Interior Cinder Brick Wall Texture Techniques?

Cinder block walls can be a visually appealing addition to any home, especially when finishing a basement or living in a house built entirely of concrete blocks. To give the wall a cool look, apply a few layers of different colors of paint with a mini roller in sporadic strokes, leaving a clean, smooth surface that hides imperfections. There are several creative ways to cover cinder block interior walls, such as using decorative panels, fabric wall coverings, or applying a textured plaster finish.

Parging involves applying a clean, smooth cement coating over a concrete wall surface, creating a neat, finished appearance that hides surface imperfections. Concrete walls look especially stunning on bright hallways, and their texture can be further highlighted with decorative white siding on the top and bottom of the wall.

Cinder block walls are easy to install, practical, and budget-friendly, but their bland textures and looks may not be pleasing enough. To achieve a textured appearance, add materials like pebbles or smooth rocks to the cement coating, paint over the cement after coating it with a concrete primer or mixing colored pigment into the wet cement.

There are three main ways to finish concrete block interior walls: painting, pargeting, and wood paneling and drywall. Knock down the texture with a knockdown tool, then use a knife or trowel to smooth it down. Use a belt sander and 80 grit to knock down high spots, and use a shop vac with HEPA filter to collect dust.

As you roll over each prior layer of color and the texture of the cinder block, you start to achieve a gorgeous mirage of depth and colors. Additionally, you can add pattern and texture to vertical concrete surfaces using stamps, skins, and hand carving tools.

Can you texture a cinder block wall?

Concrete pigment is a versatile option for creating colored walls without the need for paint. It offers various textures like polished, broom-brushed, or sponge-finished. Surface bonding cement, which contains acrylic and fiberglass, is easier to apply to vertical surfaces. To apply this cement, wet the entire cinder block wall thoroughly and then re-wet a 3 to 6 sq. ft. section to ensure proper adhesion.

How to make interior cinder block walls look better?

Painting is a simple and effective method for finishing concrete block interior walls, especially for those who prefer a bright, colorful coat. Priming is the only complex step, and a water-based latex primer is recommended. After priming, the wall can be treated like a blank canvas. A liquid membrane is another alternative to painting concrete blocks, but it may be necessary if concerns about water or moisture passing through the block or if there are cracks in the block. In most cases, painting is sufficient, but if there are concerns about water or moisture passing through the block or if there are cracks, a liquid membrane may be necessary.

What kind of paint do you use on interior cinder block walls?

Cinder blocks can be painted using acrylic-latex paint tinted to your choice, with interior paint for interior cinder blocks and exterior-grade paint for outdoor surfaces. Elastomeric paint is suitable for highly moist surfaces like basement cinder blocks. Apply primer or paint in temperatures between 50-90° F and dry the blocks completely. Use paint strippers in well-ventilated areas with eye and breathing protection and waterproof gloves. Natural paint strippers are caustic, so follow safety precautions.

How can I make my concrete walls more attractive?

Parge Cementitious Coating is a cost-effective method for creating a neat, finished appearance on concrete walls. It involves applying a smooth cement coating, which hides imperfections and can be textured with materials like pebbles or rocks. Color can be added by painting over the cement after coating it with a concrete primer or mixing colored pigment into the wet cement. A waterproofing coating can also be applied over the cement coating. Decorative Stucco Coverings, made of silica, lime, and concrete, creates a classic finish with endless color and texture choices.

How to finish interior concrete block walls?

Concrete block walls are often used in construction, but their appearance can diminish curb appeal and resale value. Covering them can improve outdoor space appeal and prevent cracking, rot, mold, and structural failures due to moisture infiltration. Permeable concrete absorbs water, expanding pores, and damages the concrete. Oil settlement and hydrostatic pressure can lead to hairline cracks and leaks.

To protect the concrete block wall, contractors can use decorative stucco, vinyl siding, artificial stone panels, natural stone, and natural green coverings. Polyguard recommends using a quality sealant like Airlok Flex® VP to maximize moisture resistance.

How do you waterproof interior cinder block walls?

Concrete blocks are commonly used for foundations and outbuildings due to their uniform size, ease of stacking, and hardness. However, they are more permeable to water and water vapor than poured concrete, making them particularly vulnerable. To protect them from water intrusion, it is essential to use the best block wall waterproofing products. Concrete blocks and cinder blocks are particularly vulnerable due to their larger pores, making them semi-permeable.

The permeability of concrete is 3. 2 perms per inch of thickness, while an 8- to 10-inch-thick poured concrete wall is about 0. 4 to 0. 3 perms. Once moisture intrudes into a block, it makes the pores even larger, reinforcing the cycle of damage to the structure. To waterproof concrete blocks, apply a coating directly on the bare wall, use a breathable/permeable barrier, use a weather-resistant elastomeric layer, repair cracks and fill voids first, and install an air and moisture barrier.

How to add texture to concrete wall?

Baking soda can be used to create natural stone-like textures in concrete molds. This technique can be used to create whimsical textures like zebra pattern wall panels. Baking soda, also known as sodium bicarbonate, acts as an accelerator in concrete, causing it to rapidly stiffen. Any areas where concrete touches baking soda freeze up to hold its shape and texture. CCI’s Marbled Look Concrete Course also provides guidance on creating natural veining and stone-like texture.

What is the cheapest way to cover a cinder block wall?

Cinder block walls are strong and inexpensive but not always visually appealing. To improve them, use various materials such as concrete, stucco, vinyl panels, and stone veneers. Apply a 1/4 in layer of cement to the wall, then apply a 1/4 in layer of scratch coat for a decorative look. Install furring strips and vinyl siding on the wall, and arrange stone panels with mortar. To ensure the concrete bonds cleanly, remove debris from the wall and spray it with water from a garden hose. Mix 1 cup of mild dish soap with hot water to scrub off tough stains with a concrete brush.

How do you texture inside walls?

To create a textured wall, one may utilize pre-mixed texture compounds, paint, or employ faux techniques such as rolling paint on or off with rags or applying a pattern with a sponge. These techniques can result in the creation of a distinctive and aesthetically pleasing wall surface.

Will plaster stick to cinder block?

Plaster is a common finishing material for building materials, but it often requires metal reinforcement or mechanical keying to attach it to the substrate. Concrete masonry is an excellent base for plaster without reinforcement, as it is made from the same cementitious material as plaster. The performance of the finished surface depends on the selection and use of proper materials, which must provide serviceability, durability, and satisfactory appearance. The Standard Specification for Application of Portland Cement-Based Plaster, ASTM C 926, includes specifications for materials for plaster use.

How to stop cinder block walls from sweating?

Nitterhouse Masonry offers high-quality construction materials for concrete structures, designed to preserve their strength and integrity. Their durable, eco-friendly architectural concrete blocks are manufactured with water repellents, providing optimal defense against moisture and mold spores. These blocks are available in various shapes, sizes, colors, and styles, making it easy to find solutions for your unique project and architectural requirements. To maintain similar temperatures between the air and concrete, turn the heat up and air conditioner down, and use a dehumidifier to decrease condensation and remove moisture.