This article provides a comprehensive guide on how to repair mobile home siding, focusing on the benefits of adding siding to your mobile home and providing tips on how to do it properly. It highlights the importance of inspecting your mobile home’s siding after a storm or high winds, matching the siding by material, style, weight, grain, and color, cutting and square the damaged area, and fastening nails through the long nail-hem holes, leaving a tiny space between the head of the nail and the siding itself.
Replacing the siding on a manufactured home can significantly improve its appearance, energy efficiency, and overall value. This comprehensive guide will walk you through the installation and repair process, highlighting the importance of proper maintenance and safety measures.
Do-it-yourself siding installation and repair is a popular option for manufactured home owners looking to save money. However, before committing to a DIY project, it is essential to consider the best/lightest plywood for your mobile home. Aluminum siding repair requires patching a damaged area or replacing a panel, and this tutorial shows both techniques.
There are several methods to paint metal siding on a mobile home, including using light plywood as a base and using various methods to paint the exterior metal siding surfaces.
📹 (How To) Mobile Home Metal Siding Repair
Mobile Home Metal Siding Repair. #mobilehomerepair #mobilehomes How To Chang A piece of mobile home siding. We put a …
How do you repair a hole in metal without welding?
To clean metal, insert a metal patch behind a hole and spread filler around inside the hole with a paint stirrer. If the patch doesn’t stick, use epoxy filler. Filling in holes prevents rust and prolongs the metal’s lifespan. Protect yourself by covering your eyes and mouth with cut-resistant work gloves, wearing long pants and a long-sleeved shirt, and wearing goggles instead of safety glasses. Dust masks don’t completely seal over your mouth, so wear a respirator mask for maximum protection. Safety glasses won’t fully protect your eyes, so opt for goggles.
What is the best way to patch metal holes?
Epoxy and tape are two common no-weld hole repair options for small holes or rust. Epoxy is designed to patch steel and metal, and can sometimes be a permanent solution depending on the extent of damage and the quality of the patch job. It is important to apply a coat of primer to seal the patched area and prevent the hole from reforming.
Duct tape or aluminum tape is a quick fix for auto body damage and can be painted over to camouflage the repair job. However, it should only be considered a temporary solution.
For a more durable and permanent way to repair holes in metal without welding, consider using a UV repair patch. UV repair patches work by applying the patch to the hole or rusted area and waiting for sunlight rays to activate and harden it within a few minutes. If working in a dark spot without sunlight, UV light emitted from a lamp can be used to activate and cure the patch.
What is the life expectancy of metal siding?
Metal siding is a popular choice due to its durability and longevity, lasting 40-70 years depending on installation and care. It is highly resistant to rot, mildew, and rust, making it a long-term solution. Metal siding is low maintenance, requiring minimal cleaning and maintenance each year. To protect the paint from fading, a vinyl coating can be applied over the steel metal.
LP siding, made from wood fibers and resins and adhesives, is also popular due to its affordability and durability. With proper care and maintenance, it can last up to 25 years or more. LP siding requires minimal upkeep, making it a cost-effective and long-lasting option for homeowners.
Is it cheaper to paint or replace metal siding?
Painting your vinyl siding can void your manufacturer’s warranty, as any alteration will cancel out the warranty. This means that the manufacturer cannot maintain, repair, or replace your siding if you find any flaws. Painting is only possible during certain times of the year, and only certain colors will work with vinyl. Darker colors can make vinyl siding more heat-absorbent, causing it to bubble and warp during warmer months.
Painting your siding has a shorter lifespan than new siding, as it requires proper maintenance and may not be able to match the original color. Additionally, it may be harder to replace damaged panels in the future, and the manufacturer may not be able to match the painted-over siding.
Additionally, painting your siding may limit the latest advancements in the vinyl siding industry, such as adding shiny colors, details like scallops, and installing an underlayment for insulation and energy savings. Installing modern, updated vinyl siding can significantly increase curb appeal and value.
