Valspar Duramax Exterior Paint is a weather-proof, crack-resistant paint that is best for walls and siding. It applies easily to properly prepared and primed wood, drywall, vinyl, aluminum siding, as well as properly cured stucco, concrete, or cement composition siding/panels. The product provides a smooth, uniform finish with spray, brush, or roller application and can be applied to various exterior surfaces such as hardboard, fiber cement board, vinyl, primed metal, shakes, brick, cement, cinder block, and stucco.
Priming is not required when using Valspar Duramax Exterior Paint and Primer, but an exterior primer is recommended if needed. Valspar Fast Prep Ready-to-Use Solution is recommended before staining or painting exterior surfaces to extend the coating’s life and provide maximum durability. Valspar Premium Masonry has built-in self-cleaning technology and is UV resistant, ensuring your surface is protected against harsh weather conditions.
Valspar offers a range of exterior paint options that are specially formulated to withstand the elements and is ideal for use on properly prepared exterior wood, concrete, and primed metal surfaces such as porches, patios, breezeways, and concrete floors. However, it is not recommended for use on exterior wood decks, garage floors, or other automobile parking areas.
The paint is suitable for properly prepared interior or exterior concrete or masonry surfaces such as patios, walkways, breezeways, laundry rooms, and basement floors. Oil-based paint for concrete provides a tough and shiny finish and is generally more durable than latex-based paint. However, oil-based paints may leave streaks and require at least one more coat.
In conclusion, Valspar Duramax Exterior Paint is a weather-proof, crack-resistant paint that is suitable for use on various surfaces, including wood, drywall, vinyl, aluminum siding, and stucco. Thorough cleaning is necessary before applying the paint to ensure optimal results.
📹 Is Valspar Paint Any Good | Lowes Valspar Porch and Floor Paint Review
Complete Review of Lowes’ Valspar Porch & Floor Paint Review as I apply it to my concrete front porch. I go over the cost, use, …
Can I paint directly onto concrete?
Concrete patios can be painted, but they cannot be painted using any generic paint. Masonry paint is designed for vertical concrete and brick walls, and it is not suitable for outdoor concrete patios due to its moisture content. To paint a concrete patio, check the moisture levels using a moisture reader, as above 10 is too wet for paint to adhere. If a moisture reader is unavailable, put metal or plastic down on the concrete overnight.
To paint a concrete patio, you will need Rust-Oleum 7200 Floorcoat, floor degreaser, exterior filler and sandpaper, a long pile paint roller and extension pole, a paint tray or kettle, and a stiff brush. Dirt and grime are easily collected by concrete patios, so it is essential to clean the surface first. Clear the patio of furniture and sweep the surface using a garden brush to remove large amounts of leaves and dirt.
Scrub any dirt or grease from the concrete using warm soapy water and a stiff brush. For a deep clean, use an anti-fungal cleaner like Emperor Masonry Cleaner to kill any fungus that can bloom underneath the paint film, ensuring long-term results.
Does Valspar exterior paint need a primer?
Valspar® Duramax® Exterior Paint and Primer does not necessitate priming; however, if priming is employed, the use of an exterior primer is advised. The process should commence at the uppermost point and proceed in a descending manner, utilising the appropriate paintbrush. For surfaces of greater length and flatness, such as joists, columns, and slates, it is recommended to use both a brush and a roller.
What kind of paint won’t peel on concrete?
Concrete paints are typically low-luster acrylic latex paints designed to hide imperfections and resist sun and UV damage. Epoxy paint offers a durable and stain-resistant finish, while oil-based paint provides a tough, shiny finish. Solid concrete stains are similar to paint and can be applied like paint. Masonry paints are typically used for masonry applications but can also provide effective coatings for concrete.
Epoxy-based concrete paints are not recommended for porches and patios due to their appearance resembling garage floors. If you prefer a different paint finish, choose a different paint finish. Brands like rust-oleum are often advertised as garage floor paint, so it’s best to choose a different paint finish.
This post may contain affiliate links, from which the author may earn a commission at no extra cost.
Does painting outdoor concrete last?
Concrete patios can be painted with various types of paints, but not all exterior paints are suitable for them. Some products are specifically formulated for concrete patios and porches, with binders that allow the coating to expand and contract with the concrete. The best concrete paints resist fading, scuffing, peeling, mildew, and UV exposure. Most concrete porch and patio paints are heavy-duty acrylic latex formulas, available in various colors and finishes.
These water-based paints are eco-friendly, easy to clean, and come in matte, satin, or gloss finishes. However, they may require occasional touch-ups, especially in high-traffic areas. Using an anti-skid concrete patio paint can improve traction.
What is the most durable exterior paint?
The longevity of exterior paint depends on several factors, including the quality of the paint, environmental conditions, and the quality of the paint used. High-quality 100 acrylic latex paints like Sherwin-Williams Duration and Rhino Shield offer protection against fading, cracking, and peeling, while lighter paint colors like beige, tan, light brown, light blues, white, and light green reflect sunlight and heat away from surfaces, reducing UV damage and keeping the building’s exterior looking fresh longer.
Elastomeric wall coatings provide a waterproof barrier, and products like Rhino Shield come with long-term warranties. Professional application by experienced services ensures maximum durability, while regular maintenance, including cleaning surfaces, checking for damages, and applying sealants, preserves appearance and function over time. Sun exposure is a significant factor affecting the longevity of exterior paint on commercial and industrial properties.
How long does Valspar exterior paint last?
