What Size Paint Exterior Spray Tip Is Used?

Paint sprayer tip numbers are crucial for selecting the right tip size for different materials and surfaces. The first number, when multiplied by 2, represents the fan width when spraying an object from a distance of 12 inches. For thinner materials like stains and enamels, use a smaller tip size. For thicker materials such as exterior, latex, and oil-based paints, use larger sizes.

For latex or acrylic paint, a spray tip size of 0.015 – 0.021 inch is recommended for even coverage and a smooth finish. Oil-based paints require a slightly larger tip. Check the manufacturer’s recommendations on the appropriate sprayer tip size for each type of paint or material, as well as what paint or material is most suitable with your selected tip orifice size.

The best spray tip size depends on the type of material you are spraying and the surface you are spraying it on. All paint sprayer tips have size numbers that denote two specific factors – fan width and orifice size. Understanding what each digit means is key to choosing the right tip for. Choose a tip with an orifice size rated for the paint or coating you’ll be spraying. Light coatings such as lacquers, stains, and enamels require a small tip.

Select the spray tip that’s best suited for the paint you are using and the surface to be sprayed. Make sure the tip’s hole size does not exceed the maximum capacity of your sprayer. If you do not know for sure, check your manual for the maximum orifice size.

US manufacturers typically use three numbers to designate tip size, such as 517 or 211. For example, primers are usually thicker than the accompanying paint, so use a 1.7 or 1.8 mm tip to prime most surfaces. A basic rule of thumb is to use small tip sizes (such as 0.009in, 0.011in, 0.013in) for thin/low viscosity materials such as stains and lacquers.

What tip size for paint sprayer?

The Graco spray tip is crucial for creating a professional finish in your job. It determines the amount of fluid left when the trigger is pulled and the width of the spray fan the gun will create. To choose the right tip for your spray project, follow these recommendations:

1. Choose a tip with an orifice size rated for the paint or coating you’ll be spraying. Light coatings like lacquers, stains, and enamels require a small tip, while heavier coatings like texture require larger tips.

2. Size the spray tip according to the tip rating of your sprayer, ensuring it can support the tip you plan to use. If you plan to use multiple spray guns, choose a tip size that matches the multiple gun tip rating of your sprayer.

What is a 415 spray tip good for?

The 415 is the most popular size for spraying various surfaces, including walls, doors, ceilings, decks, exterior walls, and siding. It is also used for interior walls and ceilings. The 413 is suitable for doors, overhangs, and exterior siding, giving more control. It is also used for spraying cabinets. The 313 is similar to the 413 but for narrower areas. The 515 is similar but with a wider fan width. The 211 is a small tip used for new construction, especially for baseboards and exterior facial boards.

It requires an extra fine red gun filter and is prone to clogging when spraying latex. The 619 is used for new construction where over spray is not a concern and high output is needed. If you have any questions, contact info@gleempaint. com or call 863-3942 for recommendations.

What is a 110 spray tip used for?

The TeeJet 110 Degree VisiFlo Flat Spray Tip is a versatile tool for broadcast spraying applications, offering uniform coverage in various colors. Available in stainless steel, ceramic, and polymer, it comes in 80° or 110° spray angles in selected sizes. The VisiFlo color-coded version is available in ceramic 80° capacities 01-02 and 110° capacities 01-02. The standard version is available in 15°, 25°, 40°, 50°, 65° spray angles in brass, stainless steel, or hardened stainless steel. The tip also features automatic spray alignment with the 25612-*-NYR Quick TeeJet cap.

What is the difference between a 1.4 and 1.8 spray tip?

The recommended tip sizes for spraying clear coats on small parts and projects are 1. 2mm, 1. 3mm for a whole car, 1. 4mm for base coats and metallic, 1. 8mm for urethane primer surfacers, and 2. 2mm for poly-urethane primer surfacers. Common tip sizes include 0. 5-1. 0mm, which are used in detail spray guns for smaller patterns and thin dyes and stains, and 1. 3mm for a whole car. These tips help eliminate streaking and mottling, and are suitable for a variety of applications.

Is 1.2 or 1.3 better for clear coat?