However, painting involves a greater margin of error and unpredictable results, making it more risky than replacing it. All application conditions must be right, including weather, paint color, and surface cleaning. If you choose to upgrade your siding and go with new, you can be confident that the results will be attractive.
Can you replace just one piece of aluminum siding?
Home siding installation can involve replacing a single board or section of siding, but it is generally not necessary unless it is damaged. Damage to a single board or panel can occur due to factors such as a storm, a baseball, or a branch. If a single panel or piece warps, it is best to replace it with a new one, especially for sensitive siding like wood. This is possible for most siding materials, especially vinyl, aluminum, and fiber cement.
However, removing a single board from the middle of a wall and replacing it with a new board without damaging the surrounding siding can be difficult, especially with more fragile materials. If you lack experience in home siding, it is recommended to consult a professional for the right fix.
What can I use to patch aluminum siding?
The hole in the existing aluminum siding should be sealed with butyl caulk. Subsequently, caulk should be applied in vertical lines, with a distance of three inches from the hole on either side.
How to fix holes in metal siding?
This tutorial teaches essential aluminum siding repair techniques for beginners. It covers how to patch a hole, cut out damaged areas, cut a patch 4 inches longer than the damage, and apply caulk. The tutorial covers the process of repairing aluminum siding, which joins together like vinyl, and demonstrates both patching and panel replacement. The estimated cost for this repair is $12 to $75+. The tutorial is designed for beginners and can be completed in 1 hour.
How do you repair siding without replacing it?
To patch minor damage to vinyl siding, clean the affected area and apply caulk to small divots. Cut out damaged siding, prepare a patch, install the patch, sand and paint the caulk. This DIY project takes about 1 hour and 30 minutes, with an estimated cost of $50. Regular maintenance is crucial for maintaining the longevity of your home and preventing insects and rodents from accessing damaged panels.
Siding maintenance also helps prevent moisture from seeping into the home, preventing hidden water damage. Patching or replacing damaged siding can restore the home’s exterior appearance, eliminating unsightly dents, divots, holes, or cracks. The estimated cost is $50.
Can you put new metal siding over old metal siding?
If you don’t have asbestos siding, it’s best to remove the old materials. While it may save money in the short term, installing new siding over old siding isn’t usually recommended by professionals. Overlaying new siding over old may cover hidden problems like insect infestations, dry rot, or structural damage, which may lead to more significant challenges in the long run. Therefore, it’s crucial to conduct a thorough inspection and address any underlying issues before installing new siding.
Can damaged aluminum siding be repaired?
Aluminum siding is not well-suited for holding colors and can fade over time, turning chalky. It is susceptible to dents, scratches, and holes, and does not insulate as well as other types of siding. Replacing aluminum siding is difficult due to color matching issues. It can be painted, but it is not easy to replace.
Vinyl siding is a better option for new construction and remodeling, according to the Vinyl Siding Institute. It is low maintenance, requiring only periodic inspection and occasional hoisting off. It is less expensive to maintain as it doesn’t require repainting. Today’s vinyl siding is impact-resistant and won’t fade over time. It is also energy-efficient, with foam-backed insulation from manufacturers.
Additionally, added insulation makes your home quieter inside, as it protects from outside noises better than aluminum. In summary, vinyl siding is a more cost-effective and environmentally friendly option for siding replacement than aluminum.
Can metal siding be repaired?
Structural damage to metal siding can result from various factors such as hail, falling objects, and improper installation. To repair this damage, follow these steps: identify the extent of the damage, cut out the damaged section with tin snips, align the replacement piece with the rest of the siding, secure it with screws or nails, and seal the edges with caulking.
Repairing structural damage is crucial for maintaining the siding’s longevity and aesthetic appeal. Consult a siding expert if the damage is beyond your repair capabilities or to ensure compliance with building codes. Water damage is another common issue that can cause swelling and mold growth, compromising both the siding and the home’s structure. To address water damage on metal siding, identify the affected area and remove the damaged section.
