How To Fix Squeaky Doors At Home?

To fix a sagging or sticking door without removing the door, follow these steps:

1. Identify the problem: Sticking doors can be caused by improper installation, sagging, or moisture-related issues. To address humidity-related sticking, use a dehumidifier in damper areas of your home and apply a moisture-resistant sealant to prevent the door from absorbing moisture.

2. Use a sharp paint scraper to remove paint or wood from the jamb where the door is stuck. If the issue is stripped screws, replace them to tighten the hinges and strike plate.

3. Close the door but don’t force it. Mark where it contacts the jamb and use an electric planer or sander to take it down to the desired location. Tighten the hinge screws in the door and the jamb, snug them firmly with a screwdriver to avoid stripping the screw holes.

4. Open doors throughout your home to improve air circulation and lower moisture levels. A longer-term solution is to use dehumidifiers.

5. Shim the door by adding shims to the top hinge. Use cardboard or plastic ones on Amazon. Tighten all hinge screws, especially the top hinge.

6. Check the door: If it still rubs, use an orbital sander with low-grit sandpaper.

In summary, fixing a sagging or sticking door requires identifying the problem, tightening the strike plate and hinges, replacing screws, and checking for loose hinges. This DIY task can save time and ensure a trouble-free home environment.