The 1. 2mm and 1. 3mm nib sizes are suitable for clear coatings and thinner primers, with 1. 2mm being ideal for transparent spraying due to its small hole size. 1. 3mm is suitable for general clear coatings, thinner primers, water-based paints, and single-stage paints. The 1. 4mm size is suitable for most primers and thicker varnishes, making it a universal tip. The 1. 5mm and 1. 6mm sizes are multifunctional, suitable for primer and single-stage paint, but thinner coatings may pose a risk of orange peel.

What size spray tip for exterior siding?

Airless sprayers are versatile tools with a wide range of applications. The sprayers are available in a variety of tip sizes, enabling the application of diverse coating materials, including oil-based enamels, clear acrylics, polyurethane, latex, anti-corrosion coatings, and two-pack coatings. The selection of the appropriate tip allows the operator to exercise control over the width of the fan and the depth of the coating, thus enabling the application of a coating with precision or the rapid coverage of a surface.

How do I know what size spray nozzle to buy?

To determine the optimal spray gun nozzle tip size for your project, consider three main factors: the coating to be sprayed, the project surface area, and the spray gun being used. Our team of experienced painters has identified five key factors to consider when selecting the right nozzle tip size for each job. They will provide advice and guidance to help you make an informed decision, ensuring your project looks amazing with great coverage and finish.

Key takeaways include getting the perfect size of spray gun nozzle tip for each job requirement, using our comprehensive step-by-step guide, accessing our expertise and knowledge to make the right choice without confusion, avoiding costly mistakes, and taking advantage of our tailored advice to enhance the efficiency of your work.

What is the difference between 515 and 517 spray tip?

The second two digits of a spray tip’s size are measured in thousandths of an inch. For example, a 517 tip sprays 10 inches wide through a 17 thousandths of an inch orifice, a 515 tip sprays 10 inches wide through a 15 thousandths of an inch orifice, and a 513 tip sprays 10 inches wide through a 13 thousandths of an inch orifice. The list of tip sizes helps determine the appropriate spray tip for the desired coating, with gun filter recommendations for each size. Thinner coatings like stain and lacquer use smaller tips, while heavier coatings like roof paint require larger tips.

What size spray tip for masonry paint?

After preparing the surface, set up a spray machine for application. The tip size should be 517 or 519, depending on the paint manufacturer and machine. There are two common types of sprayers: airless spray machines and HVLP spray machines. Airless sprayers use high pressure to achieve even surface coating, suitable for large interior and exterior surfaces. They operate on a pressurized paint system that can reach 2000 psi, allowing for quick and efficient application.

HVLP spray machines, on the other hand, offer high volume and low pressure, dispensed through a low pressure of air flowing from the machine. They atomize and dispense paint at roughly 10 psi, allowing for more controlled dispensement, enabling accurate distribution of paint for finer details like woodwork and UPVC.

What is a 1.7 spray tip used for?

Heavy-bodied primers and primer surfacers should be sprayed with a nozzle size of 1. 7 to 2. 2, while basecoats should be sprayed with a 1. 4 to 1. 6 nozzle. Clearcoats should be sprayed with a 1. 3 to 1. 7 nozzle, and sealers and single-stage urethanes should be sprayed with 1. 4 to 1. 6 nozzles. However, some spray gun manufacturers may go against this rule and increase the nozzle size, so it’s important to consult the gun manufacturer’s and paint company’s recommendations.

What size nozzle for house paint?

To choose the right sprayer for your project, consider the coating, project surface area, and fan width. Heavier coatings require larger orifice sizes, such as 1. 7 or 1. 8 mm for primers, while painters typically use 1. 2 to 2. 0 mm for specialized paint. The project surface area also determines the appropriate fan width, which is the shape the product will leave the gun nozzle. Airless spray guns have more control over fan width than conventional ones, as the coating is forced through the tip without being atomized by air.

For large surfaces, a wide fan will increase spray coverage and allow for close spraying without excessive buildup. Smaller surfaces require a smaller fan width to reduce overspray and allow for further spraying. The tip size for your spray gun depends on the application. For AIRSPRAY spraying systems, the best spray quality can be achieved with a particle speed unit of 1. 5m/s to 5 m/s. A chart can help you find the most suitable nozzle for your application.