📹 Laying the First Panels – Metal Roof Install – Salvaged Mobile Home Rebuild
This video follows the process of installing the first metal panels on a salvaged mobile home roof. The homeowner explains the importance of pre-drilling the panels and the proper way to overlap them. They also discuss the importance of considering wind load when choosing roofing materials.
I stumble on y’all YouTube page? I’m subscribed to it because I love doing this kind of work, y’all doing, and I’m perusal the roof over Episode I used 1×4 Has my firing strips for my roof okay, I notice y’all do not use insulation under. The metal when I did mine. I did it the same way space. The ferring strips two feet And then I put foam installation in between my furing. Strips, Also You’re supposed to run a Strang from corner to corner. And that will be a mark for your overhang. That’s where I screwed up. It cost me. I still kick myself for that
Trying to get caught up with y’all. Good point about “wind weight”. You have to figure a 50-60 mph wind is something you’re likely to have a couple of times a year with a big thunder or tropical storm w/ our parts of the country. Fortunately, it’s a low ° ∠ of roof, so that does assist with that. One thing I’ve learned helping the landlord with metal-roofing porches is it can be a plumb calm day and as soon as you’re trying to get panels on the roof, that’s when breezes wants to wake up. >>:=p Good work as always, y’all.
I put this article in my favorite Playlist. Something about this article I loved so much was that it felt nostalgic and represented what a family should be. The team work, the kids playing in the background, the birds singing, the trees, the greenery around you and the fact that this is an investment that will be passed on to your kids… It’s so magical to me. Thank you so much for sharing this with us. Don’t stop planning more investment properties in the future. Having a passive income is a great investment. Stay safe. Have a lovely day.
I’m planning on doing this to a shed/garage that sits lower than your project. I would put the bolts where you are placing them. However I’ve considered placing them on the raised part of the metal to improve water runoff and keep everything (tree debris, etc) from piling up in that valley. I don’t have the plywood sheathing, just the rafters/perlins. So I have to work from a ladder. No snow load, in FL also, what is your opinion on the bolts? I’m entirely not a pro, just attempting some DIY on existing structures.
Looking good! Glad to see the metal sheets going on fairly easily and quickly. Too bad you don’t have a 3rd person to hand the sheets up to Doug, so he wouldn’t need to go up and down the ladder for each sheet. It looks you’re not using the screws with the cap that covers the rubber gasket, or am I not seeing very well? Once the other side is on, I think you’ll notice the inside of the home won’t get as hot when the sun is beating down on roof. Even the neighbor’s rooster got in on saying good-bye near the end of the article.
That is a perfect install of the rib roofing. I also really like the color you chose — not stark white, but still a cooler color for reflecting the heat. The only thing someone could question is a lack of stitch screws or butyl tape on the seams for the most extreme weather prevention measures, but you also still have the original roof underneath it and with your purlins spaced together as close as they are, it’s really doubtful you’ll ever have issues. I’m a typical over-killer on things. The roof is looking great! @17:45 That was the perfect Dad joke! Well played! Bravo!
You’re right about the straight screw lines looks amazing. I know you are but please be careful with slippy foot on the roof. Maybe move the bus closer😉? I was thinking how amazing even the inside looks at the beginning of the article. I’ve watched you repair the other mobile home and it’s a thing of beauty to watch it all come together. My favourite diy(fferent) website❤ How’s Belle doing with her drawings?
This is looking so good! Don’t you just love it when, you know what you’re doing and there’s always someone there to tell you you’re not doing it right. My ex uncle in-law had never had children, or even been married for that matter, but he was always the first one to tell you how to raise children. Anyway, it’s amazing how it’s looking so nice at this early stage! Bye kids 👋 nice to see you pitching in ! 😊 Have a nice day!
Lol Ashley as soon as you said eww and panned back over to the pretty new roof side I was waiting for you to say ahhh and just as I said it out loud you said it. I giggled and I have to share. Love you guys and it really is looking great. I cannot wait to see what color you all going to paint the outside.
