The expert at Benjamin Moore provides a comprehensive guide on how to paint exterior stucco walls, including steps to clean the surface, repair any cracks, prime the stucco, paint the stucco, let it dry, and apply a second coat. Stucco is a unique exterior wall surface that can be difficult to paint due to its rough surface. To achieve the best results, it is essential to understand the techniques and follow them carefully.
Preparation work involves filling cracks, pre-washing the stucco, and a special back-rolling technique. Applying the paint in multiple directions ensures coverage in all areas of the stucco, while working in small sections to maintain a wet edge. If needed, apply a second coat on rougher stucco or use a paint.
Maintaining routine maintenance on your stucco is crucial to avoid surprises like moisture issues. Sherwin-Williams Resilience Exterior paint is recommended for this purpose. For heavy textured stucco, spraying slightly up, face on, angled to the right, angled to the left, and top down is recommended.
- Clean the surface by pressure washing it to remove dirt and debris.
- Research local building codes and regulations.
- Prepare the surface by checking for efflorescence and removing it if present.
- Repair any cracks and other issues using a heavy nap roller.
- Prime new stucco with an appropriate acrylic primer and use a heavy nap roller to cut in the edges.
- Apply a coat of exterior masonry primer to the stucco, brushing it around the edges first and then rolling in the middle expansive area.
📹 4 Secret Painting Tips To Paint Stucco
4 professional tips painting stucco. The Idaho Painter exposes how to paint stucco like a professional painter. Painting Tips.
What is the best paint brush for rough stucco?
In the case of rough surfaces such as stucco or brickwork, it is advisable to utilise a brush with greater rigidity, such as the Purdy Pro-Extra® or the Chinex® Elite™. Rattail handles, which are long and narrow, provide a comfortable and productive grip, akin to holding a pencil.
How do you paint rough textured stucco?
When painting stucco, it’s crucial to research local building codes and regulations, prepare the surface, check for eflorescence, repair any cracks or damage, sand the stucco, prime the stucco, paint the stucco, and allow the paint to dry completely. This process not only changes the appearance of the home but also adds potential resale value. However, painting stucco requires more attention to detail and effort than regular walls. Proper surface preparation and enduring materials are key to success. DRYLOK products can be used to prepare the stucco surface for professional results every time.
What is the best paint for rough stucco?
Stucco is a durable and breathable material that can be painted with acrylic latex paint. This type of paint is ideal for stucco surfaces as it allows moisture to escape, prevents damage, and provides excellent coverage. It is also resistant to fading and chalking. Elastomeric paint, a rubberized paint, is also popular for its protective properties and longevity. However, it can trap moisture under the stucco surface, leading to mold and mildew issues.
Despite these drawbacks, elastomeric paint is a popular choice for stucco walls due to its thickness and water-resistant properties. Overall, the choice between acrylic latex paint and elastomeric paint depends on the specific needs and conditions of the stucco.
Can you paint rough stucco with a roller?
Stucco can be painted using a roller or an airless sprayer, with a brush not recommended. A roller is suitable for small jobs but can be overwhelming on larger projects. For larger jobs, consider using an airless sprayer. Use a deep nap roller (3/4 to 1″) to work the paint into the surface for a uniform surface. Stucco typically requires two coats due to its high absorption and to conceal cracks and other repairs. A deep nap roller is recommended for a uniform surface.
Do I need to prime stucco before painting?
Apply a primer/sealer to every inch of stucco surface to improve adhesion, reduce porosity, protect against new stain alkalinity, and bind residual pigments. Professional painters use special equipment to spray elastomeric paints, which are thick and difficult to apply. Combining spraying with backrolling is the best method for desired paint thickness. For historic stucco homes, professional maintenance is crucial to prevent deterioration, and patching and repainting should be left to a professional.
Is painting stucco a good idea?
Stucco exteriors can be damaged by moisture, leading to mold growth and structural issues. To prevent this, it is essential to paint them with high-quality paint, which provides an additional layer of protection. The variety of color options available for stucco walls allows for a unique look that sets them apart from other homes. Additionally, painting on stucco can protect the home from sunlight and UV rays, which can cause it to fade, discolor, and crack. By using high-quality paint, you can ensure the longevity of your paint and stucco. Overall, a well-painted stucco house can add a unique touch to your home.
Which roller would be best for painting a rough surface like stucco?
The Wooster Brush Company offers high nap roller covers for various surfaces, including textured plaster, stucco, siding, decks, concrete block, brick, and corrugated metal. These high nap heights provide better paint pick-up and release, making it easier to get into cracks and crevices. Lower NAP provides a smoother finish on smooth surfaces, while higher NAP provides better coverage on textured surfaces. The company provides quality roller covers for every project and offers customer service for further information.
Should you pressure wash stucco before painting?
