality painted trim nails.

POLYTOPS nails are used to fit the fascia board, with sizes 40mm, 50mm, and 65mm. POLYTOPS pins are 25mm, 30mm, and 40mm and are used to fasten lighter soffit boards. Use a minimum 8d hot-dipped galvanized nail with a minimum 0.270 in. diameter head to penetrate structural framing or wood.

For trim and siding, use stainless ringshank siding nails, which have a small head larger than a finish nail but smaller than a common nail. Ring shank stainless steel trimheaded nails are used for trim and siding, with a smaller head and shank than framing 8d nails.

Trim nails are designed for exterior use on homes, securing home gutters, fascia, soffit boards, and exterior trim. Finish nails should be used with 65mm nails for standard fascia, 50mm nails for cover boards, and 40mm pins for soffit boards.

What kind of nails to use for exterior siding?

Hot-dip nails are ideal for wood siding due to their zinc treatment to prevent rust formation. These lap siding nails are suitable for most siding applications. The ideal nail length depends on the depth into the build’s structural framing. LP SmartSide recommends nails that penetrate structural framing by at least 1-1/2 inches. Sheathing-only attachment options are also available. When nailing in siding, ensure the nail gun head is flush with the siding surface and avoid overdriving nails.

What type of nail for exterior trim?

This exterior trim tool features a Brad head that is designed to set easily and ensure a neat finish. The tool is double-dipped in molten zinc and is composed of hand-drive stainless steel type 204Cu plain shank painted white. Should you require a different color, please contact Customer Service.

What kind of fasteners should be used to attach fascia?

TimberTech composite decking products are durable and require high-quality deck fasteners. TOPLoc fascia fasteners are designed for specific decking lines (capped polymer or capped composite) and are color-matched for a seamless look. For composite decking, use TOPLoc for Composite hidden fascia fasteners and TOPLoc fascia drill bit (sold separately). For advanced PVC decking, use TOPLoc for Advanced PVC hidden fascia fasteners and TOPLoc fascia drill bit (sold separately).

What type of nails to use on fascia board?

Trim nails are exterior home security tools used to secure gutters, fascia, soffit board, and trim. Finish nails are used in fine carpentry and cabinetry, and are suitable for moulding. They have small heads that can be driven flush to the work piece or countersunk to conceal them. Brad nails are smaller versions of finish nails, suitable for woodworking, cabinetry, and craft work. They have heads slightly larger than the shaft diameter, allowing countersinking. Both types of nails have their own advantages and disadvantages.

What to use to attach fascia board?

When installing fascia boards, it is recommended to use number eight spiral or screw nails or a rib shank nail for heavy gutter systems. A fastener count of two to three should be used every 16 inches. Installing fascia boards up and down can cause wavy boards, which can be noticeable when installing gutters. Using too thick fascia boards can also cause shingles to be shorter than intended. When replacing fascia boards, it is common to use a thicker board, going from a three quarter or one biomaterial to an inch and a half, which can cause shingles to be three quarters or even up to an inch shorter. Short shingles can cause water to kick back and rot the fascia boards.

Do I need special nails for siding?

CertainTeed advises using corrosion-resistant nails, such as aluminum, stainless, or galvanized roofing, with a minimum head diameter of 5/16″. They recommend stainless steel nails or other corrosion-resistant fasteners for coastal areas. Staples should be a minimum of 16 gauge, and screws should be non-corrosive, self-tapping, pan head or washer head screws or oval head with countersunk washer screws.

The length of nails required depends on the thickness of the sheathing material, with fasteners needing to penetrate a total of at least 1-1/4″ into a nailable material like wood sheathing and framing. The minimum nail size should be 1-1/2″. To determine the quantity of nails required, measure the thickness of the sheathing material and the nailing hem thickness.

Are galvanized nails ok for outdoor use?

Hot galvanized roofing nails are steel coated with zinc, providing high corrosion protection for outdoor projects. They are budget-friendly and suitable for various outdoor projects. They are ideal for securing the underside of structures. Hot galvanized tie fasteners, bathed in molten zinc, offer superior strength and corrosion resistance. These fasteners require an upfront investment but offer excellent durability. They come in various thicknesses and fit most applications, making them a good choice for decks or fencing.

How long should fascia nails be?

It is recommended that the nail fascia be avoided in order to maintain the desired polished appearance. Furthermore, it is important to ensure that the soffit V-grooves are not compromised. It is recommended that nails be installed at 24-inch intervals, with particular care taken to avoid excessive tightening. The nails should be driven into the nailing surface to a depth of at least 3/4 inch.

What nails are best for exterior wood?

Outdoor fasteners like polymer-coated screws and hot-dipped nails are ideal for materials that retain moisture, such as decking, fencing, siding, and roofing. Aluminum screws and nails are resistant to rust and have a greater strength-to-weight ratio, making them suitable for light- to medium-load applications. Stainless steel nails and screws offer more long-term protection against corrosion but have a less strength-to-weight ratio. There are two types of stainless steel fasteners for outdoor use: 304 and 316.

304 fasteners are highly rust-resistant and suitable for drier climates, while 316 fasteners, also known as “marine grade fasteners”, are recommended for humid climates and coastal areas due to their resistance to corroding and pitting from chlorides.

What is the preferred nail for fastening exterior finish?

Siding nails are strong, weather-resistant nails used for fastening siding and joist hanger nails are designed for both indoor and outdoor use. Common nails are the first choice for framing, construction, and carpentry jobs due to their heavy shank and round head. Box nails have thinner shanks and are less likely to split thinner pieces of wood. Brad nails, made of 18-gauge wire, are suitable for wood trim, moulding, or decorative wood surfaces. Finishing nails are thin but still strong enough to hold trim in place.

Drywall, flooring, framing, roofing, and specialty nails are also essential for various applications. Cut nails are considered the best for hardwood flooring due to their blunt point and tapered shank, while drywall nails have little rings along the shaft to reduce slipping and bending. Duplex nails have a second head along the shaft, making them easy to remove and ideal for temporary construction and scaffolding.

Flooring nails have different designs for fastening to different materials, such as underlayment nails with rings on the shanks for firm installation of plywood floor or subfloor, or wood flooring nails with a spiral shank to reduce slippage. Framing nails are thinner and have a flat nail head, often coated for easy driving.

Concrete nails, made from hardened steel, have fluted shafts that can cling to concrete or brick, making them less likely to loosen or slip when supporting an object. Masonry nails are more budget-friendly than concrete nails and less likely to bend or break. Roofing nails have wide nail heads that keep house wrap, sheathing, and roofing felt in place, often with twisted shafts for increased holding power. Specialty nails include upholstery nails, corrugated fasteners, wood joiners, and others designed for specific applications.

Can I nail into fascia?

Replacement fascia boards (16mm – 22mm thick) should be installed using 65mm A4 Grade Stainless Steel Polytop Nails, available in various colors. These nails are load-bearing and should be used at every rafter foot, usually at 400mm spacings on new build projects. Cover boards should be secured to existing sound timber fascia boards or a new timber backing board using two 50mm A4 Grade Stainless Steel Polytop Nails at 600mm centres.

Soffit boards (Plain and Vented Soffits) should be installed using 40mm A4 Grade Stainless Steel Polytop Pins, which are shorter and smaller gauge than polytop nails. They should be fixed with two pins at 600mm centres (400mm for woodgrain).