The Right Way To Paint Exterior Walls?

Painting exterior walls, whether render or brickwork, is a significant task that requires the right tools and supplies. A step-by-step guide on how to paint exterior walls includes using masonry paint, a long-pile paint roller, a paint tray or scuttle, a paint brush, sandpaper, and dust. To ensure the best coverage, remove dirt and dust buildup from the house using a pressure washer. Work your way from top to bottom of the house in a smooth, controlled manner, overlapping.

Painting a house exterior adds character and a fresh appearance to faded pebbledash or disguises dull grey cement. It also protects brick and stonework from weather and wear and tear. To avoid common exterior painting problems, plan a strategy for the most efficiency, paint into a wet edge, use a three-step brush technique, roller technique, and cutting-in exterior house painting.

When properly applied, new paint on a home’s exterior should last for close to 15 years, as long as you use top-quality materials, apply them with care, and prepare all surfaces. Preparing surfaces involves covering the ground with dust sheets and tape, dusting and cleaning all surfaces for painting, scraping down the walls, filling cracks or holes with Prestonett Exterior Filler, using a high-quality synthetic bristle brush or a short nap wool blend roller for the best finish, washing the walls thoroughly, and applying the first coat of paint.

Do I need to wash outside of house before painting?

Pressure washing is crucial before painting a house to ensure a thorough bond between the exterior materials and the new paint. If the surface is dirty, it can cause cracks and peels over time, requiring costly and inconvenient redone jobs. Exterior paint in Ohio lasts from five to twenty years, depending on the substrate. Wood siding lasts for five years, while aluminum and vinyl last up to twenty.

Regular soft washing protects the paint and helps it last longer. Power washing is not recommended for freshly painted houses, as it can cause bubbles, cracks, or peels. Instead, soft washing is the safest, easiest, and most effective way to keep the house clean.

Do I need to wash exterior walls before painting?

Before painting exterior walls, it is essential to clean them to ensure they are clean and dry. Dirt and debris on the wall can hinder the adhesion of paint to the surface. A step-by-step guide on how to paint exterior walls includes using Masonry paint, a long-pile paint roller, a paint tray or scuttle, a paint brush, sandpaper, dust sheets, masking tape, exterior filler, filling knife, and scraper. Proper preparation is crucial for achieving a high-quality finish or ensuring proper paint adhesion.

Do exterior walls need primer before painting?

Before painting bare surfaces like brick, stone, or render, it is essential to apply a primer to prevent paint from absorbing into the wall and providing added adhesion. Diluted coatings on masonry paint can be applied as a priming layer by adding 10 water to the paint in the first coat, provided the surface is completely sound. It is crucial to choose the best primer for the masonry paint, such as Emperor Masonry Paint Exterior Masonry Primer, which contains water repellent technology, or a universal primer like Zinsser Bullseye 1-2-3 for standard masonry paint.

Does paint go further with a brush or roller?

Paint rollers are ideal for painting large flat surfaces like walls and ceilings, as they can hold more paint than a paint brush and distribute an even layer quicker. They come in various sizes, styles, and materials, and are made of a frame and a cover or sleeve. Sleeve thickness, also known as paint roller nap, comes in three main sizes: short pile, medium pile, and long pile. The larger the sleeve, the more paint the roller holds. For flat walls, choose a short pile sleeve, medium pile for uneven walls, and long pile for highly textured walls.

Do professional painters use brush or roller?

Professional painters typically use both brushes and rollers when painting, with brushes used for tight spaces and intricate details, and rollers for larger surfaces like walls and ceilings. There are various types of rollers available, including foam, microfiber, and synthetic, each with their advantages in terms of speed, efficiency, cost-effectiveness, and quality results. This blog post will explore the benefits of using paint roller covers for painting projects, including speed, efficiency, cost-effectiveness, and quality results.

It will also provide expert tips on applying paint correctly with a roller sleeve, maintaining even pressure on smooth or textured surfaces, and avoiding drips and splatters. The guide will also cover finishing touches, such as blending edges with brush strokes or touching up problem areas after rolling paint.

Should you roll or spray exterior house paint?

Rolling is the process of applying paint by rolling a roller across a surface, which can be used in various sizes and types depending on the desired finish. This method results in fewer drips and splatters compared to spraying and produces fewer streaks than brushing. Experts recommend rolling two thin coats for best results. To apply paint, start at one end and work your way to the other in a consistent pattern. Stay on the roller for complete control and use painter’s tape to outline edges or cover specific areas.

Wear protective equipment when applying paint with a roller, just like when spraying. Both rollers and sprayers can be effective tools for exterior paint jobs, but one may be more suitable depending on the type of paint and surface.

Do you need to sand exterior paint before repainting?

Sanding old paint on exterior walls, trims, and siding is crucial for the durability of the job. To remove loose paint, use a scraper to scrape all surfaces, applying enough pressure to avoid gouges. Use a wide scraper for siding and a smaller one for trim, windows, and doors. Coarse sandpaper is recommended for smooth sanding, gradually removing paint differences between paint and adjacent wood. Orbital sandpaper can be used for larger areas, but a sanding block is recommended for trim and tight spaces. Sand off any paint that didn’t need scraping to coarsen the surface for better adhesion. It is essential to avoid applying too much pressure to avoid gouges.

Do I need to sand before painting the exterior?

Sanding is a common exterior and interior maintenance process to remove peeling paint edges and limit unsightly imperfections. It smooths out plaster, joint compound, or spackling, allows for “bite” between coatings, and reduces glossiness. However, it is advised to avoid sanding on homes built before 1978 with lead paint, as it should be done by a certified professional with the appropriate equipment. This is especially important for homes built before 1978.

What is the procedure for exterior wall painting?

To paint a house exterior, one must first prepare the surface, choose the appropriate paint, protect surrounding areas, begin with primer, utilize proper tools, adhere to the proper technique, consider weather conditions, and maintain a consistent color scheme.

What is the best way to paint an outside wall?

A long-pile roller is the best method for applying paint to exterior masonry, as it allows for large amounts of paint to be applied without missing areas. A paint brush is also needed to “cut in” around the wall’s edges. Painting outdoor walls offers several benefits, including bringing them back to life with a fresh look, especially during wet winter months. In the UK, outdoor surfaces can become dirty and tired quickly, making painting an option for those looking for a change. Painting outdoor walls can be a simple and affordable way to change up the look, and there are thousands of colors to choose from, not just the common white, cream, and grey used in the UK.

Is it better to paint exterior walls with a roller or brush?

The use of a roller is recommended for the expeditious and straightforward completion of the task at hand. The application of paint will result in the “orange peel” finish being smoothed out, rendering it optimal for use on surfaces that require a uniform finish.