In order to achieve a long-lasting stucco finish, it is necessary to perform a power washing, caulk cracks, and apply two coats of an elastomeric top coat. It is recommended that the work be commenced on a day with favourable weather conditions, namely warm and sunny. In addition, it would be prudent to rent a pressure washer. It is advisable to initially test the process on an inconspicuous corner before commencing work in the main area.
Should stucco be painted flat or satin?
For exterior stucco painting, consider using a flat finish paint as it has less sheen and reduces light reflection and shadowing. Trust UCI Paints, a trusted paint professional with over 50 years of experience, for your Florida painting projects. They offer high-quality enamel-based paints and a 100-year workmanship warranty. Contact their highly trained representatives at 954-581-6060 or through their contact form for any painting and order inquiries. Email customerservice@ucipaints. com for any painting and order inquiries.
Can you paint directly on stucco?
The decision to paint your stucco depends on personal preference. Some prefer resurfacing as needed, while others find it easy and affordable. If you’re unsure, ask for quotes for both projects to find the best fit for your budget. While painting isn’t wrong, it’s not necessary to maintain your stucco. Find the solution that works best for you and you’ll have a beautifully maintained home. Check out our Instagram for more stucco homes we’ve painted.
What happens if you don’t prime stucco before painting?
Prime stucco before painting to prevent moisture penetration and discoloration. A good, alkali-resistant primer can provide better coverage and performance. Dunn-Edwards (PRODUCTESPR00) is a good choice for new stucco with a pH level of 13 or lower. Hairline cracking is common with new stucco, allowing moisture to penetrate and activate salts. Dunn-Edwards FLEX-PRIME ® Masonry Primer bridges these cracks and stays flexible to minimize future cracking.
Top-coating the primer with an ultra-premium finish like Dunn-Edwards Ultra-Premium Exterior Paint promotes color retention and minimizes burnout. Spray application and back rolling are optimal results, as they force coatings into stucco and fill voids that may allow moisture penetration and alkali migration.
📹 How to Paint an Exterior Pebbledashed Wall
Woodie’s will show you how to paint an exterior pebbledash wall. You might think this is a difficult job but it’s actually quite easy.
I’m doing this right now,3bed house,side wall only,sandtex smooth paint. Some of You may try to hire a compressor but it want cover these tiny holes between pebbles, paint will stick on top of stones only even after second coat and i think You will use more paint that way than using a masonry brush which will allow You to do the job with one coat ! Just make sure You hit the wall really hard with brush just like that guy and generous amount of paint otherwise You will (again) not be able to cover these tiny holes ! So do it once but generously and stop if You feel tired and start again after breake. The roller was not helpful for me at all,maybe will be for someone to put a second coat but definitely will not do the job with the first one. If You are afraid of heights don’t start,hire somebody. Do a test and borrow a ladder just to check Your heights acceptance level by climbing on very top part of Your wall. If You are not able to do so,dont start Yourself. Wall Preparation is important,use sandtex fungicide then sandtex stabilise solution (primer) in dry conditions, means summer ! But before all this i recomend to cut all this dirt and algae with a pressure washer,fungicide will not remove bigger ones ! Otherwise You will have to wait ages untill fungicide will kill algae roots. So fungicide is really good AFTER pressure washing, prevent algae back,not really as a algae “rapid remover” which will be perfectly done by pressure washer. All You do just remember,this job will test Your patience cos attention for details is essential here !
Thanks for the tutorial, we have a pebble dashed house but it’s not roughcast like what you were painting. It has a lime render and the chippings thrown on after. The chippings can come off easily. How do you recommend painting this without losing too much of the chippings? Is it worth applying a slurry coat first to help bond the chippings before using a paint roller? Really appreciate your advice, thankd
Not as easy as he makes it look. You’ll end up dabbing more than anything and when theres more than one floor to deal with and sides you soon get pretty pee’ed off. Rollers don’t cut it either. I bought a airless spray gun. Double front room bungalow in 2 half days complete, large pebble dash. (mask and cover 3 days) Saturated the walls twice and layed off with a brush. Not sure the size of the place but did use a little over 40 litres of weathershield.
lol I’m a painter and this guy made to look easy on the article for viewers, guys this is a tedious stressful job to paint this kind of stucco a house will take you several days to complete it, and if you do it your self it will look like shit I’ll charge at list 5 dollars a squares surface ft or or w ill spray it but it wont look good because it has to many pores and holes.
Easy?! LOL. Even with the proper big heavy pile masonry rollers this is a very physical job. You need to have the roller absolutely loaded with paint and put a fair bit of oomph behind it to get the paint out and onto the roughcast. It’s taking me a day per wall of my house (2 floors) and that’s not counting the edging work leading to the rollering. Good article otherwise.
Thanks for the good vid. Just wanted to ask if or not it’s a good idea to paint in the winter months. Obviously I want a dry day but I’m thinking about how much longer it might take to dry in the cold etc. Any tips or advice for that or is it just a bad idea all together? Is there a minimum temperature it’s still ok to paint in? Thanks in advance.