I just want to say that I am so flabbergasted by the agility, strength, and sense of balance that both Doug and Ashley bring to this work. As an old man with arthritis, it’s amazing to watch Doug climb a ladder carrying a metal roofing sheet, walk nimbly across a roof stepping only on secure spots, and then drop into a full squat while reaching across to put in a screw several feet away. If there were a DIY Olympics, you two would be serious contenders for the gold!
Good Job guys, maybe, as there is no wind maybe put a few sheets up on the roof instead of climbing up & down the ladder. Thank you Ashley, you work all day on the roof, go home feed youre family, get kids ready for bed, then when its time to settle for the night have to edit article. Soo thanks Ashley. x x
Put “rubber boot” over the base of the white pipe. Oh, you already got a boot. You are ahead of me. Great work. As for your end ridges overlapping. Glad you are doing it correctly. It is common sense. I was going to replace my roof with new shingles. But after seeing and hearing you explain about the benefits of metal roofing and the simplicity (compared to shingles) of installing it. I will be doing the same. It is the labor that costs a lot. Now I just need to see if I would be allowed (with a permit) to do the job myself or if I must hire a contractor to install it. Personally, I prefer metal as it has less “drag” during winds. Shingles are rough. Snow will “stick” to it. Yes, load is important, even if there is no snow normally.
Get your a peace of wood on both ends of the roof input a string line on tight, when you get to the center of the roof you can’t measure the 2 inch overhang from the wood no more because of the oldness and settling and all, and how dare people say you lap the wrong way!! Wow!!!! And I just love yall, I pray one day I get to help yall one day
You sure got your exercise with climbing up the ladder with those metal sheets! You did a great job, it looks so good. We can really see the impact it is having on the appearance of the home. It was interesting to watch you place each sheet, especially the part around the pipe. Great teamwork again! 😊
Looking good! I wonder if the air gap between the old and new metal roofs will help keep the home cool. Since the old roof will be shaded by the new one you should have less radiant heat into the home, plus the standing ribs can provide a little ventilation to transfer some of the heat between the two roofs to the ridge cap and out. You commented previously that you could really feel the heat when you were working close to the inside of the old roof. Let us know if you notice a difference in the heat inside the home while you are working on it. Looking forward to seeing the other half!
Doug and Ashley, we love perusal your Podcasts, especially how you want to do everything correctly. Everything well done. Neat and tidy. How about keeping your beard trimmed ? Also neat and tidy. We have been perusal for about two years and plan to continue perusal every podcast you post. Thank you two for a clean show. No swear words or off color comments. Good job!!
Looks awesome. I can’t wait to see it all done up on top. Are you going to put some screening fabric (metal) in the pipe so you don’t get critters nests built up there. Our mobile was famous for that as was our motor home…….the air would back up and well, it just needs to be done. LOL LOL Hopefully they don’s nestle under the high point of the roof at the base where it is higher with inlet area and make nests. I am sure you’ve already thought of it all, as you usually do……….just an “old timer” curious and knowing some issues we had. It all is looking fabulous and I love the color your chose! Blessings
Man oh man oh man! I can sooo appreciate your OCD tendencies, Doug! The roof is looking phenomenal!!!!! It’s no longer bowed, and those screw lines!! Perfection!! 🤩 Fun fact: We used the same color metal to side our shop! Paired it with a matte black roof 😁 I agree with you 100% on ordering direct from a metal supplier! Wayyyyyy better than any big box store!! 👌🏻
Oh wow the roof is looking so incredible, Doug you are so great at doing all of these projects, that color that you picked is also so gorgeous, not too bright but very nice looking it is really beautiful. I am so excited to see your next article and how this roof is progressing. I also really think those screws are awesome and really look so good. Thanks so much again for another wonderful article that was a lot of fun perusal, and a metal roof really is a good kind of roof especially when there is rain or snow, I have an old metal roof on this car port that is leaking because I think whoever built it did not do that great of a job and I really want to get another new roof on that and pick a beautiful color not the metal color. Have a beautiful and blessed rest of your day, sending love and hugs, bye!! 😊😍🤗👋👋👍👍🙏💜💜💜
Doug, what an amazing job you’re doing on that roof. I’d hire you in a heartbeat to work on my home – except I live in Texas, and you’re not for hire. Lol. I like how you used the nibbler to cut out the area for the vent pipe. Did you use a scribe or just simple measurements to cut out the hole? Either way, it was a professional looking cutout. Ashley is so supportive of you. I admire her for that. Keep up the excellent work. Hugs from Midland, Texas.
