Manufactured homes are often built with wall sections or panels that make assembly and transporting easier. Clayton Homes uses batten strips to cover the seams between pre-finished, vinyl-covered wall panels. They are built from quality materials like finished drywall, which is commonly used for manufactured home walls and often provides more design options. The thickness of manufactured home wallboards ranges from 5/16″ to ½”.
Manufactured homes have evolved over time, with modern homes often featuring different materials. Interior walls, sometimes called partition walls, can be 2x2s and spaced 24″ apart. Lux windows® (A+ BBB rating) are included in Clayton Homes, which always includes basic features such as being constructed to meet insulation and wind requirements in the customer’s location.
Clastic Homes offers two different wall types: VOG and Full. For customers who want to amp up the interior of their home, Clayton Homes offers custom upgrade options, including kitchen range hoods, additional kitchen cabinets, and bathroom options like drop-in showers. Modular homes are built with wood frames and high-quality insulation, similar to site-built homes. Insulation is installed and walls are built to your specific area’s wind.
Clastic Homes also use drywall and vinyl-covered wallboard for their walls, which are typically constructed with 2×3″ or 2×4″ lumber and spaced at 16″ or 24″. Batten strips are made from thin strips of wood.
Clastic Homes is known for its great indoors, with every Clayton Built® home constructed inside a state-of-the-art, climate-controlled facility away from the elements. The most common type of wall used for manufactured homes is Vinyl-Over-Gypsum (VOG), which is drywall coated in vinyl wrap.
📹 Clayton Homes Quality and Innovation
There’s more to a home than just solid engineering and a modern design with all the bells and whistles. A home is a place to …
Are any interior walls in a mobile home load-bearing?
Single wide mobile homes typically have few load-bearing walls, but it’s crucial to be cautious when removing these walls to ensure structural integrity. The roof, which carries the weight down to the chassis outriggers, is responsible for the stability of the unit. Double wide walls, such as load-bearing walls or marriage lines, can weaken structural integrity, create roof leaks, and lead to costly issues.
To remove a marriage line wall in a double wide, it’s essential to have extensive knowledge about construction and redistribute any weight the wall was holding. This requires knowledge, experience, and mathematical skills.
What are older mobile home walls made of?
Older mobile homes typically have Vinyl on Gypsum (VOG) wallboards, while new manufactured homes typically have Paper on Gypsum (POG) or finished drywall options. Clayton Built® manufactured homes have walls that meet or exceed federal standards in moisture content and overall quality, providing an exceptional wall thickness. Each home is built for a designated wind zone, and wall systems must resist wind pressures and loads for the final destination. All walls must also support the material used to enclose the manufactured home.
What are the best walls for a mobile home?
Vinyl-Over-Gypsum (VOG) walls are popular for manufactured homes due to their soundproofing and protection from the elements. They are installed over gypsum board, an insulating material with higher insulation and moisture resistance than drywall. VOG walls are durable and can be painted when damaged. Tape-and-textured walls are the most common type of wall used in manufactured homes, consisting of textured metal or plastic pieces on metal or plastic sheets.
They are easy to install and last for a long time, but may not provide adequate insulation for the home’s climate and may allow outside noise through slits. Drywall walls, also known as textured walls, are a popular choice in manufactured homes due to their balance of style and practicality. They can be finished with paint and can be easily sanded for refinishing or caulking for repairs.
Can you replace mobile home walls with drywall?
Mobile homes are designed to be lightweight, but they still have wooden studs and manufacturers often use 1/4-inch paneling to cover the framing. The wall studs are spaced to support 4-by-8 panels, so mobile home drywall comes in 8ft by 4ft sheets. Choose the thinnest drywall sheets, 3/8-inch, which are lighter than 1/2-inch and easier to handle. Measure the area needed and estimate the number of sheets needed, adding a percentage for waste. Most supply stores will deliver the sheets due to their size and weight.
To install the drywall, remove all outlet and wall switch covers, molding, baseboards, wall panel strips, and any ceiling-to-wall strips. If working on one room at a time, cut the power in that room by turning off the appropriate breaker, as removing the wall panels will expose the electrical wires and require repositioning the electrical boxes to be flush with the new drywall surface.
What are Clayton homes’ walls made of?
