PVC trim is a durable and soft plastic used for exterior trim projects, with nail holes filled with various materials like wood glues. Bond-and-Fill is a safe choice for filling nail holes in PVC interiors, while PVC cement is recommended for gluing joints together. Cortex fastening screws are also recommended for installing PVC trim.
Vinyl spackling is an ideal material for filling nail holes in PVC due to its elastic polymers. Polycrylic can be used over oil-based finishes, but it’s important to lightly sand and clean the surface thoroughly. The most effective paint for PVC trim is 100 acrylic latex paint, which is designed to bond with PVC.
PVC is made from a honeycomb structure of polyvinyl chloride, making it impervious to moisture even when cut. However, this can lead to issues with moisture penetration. For bonding to other surfaces, use PL premium or PVC Trim Welder. Any polyurethane glue will likely work, and nails are superfluous.
PVC trim is installed with glue at all joints and bedding surfaces, making nails superfluous. Cementing joints is another advantage of PVC, as it allows for tightening and preventing water from penetrating behind the trim. Paintable acrylic or polyurethane caulk can seal gaps, and fasteners such as cortex fastening screws are recommended for superior coating adhesion and flexibility. Lacquers are not suitable for PVC trim.
📹 Cutting PVC roof panels the easy way, no cracks, perfect cuts, Palruf, Suntuf, Suntop, Palram
Quick video showing how you can cut corrugated roofing panels like Palram’s Palruf, Suntuf, and Suntop. Easily with no cracking …
How do you seal PVC trim?
The application of sandpaper with a grit rating of 120-320 to the cut edge, followed by the use of a clear adhesive or acetone, can facilitate the sealing of PVC trim to a factory finish.
What paint to use on interior PVC trim?
The aforementioned restrictions pertain to the specific type of paint utilized, namely an acrylic-based paint with UV reflection additives. This is done to prevent heat absorption and subsequent warping of the PVC. It is advised that local paint suppliers be consulted for guidance on the optimal paints for exterior PVC applications.
How do you get paint to stick to PVC trim?
Before painting cellular PVC trim, clean it to remove dust, dirt, and foreign material. Use a premium 100 acrylic latex paint with a built-in primer for better finish quality. If required under the paint manufacturer’s warranty, a primer may be required. Paint after installation to avoid repetitive touch-ups and allow installers to proceed with the job before the homeowner decides on color. Follow the paint manufacturer’s instructions, especially when using a 56 LVR or lower paint. Select a solar reflective coating when using a 56 LVR or lower paint and carefully read the manufacturer’s instructions for additional insight on coloring and coating requirements.
What is the best sealant for PVC trim?
Titebond Ultimate PVC Trim Adhesive and Sealant is a one-component, advanced polymer adhesive sealant suitable for a variety of PVC trim, molding, deck railing, and beadboard installations. The adhesive and sealant is capable of adhering and sealing PVC trim to a variety of materials, including wood, metal, and masonry. Additionally, it is characterized by a white coloration.
What kind of paint sticks to PVC plastic?
To paint PVC pipes using spray paint, follow these steps:
Choose a plastic-rated paint in your desired color, shake well, and begin spraying slowly and steadily across the pipe. Use a lighter touch to avoid drips.
Apply additional coats, wait 20-30 minutes, and repeat the process until the desired color is achieved.
Allow the PVC to dry and cure for at least 24 hours before using it. For applications prone to scratches, wait up to a week before working with it.
Can polycrylic be used on plastic?
Polycrylic is a water-based, clear protective finish that is suitable for various surfaces like wood, metal, and plastic. It is known for its durability, clarity, and ease of use. Unlike traditional oil-based polyurathane, it dries quickly, has low odor, and is easy to clean with soap and water. It also has a lower VOC content, making it an environmentally friendly option. Polycrylic forms a protective layer on the surface, protecting the underlying material from scratches, stains, and damage, while enhancing its natural color and texture.
What do you use to fill PVC trim?
Nail erasers represent a convenient method for filling brad, staple, and nail holes in PVC trim board that remain unpainted. These fillers are a blend that resists discoloration and have been tested for hole retention on cellular PVC at 140°F.
Can you use liquid nails on PVC moulding?
LIQUID NAILS® LN-501 is a rapid-setting, high-performance adhesive engineered to facilitate the bonding of PVC shims, siding, and trim components to typical construction surfaces.
What are the disadvantages of polycrylic?
Polycrylic is a wood finishing product that takes around 3 hours to cure, making it difficult to apply to wood. It is not suitable for high heat and may not provide ambering for desired appearance. Polyurethane, a synthetic resin used for wood surfaces, is a durable, easy-to-apply finish with excellent resistance to moisture, chemicals, and abrasion. It is available in oil-based and water-based formulations and is easy to apply due to its thick texture. However, polycrylic may leave indentations on freshly-coated wood and may not be suitable for certain aesthetic preferences.
What do you nail PVC trim with?
In the absence of access to nailers, the use of finished eight-d nails is an alternative option. The length of these nails is specific to the type of nail used and can be determined accordingly.