The exterior wood and metal paint is accompanied by a 15-year performance guarantee, thereby ensuring long-lasting protection for the trim. The product is suitable for use on a variety of surfaces, including walls, ceilings, kitchens, bathrooms, interior wood and metal, exterior surfaces, primers, and undercoats. The exterior paint is designed to offer durability and protection against weather conditions, while also providing UV resistance.
What kind of paint can be used on exterior concrete?
For optimal results, use specialist concrete paints like epoxy for bare concrete floors and quality masonry paint for walls. Spray paint concrete with a single pack floor paint, and apply using a brush or roller. Different concrete paints are better suited for specific areas, such as stairs with a non-slip, textured finish, or outdoor areas with UV protection and weather resistance. For stairs, opt for a non-slip paint for better grip, and for walls, opt for a quality masonry paint.
Can Valspar paint be used outside?
This product, crafted by hand in Italy using Dolomite lime and contemporary technology, is well suited for use on unpainted brick or stone surfaces, both interior and exterior. The product features a straightforward, single-coat paint process that can be applied using the Romabio Large Masonry Brush or a traditional paint sprayer.
What paint stays on concrete?
Acrylic latex and epoxy are two main types of concrete paint for concrete projects. Acrylic latex is a water-based formula that applies like any standard acrylic paint, eliminating the need for special tools, materials, or process steps. It is the most cost-effective option, but it is less durable, requiring frequent redoing on concrete flooring. The choice between these two types depends on the desired look, budget, and effort required for the job. Ultimately, the choice depends on the project’s specific needs and budget.
Why is my Valspar paint peeling?
In order to rectify issues pertaining to paint peeling or inadequate adhesion, it is recommended to utilise a paint scraper in order to remove any flakes, peels, or loose paint. Subsequently, the area should be covered with spackle, which should then be permitted to dry. Once dry, the spackle should be sanded until it is flush with the wall. Subsequently, any residual detritus should be removed and the area repainted. The majority of adhesion issues can be attributed to inadequate priming, paint, or application techniques.
Can you use Valspar paint on concrete?
Valspar® Masonry, Stucco and Brick Paint and Primer is a high-quality paint and primer designed to protect masonry, stucco, brick, and concrete blocks from chalking, alkali, and efflorescence. It also provides a mildew-resistant coating and shields against harsh weather. Optimized for interior/exterior vertical masonry, stucco, brick, and concrete blocks, it offers a mold, mildew, and algae-resistant coating, an ultra-flat finish, fade resistance, high pH resistance, and 100 acrylic latex. The product is recommended for properly prepared exterior walls and trim, including brick, cement, cinder block, stucco, and exterior wood and fiber cement siding and trim.
📹 NEW CONCRETE PAINT! How To Paint Concrete EASY DIY
EverythingAboutConcrete #MikeDayConcrete #howtopaintconcrete How to paint your concrete in 2023. Paint concrete patios …
I have been using Valspar floor and patio paint ( just like you used in this article ) in grey color (bought it off the shelf – no mixing from Lowe’s). I have been painting all the subfloors in my living room, dining room, and kitchen and it is working BEAUTIFULLY! I did NOT prime. I put down 3 coats and I have 90 lb. dogs with big toenails walking all over it. It’s holding up great. I’m really surprised. My paint was not thin at all. It’s almost too thick. I just bought another gallon to do more areas. It has urethane in it, which I think is making it so much more durable. Where I have painted are high traffic areas. I am, however, considering putting a coat or two of polyacrylic over the top as it seems to have a rough kind of finish (which is great for a no-slip surface). But for inside where I want to keep the floors good and clean, I think I was a surface that has a bit more sheen to it that will make it easier to sweep and mop as dirt seems to want to stick for the rough surface. I have also used this paint to paint tile that I then coat with polyacrylic and we are using this for our floors in the bathroom.
As far as porch and floor paints go, especially those designed to be fairly safe and sold to consumers, the valspar is actually pretty good. I mean your asking the paint to stand up to snow shoveling and honestly that’s a LOT to ask of ANY coating. That said there are some things you can do to improve the bond regardless of what kind of paint or coating you end up using. For prep you need to get off all of the previous paint you possibly can, that means a steel wire brush and TSP (trisodium phosphate) and really put your back into it. THEN etch the exposed concrete with muriatic acid to create a good fresh surface for it to bond to. THIS IS CRITICAL. I would not use any sort of stainblocking primer meant for walls, or any primer other than something the manufacturer recommends. The reason you are getting bubbles is either because the porch and floor paint is not compatible with the primer used, or more likely you waited too long in between coats and did not sand or scuff the bottom coat for the top coat to adhere. If you lay the second coat down before the first coat has fully dried (the manufacturer will usually specify the time window to recoat on the can) the layers of paint are able to bond chemically, but if you wait too long and the first coat has dried you will need to scuff sand the first coat so that the second coat can form a mechanical bond with it. These basic guidelines as far as prep and recoats should really help increase the quality and longevity of your painting.
Grind the surface and use decorative concrete. Also you should moisture test your concrete for your area. Your existing coating is only as good as your base. Primer doesn’t stop your first products from peeling. Save time and money and call a professional. I’ve been doing decorative concrete for 14 years and no paint is truly good for concrete areas, especially in snow areas.
Used this on a few surfaces about a year ago. It worked great on the concrete floor in my laundry room. I wanted to also test this out on the tile floor in my bathroom. It started peeling within a month or so, even though I cleaned, degreased, and sanded the tile, it did not stick, even when using a bonding primer. The areas that don’t get too much moisture did okay. So it seems to do best on rough surfaces where it can grab onto the material, and where it does not have prolonged exposure to moisture (such as under a bathroom mat or towel)