Manufactured homes often use materials like drywall and vinyl-covered wallboard for their walls. Drywall is the most common type, offering more design options and higher insulation value. However, vinyl paneling is easier to clean as it does not absorb liquids as easily as drywall. Minor repairs to drywall in manufactured homes can be as simple as patching holes, embedding popped nails, and filling small cavities. It is important to note that you will likely need to touch the paint in any area of drywall that needs to be fixed. Both drywall and vinyl-covered wallboard have their advantages and disadvantages.
What drywall is used in mobile homes?
Vinyl-Over-Gypsum (VOG) is a common type of wall used in manufactured homes, coated in vinyl wrap. This is a different treatment of drywall compared to taped, floated, textured, and painted drywall. VOG is commonly associated with mobile homes and comes in 3/8″ or ½” thick thickness. Each factory offers a variety of vinyl colors and design options, including shiplap, wood, red brick, and white-wash brick.
Choosing a VOG wall offers several benefits, including cost-effectiveness, durability, easy maintenance, and easy cleaning. Unlike tape-and-textured walls, VOG walls can be easily cleaned and wiped down, ensuring they stay looking new for a long period. VOG wall floor plans can be found in the New Moon and Select series. A housing specialist can help you choose the right VOG wall for your new home.
What are the interior walls of a mobile home made of?
Manufacturers typically use vinyl-on-gypsum (VOG) wall panels instead of standard drywall, which are covered with batten strips during assembly. This method of manufacturing and installation can complicate the painting process, but it doesn’t prevent the ability to paint the walls when updating their appearance. VOG panels have a shiny finish and often feature a printed design layer. Manufacturers prefer VOG panels for their lightweight and easy installation in factory settings.
Before painting, it’s essential to decide whether to leave the battens up or remove them. The finished product will look similar to standard walls in stick-built homes. If you can live with the battens, you can paint over them for a cost-effective update.
Do mobile home interior walls have studs?
Mobile homes are built similarly to traditional homes, using 2×3 or 2×4 studs placed 16-24 inches apart on center. The walls in mobile homes perform the same functions as those in any home, including electrical components like outlets, light switches, appliances, and HVAC service. Some upgrades or additions may include plumbing lines or other components. Sound and climate control properties are similar to any home, with walls, insulation, and sound barriers being similar.
Even with the Paper On Gypsum wallboards, the appearance and function are similar to standard drywall. In some cases, you may have the choice to include a standard drywall finish in your interior walls. Understanding these properties is crucial when considering the spaces and functions of your new home.
How far apart are studs in Clayton Homes?
The HUD Code stipulates that the interior walls of manufactured homes are typically constructed using lumber measuring 2×3″ or 2×4″ in width, with a spacing of 16″ or 24″ between studs. The studs are framed on 16-inch or 24-inch centers with structural headers, thereby ensuring functionality and strength. The thickness of manufactured home interior walls is subject to variation at the state level. For instance, the states of North Carolina and Oregon have established specific wood wall stud requirements.
Can you hang heavy things on mobile home walls?
Hanging a TV in a manufactured home can be challenging due to the wall construction, which may not be as sturdy as traditional stick-built homes. To hang a TV, locate the studs in the wall, which may be different from 16 or 24 inches apart in traditional homes. Anchor the TV mount into the studs, not just the wallboard. A stud finder can help locate these studs. Wall material in manufactured homes can vary, and in some cases, particle board or gypsum board may be less strong than traditional drywall, making it even more crucial to ensure the TV is mounted into the studs.
Are any interior walls in a mobile home load bearing?
Single wide mobile homes typically have few load-bearing walls, but it’s crucial to be cautious when removing these walls to ensure structural integrity. The roof, which carries the weight down to the chassis outriggers, is responsible for the stability of the unit. Double wide walls, such as load-bearing walls or marriage lines, can weaken structural integrity, create roof leaks, and lead to costly issues.
To remove a marriage line wall in a double wide, it’s essential to have extensive knowledge about construction and redistribute any weight the wall was holding. This requires knowledge, experience, and mathematical skills.
📹 Clayton Homes: One Year of Ownership – The #1 Flaw!
We’ve officially been in our home for a year now, and a few more problems have developed since we made the video about our …
Theres a reason these cheapo outfits only give a 1-year warranty. If they’re supposedly building a house that a family can live in for decades, as they talk aaaaaaalll about at the dealership and in brochures and such, then why only a 1 year warranty??? Cuz they’re built like crap, and nobody knows that better than them.