📹 GEL STAIN OVER PAINT ☑️ WORKS ON ANY SURFACE!
Products Used: Grey Kills interior/exterior primer Behr Premium Plus Ultra in Semi Gloss – Open Canyon Briarsmoke Varathane …
The good thing about your article over every other one I’ve seen, is your cut is done after roof installation. All the others have you cutting the sheet prior to installation. Good job! I have to cut the ‘lip’ of old polycarbonate sheeting (overhangs gutter), so I can fit steel mesh gutter guard in. Hopefully it doesn’t crack/split.
This type of plastic roof is actually not great on a Gazebo – especially if you live in an area prone to hail. We had a severe hail storm last year and it completely shattered our roof, big and tiny plastic pieces everywhere. It took forever to clean it up. I would highly recommend for people to buy a more sturdy Gazebo roof, preferably wood or metal.
I have to use this paneling at work. I use a skillsaw with a fine tooth blade. Gotta cut super slow for it not to crack. It’s a pain. Wish we had one of these tools. Gotta use a face shield because the saw sends little pieces of shrapnel right into your face. I work on a farm with a bunch of greenhouses with this roofing that’s over 20 years old. Always gotta replace panels.
I fricken love gel stain. I bought a 1980 house with the old cherry colored door frames, moulding, and window sills. I decided to keep the wood trim (with updated moulding, doors, etc.) I found a good color match, and after cleaning and a little prep, I go over the door frames with gel stain using a rag. It really pops out a warmth to the wood and dries with a little sheen. Really nice. I feather brush on the sills. OMG! It looks really nice. I luv gel stain. So glad I didn’t paint it all white. I appreciate wood tones so much more.
(ps: for the dry time, i have always added this amazing paint additive called “Japan Drier” to my oil paints and/or oil based inks and it always cuts the dry time by at least half and that’s me being generous! you can find it in any art store including Michaels usually in the same section as all the oil paints as it is an oil based paint medium meant to speed up drying times. i have never tried it on gel stain specifically but i am going to for my project that i am about to do which is why i am perusal this article so i will update my comment as soon as i try it out!) Hey great article! this article was a perfect find for me as i couldn’t decide what color to paint my door and there is a bunch of graffiti on it so staining (well i thought) was going to be out of the question as i was unable to completely get off the ink, even after sanding ~ 7 layers plus of paint/wood! the ink they used had seeped incredibly deep past all the paint and into the wood of my door lmao! but anyways your vid came as a godsend as i just happened to have a bunch of the grey killa/ bin laying around and an unused can of red mahogany varathane laying around so i am about to try your easy to follow method and keep you all updated on how it turns out!!
Very nice. Great way, to give old furniture a more modern look. I often see second hand furniture like that, for next to nothing on resale sites. Well made, mostly real wood…but nobody wants it, because it looks too old fashioned. Sadly, I don’t have a home to furnish, or I would be all over it! But I love, that there are people, who save these pieces from the dumpster and give them a second life!
I would like to redo my entire dark bedroom set to an off white. I looked at your 1 step paint recipe, is that im place of the expensive 1 step paints that you can paint without sanding? Also not a fan of chalk paint. I have an extra gallin of killz, would it be better to prime that dark wood? I also saw your trick to remove redness from bleeding out of the wood. Depending how the top looks sanded, I might go with the natural wood.🙂
When using an oil based gel stain – or any oil based stain – I highly recommend a top coat/finish.. and a lot of trial and error have led me to one process – and that’s a wipe on polyurethane (I make my own). This article can be very helpful to those who aren’t familiar with wipe on poly… but I promise you.. it’s worth it. Don’t leave your project with the stain as the top coat.. it’s just like with painted pieces & using water based finish.. the results leave you with a professional looking piece. :). I promise wipe on is the way to go: youtu.be/cef5uFAX2dU?feature=shared
this is my favorite finish, look, and even one of my favorite colors schemes. Thanks for sharing the exact colors you used. Whst did you end up doing with the inside of the drawer? Here in Seattle, WA it’s a very long dry time. Better to leave it longer when in doubt. Routinely primer is 48 hours, paint a full day (not 2-4 hours). I have a problem that may make an interesting article. I have a beam on my white ceiling .I would love to get it too look like brown wood. At least woodish. Doesn’t have to be wood knots etc. Woodish would be good enough. Maybe even this whole deal would be fine. Or would it? And what colors would one go with for a brown woodish look? Yhanks for sharing.
Alright sold! Going to try it! Would you apply a poly topcoat as well? I used Retique It and loved it on two end tables and wanted to do it over my daughter’s furniture, it’s black and I want a change however it was over $500 for the Retique it product for that amount of square feet! I’m so glad I found your website. Thank you!
Hi Shannon, I think I’ve watched all of your articles on the Pottery Barn finishes and noticed that with this gray wash using the Briarsmoke Gel Stain, sometimes you’re using Open Canyon as your base, and sometimes you are using Rugged Tan. Can you please tell me which one gives the best “Pottery Barn” look, and what the difference looks like when completed – is one more tan vs gray?