The roof is looking great. Doug you continue to impress me by your work ethic, if something needs done you do it, even if it cost you more money, it’s called doing the job right, instead of just half ass construction and leaving it for the next guy. Your roof looks perfectly straight with no dips or valleys that I can see so it was worth using those shims. keep up the good work. 😀✌❤
Its looks so good, before & after shots, amazing! I really like the light gray, reflect a lot of our Florida sun, good choice. I’m in awe and so impressed by your work ethics; pre drilling 10 panels at one, genious. I’ve said this before but it’s worth repeating; if you need more filming content on repairs/ renovations, I’m in Pasco County. I have a 75 year old wood frame craftsman that coukd use some attention. I own the vacant lot behind my house, use it as my backyard, you’d have a place to park you bus, can run water & electric. Just a thought! Love you guys …
Doug, please be careful, my hubby fell off our roof about 8 years ago he spend a week in the hospital two operations broke his hip in five places, broke his left arm, lost muscle in that arm. He can’t raise it any higher than the shoulder and he spent three months in a wheelchair. I don’t wanna see y’all go through that?
Yay…another morning coffee article for me to enjoy…thank you! The roof is coming out so well. Love Ashley’s “ewww” and “ahhh” comparison when looking at the finished and unfinished sides. So nice to see the kitty come by to inspect the progress when you were both on the ground too. As I have said previously….that mobile is going to be better and more stronger than it was when it was new! Doug’s explanations of the correct way to do things is very educating…he is a great teacher in his quiet, patient and unassuming way…so enjoyable to watch the progress. looking forward to the next article! 😊
The results are stunning and seem to have put your mind at ease about the wisdom of installing a new metal roof rather than trying to patch the old roof. I think you have kept the costs to a minimum and the roof was worth every penny. However, I am wondering if you should have installed foam boards between the two roofs for support, thermal and acustic insulation, and moisture prevention.
I was thinking the siding is looking great when you started this job. Now the roof is looking great. Not the same old mobile home you started with! Hope you listen to yourself when you think it is time to quit. The accidents happen when you’re tired so don’t push it. That was a lot of climbing up and down with those sheets. BTW, they WILL catch the wind and knock you over if you hold them facing the wind so please take care. Nice to see Belle! It’s been a while for me, at least. Have a great week!
Night and day, or as Ashley said “EWWWWW and AHHHHHHH”! I thought of something at the very start when you were saying it was going to be a good day. When people say that things often go wrong. Maybe we should use reverse psychology on ourselves and say I don’t think it’s going to be a very good day today. If it isn’t, we’re right and aren’t disappointed. If things go well, we are pleasantly surprised. 🤣 It almost looks like a new trailer on the outside and will soon be the same on the inside! 👏👏👏👍👍👍
I love that you read comments that disagree with how you do things and then you come back and show and explain the reason why you do things the way you do. I appreciate your willingness to teach what you know and what you’ve learned. Loving the progress and perusal your family working together to meet goals. Your love and support for one another is evident every day! God bless your family and your properties!
Hi Doug, Wow, very nice work, it looks amazing and is definitely a professional job….!, it looks very even and very strong too the color is perfect. looking forward to the next article, Carmen and I want to send our regards to you, Ashley and the Kids take care guys. 🙏 From your friends here in Lima Peru George & Carmen
I have watched you IMPROVE every home you have lived in or owned. It’s satisfying to see you put care and pride of ownership in every project from customizing the bus, refinishing a mirror for Belle’s room, to refurbishing this mobile home. You do it thoughtfully, patiently and beautifully. ❤ 👍 good job